• KIEAE Journal
• /
• 제10권6호
• /
• pp.27-32
• /
• 2010

Approximately 20 percentage of energy consumptions in buildings is consumed as lighting energy. Thus, most of the corporations of lighting fixture have launched low energy products. However, many researchers focused on the only luminous efficacy for energy conservation and used the evaluating tool of study. This can not gauge the precise cooling load related on generated heat of artificial lighting. In order to assess an effect of the temperature variation of lighting resources, the main purpose of this study is to predict the generated heating energy from lighting by measuring the thermal variation in scale model to reduce external noise. Also this paper used MX100 data logger to record at an interval of 1 minute for 60 minutes for the temperature of interior lightings such as incandescent lamp, fluorescent light, halogen lamp and LED lamp. As a result, LED lamp generated the lowest heat. On the other hand, incandescent lamp did the highest.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.591-598
• /
• 1998

Light intensity and spectral characteristics of different types of fluorescent lamps were tested to investigate their possibility as the artificial lighting sources for the close illumination applied in the transplant production factory. Photosynthetic photon flux densitiy(PPF), illuminance and irradiance for all lamps decreased logarithmically with an increase of the vertical distance from the lighting source. The fluorescent lamp specially designed plant growth (PG lamp) showed a maximum spectral irradiance at the wavelength of 660nm. However, it showed lower irradiance than that of a standard fluorescent lamp at the range of wavelength between 500 and 600nm. On the other hand, PG lamp showed higher PPF and lower illuminance than those of the standard fluorescent lamp. The maximum peak of spectral characteristics for both of the single and twin three-bind fluorescent lamps was shorn at the wavelength of 545m and the next peaks were shown at the wavelength of 610nm and 435nm, respectively. Since the red fluorescent lamp has a narrower peak at the wavelength of 660nm, it may be useful for the supplementary red lighting. For three of standard, single three-band and twin three-band fluorescent lamps, the values of conversion factor for converting illuminance to PPF fell within the narrow range from 76 to 791x/$\mu$molㆍm$^{-2}$ ㆍs$^{-l}$ . However, for PG lamp, it was 29.71x/$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$. Also, the values of conversion factor for converting PPF to irradiance of fluorescent lamp used in this study ranged between 4.85 and 5.34$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$/Wㆍm$^{-2}$ .

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.277-283
• /
• 1999

For the purpose of leading horse mackerel Trachurus japonicus schools, mackerel Scomber japonicus schools and arrow squid Todarodes pacificus schools, which migrate to the Cheju coast and are caught by the set-net, to the set-net by attracting lamps, we made five attracting lamps and took a practical experiment in the Gwiduk and Dongbuk set-net fishing ground. In the set-net with two bag-nets, we compared the amount of catch of both bag-nets by the means of switching on and off the each attracting lamps in order, switching off the attracting lamps in order which had