• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2011

This study presents characteristics of representative five hand dimensions including hand length, medius finger length, hand circumference, hand breadth and hand thickness, and hand scales by gender and age for Koreans. The study was based on data of hand dimensions published in 2008 by Korean Agency for Technology and Standards. The hand dimensions of males were nearly the same as those of females until age of 12~13(10~11 in hand thickness), but the males' were larger than the females' from age group of 14~15 or 12~13. The growth of the hand dimensions was found until age of 12~13(14~15 in hand thickness) in females and 16~17 in males. After the age groups, the hand dimensions was almost the same irrespective of age groups. ANOVA was performed to investigate significant factors affecting hand dimensions. Representative five hand dimensions were significantly affected by gender and age, while they were not affected by occupation. Two hand scales were proposed depending upon gender, for easily using hand characteristics in design stage of hand relevant products. In addition, regression equations were provided for quantitatively predicting hand dimensions on the basis of representative five hand dimensions.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.153-159
• /
• 2014

This study evaluates the changes of the subjective hand, preference, comfort and mechanical properties of tricot based artificial suede made from sea-island type micro fibers according to raising condition. The subjective hand and the preference of raised suede for jacket were rated by the 20's and 30's women experts according to raising cycles. Comfort properties were evaluated by air permeability, water vapor transmission, and thermal transmission. Mechanical properties were measured by the KES-FB system. The subjective hand of artificial suede was categorized into three hand factors: smoothness, warmness and thickness. Smoothness, warmness and thickness perception increased with raising cycles which affected hand preference and luxuriousness perception. The thickness and wale density of suede increased with the number of raising. Suede became more compact and less pliable and less stretchable due to increased fabric thickness; in addition, the surface of suede became smoother and compressive since the surface evenness of suede improved with smaller fiber fineness and an increased amount of naps covered the base fabric. Furthermore, water vapor transmission decreased and thermal insulation increased. The best raising conditions for artificial suede was four cycles in which artificial suede was preferred without changes in physical properties.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.9-14
• /
• 1997

From the experimental study of wire-cut Electric Discharge Machining for alloyed steel and tungsten carbide, the characteristics such as hand drum form has been observed and evaluated for various conditions. Hand drum form can be improved when gap voltage and spark cycle become smaller, their thickness become thinner, wire tension become larger and number of cutting is done so many times. When wire-cut 60mm thickness tungsten carbide in normal condition, Hand drum form becomes larger due to the low conductivity inducing cobalt composite rising by electrolysis.

• Journal of the Korean Home Economics Association
• /
• v.43 no.8 s.210
• /
• pp.115-122
• /
• 2005

The hand performs functions such as grabbing and other movements. In order to accomplish these movements in various kinds of operational environments, appropriate gloves must be worn to protect your hands. Choosing the appropriate type of glove is very important when wearing gloves in these types of operational environments. The reasons one wears gloves varies depending on age and gender. Unmarried women in their early twenties, for example, occasionally wear gloves for decoration rather than for functional reasons. However, previous studies examined a range of topics, and as such investigations dealing with specific body shape and demands of consumer are needed. Therefore in this study, the hands of unmarried women ranging in age from 20 to 24 were measured and hand shape types were analyzed in order to present basal data which can be used to help design improved glove patterns and produce appropriate, functional gloves. A total of 261 Korean women were measured. Fifty-seven right hand dimensions were measured and five dimensions from both hands were measured. Six factors were identified through factor analysis and those factors constituted $73.259\%$ of total variance. Two clusters of hand shapes were categorized using 6 factor scores by cluster analysis. Type 1 hand shape is defined as long hands with small width, girth, and thickness, long and thin fingers, and high vertical palm height. Type 2 hand shape is defined as short hands with large width, girth and thickness, short fingers, thick knuckles, and short vertical palm height. The characteristics of type 1 and 2 hand shapes are similar to women's hand type classification results from previous reports, but there was a significant difference in subject distribution by type. Therefore, standard data on hand shapes should be produced by developing measuring instruments and selling more accurate standard measuring points. By doing this it could help in the development of improved glove patterns, and also aid in planning production based on hand type.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.17-25
• /
• 2006

We performed the objective sensibility evaluation on knitted fabrics by the following procedures: setting acrylic fabrics with knitted fabrics as basis, knitted five kinds of blended spun yarns and four kinds of twisted filament yams made by different twisting methods(the amount and direction of twist) then, measuring mechanical properties in the use Kawabata Evaluation System, obtaining hand values and total hand values. The results are as follows: First, A(F)/W acrylic/wool spun knits obtain high scores in bending, compressing, shear properties, MMD, and thickness among five kinds of acrylic-blended knit fabrics. A(S)/W acrylic/wool blended knit represented prominent values at compressing properties and thickness and so wool-blended yams demonstrated superior characters comparing other blended yarns. To contrast, acrylic/rayon blended knits showed low scores in bending properties, shear properties and thickness, so that it affects to total hand values. On the one hand, among the four kinds of acrylic filament knitted fabrics, they do not exhibit any notable dynamic differences such as tensile properties of knitted fabrics by the twist number and direction of filament yarns, bending, shear, compressing properties, weight and thickness except surface properties. Second, fabrics showed the most high score at FUKURAMI (fullness and softness) among the hand values. A(S)/W acrylic/wool blended knits obtaining the lowest values at SAHRI (crispness) outrank at total hand values, so that it was the predominant knitted fabric in objective sensibility evaluation. In total hand values, five kinds of acrylic blended knits got a higher score than four kinds of acrylic filament knits, and the amount and direction of twist did not influence on total hand values among the four kinds of acrylic filaments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1300-1311
• /
• 2004

The aim of this study was to provide the 2 and 3 dimensional statistics requisite in the sizing system and design of gloves. The 64 2-dimensional static measurements were selected to provide information about hands. Participants in the study were 824 adults, aged between 18 and 64. To summarize the information from the measurement values, a Factor Analysis and a Cluster Analysis among multivariate analyses were performed. 3-D scanner was used for visual results of hand shape of each cluster. The results were as follows. Twenty-two items were used for the factor and cluster analysis in order to classify the adult hand shape. The variable quantities that are explained by a total of 3 factors amounted to under 79.37% of the variable quantities. The definition results of the factors related to the hands are as follows: Factor 1 is the horizontal dimension, the thickness of hand factor; Factor 2 is the height of the crotch; and Factor 3 is the vertical dimension of the hand. The adults' group hand was divided into 2 clusters according to a cluster analysis using factor scores. The characteristics according to hand type were as follows: Cluster 1 referred to high horizontal dimensions and thickness, rather small vertical dimensions and crotch height; and Cluster 2 represented the rather smaller horizontal dimensions and thickness but longer hand length than Type 1. To provide specific shape data of each cluster, 3-D scanner measurement was performed. 3-dimensional data base was developed for each cluster type and visual information was provided.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.649-654
• /
• 2011

Purpose: Split-or full-thickness skin grafts are used to reconstruct palmar skin and soft tissue defects after trauma or to release burn scar contracture on the hand. Glabrous skin defects should be substituted with similar skin to preserve function and aesthetics. The authors report their experiences with a technique that uses a full-thickness graft taken from glabrous skin on the ulnar edge of the palm for the reconstruction of soft tissue defects of the hand. Methods: During a three-year period from 2007 to 2010, 22 patients with burn scar contracture and 12 patients with post-traumatic skin defects on their hands were treated with full-thickness skin graft operations. The palmar skin and soft tissue defects after release of burn scar contracture or debridement of post-traumatic wounds were reconstructed with full-thickness skin grafts harvested from the ulnar border of their palms. All donor-site wounds were primarily closed. Results: The followup periods ranged from 3 to 25 months. Contractures of the hand were corrected without recurrence, and the grafts showed relatively good contour and color match to the adjacent fields. There were no reported complications such as significant color change or hypertrophic scarring. The grafted skin showed an average 5.9 mm static two-point discrimination obtained in fingertip reconstruction cases, indicating satisfactory reinnervation. Conclusion: Glabrous full-thickness grafts harvested from the palmar ulnar border is a very useful way of reconstructing soft tissue defects on hands, including fingertips, for function restoration, favorable aesthetic results, and low donor-site morbidity.

• Archives of Plastic Surgery
• /
• v.42 no.2
• /
• pp.164-172
• /
• 2015

Background The use of a tourniquet in hand surgery is generally accepted as necessary to create a clear visualization of the operative field. This study aims to determine the effectiveness of one-per-million tumescent solution (1:1,000,000 epinephrine concentration) in creating a bloodless operative field in post-burn hand deformity surgeries performed without a tourniquet. Methods This retrospective observational study was conducted on a series of 12 patients with post-burn hand deformities who underwent surgery between February 2013 and January 2014. A total of 29 operative fields were recorded. The one-per-million tumescent solution was used for hemostatis instead of a tourniquet. The clarity of the operative field, volume of solution injected, duration of surgery, scar thickness and density, and functional outcomes at least three months after the surgery were observed. The relationship of scar thickness and density with the clarity of the operative field was analyzed with the chi-square test. Results Of the 29 operative fields in which the one-per-million tumescent technique was used, 48.2% were totally bloodless, 44.8% had minimal bleeding, and 6.9% had an acceptable level of bleeding. Both scar thickness and density were shown to have a significant relationship with operative field clarity (P<0.05). Conclusions The one-per-million tumescent technique is effective in facilitating post-burn hand deformity surgeries involving meticulous, multiple, and lengthy procedures by creating a relatively clear operative field without the use of a tourniquet. Although scar thickness and density are associated with the clarity of the operative field, this technique can be considered safe and effective in creating a clear operative field.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.22-28
• /
• 1996

From the experimental study of Wire-Cut Electric Discharge Machining of STD-11 alloy steel and P-20 tungsten carbide, the characteristics such as hand drum form and discharge gap have been observed and evaluated for various conditions. Hand drum form can be improved when gap have been observed and evaluated for various conditions. Hand drum form can be improved when gap voltage and spark cycle become smaller, thickness become thinner, wire tension become larger and the no of cutting increases. When 60mm thickness tungsten carbide is cut in normal condition, hand drum form becomes larger due to the low conductivity machining allowance become slightly larger when peak discharge current and gap voltage become larger, or wire tension becomes smaller. Under the same condition, machining allowance of tungsten carbide is larger than alloyed steel by 1/100mm.

• Fashion & Textile Research Journal
• /
• v.19 no.1
• /
• pp.79-89
• /
• 2017

Sensory attributes and preferences that contribute to consumer satisfaction with artificial leather were measured by subjective evaluation, and subjective hand and preferences were analyzed in relation to its use. Using tactile and visual senses, 50 experts in fashion and textile industry evaluated leathers classified into two categories, suede and polyurethane coated, according to different manufacturing methods. They answered questions on subjective hand and preferences of different artificial leathers of various fashion items (jackets, purses, bags, shoes, boots, furniture, etc.), using specific adjectives to describe the hand properties. As a result, it was found that the subjective hand properties of artificial leathers were related to 'Thickness', 'Fullness/softness', 'Surface contour', 'Stickiness', and 'Elasticity'. The leather type from different manufacturing methods influenced their perceived hand and preferences relating to use. By use, different hands were preferred. The preferences for jackets and furniture of suede type leathers were related to their surface properties, whereas the preferences for items of the other type of leathers were associated with their resilience. On the other hand, in the case of polyurethane coated leathers, the preferences for jackets were significantly affected by their thickness, while those for the other items were influenced by their resilience and surface properties.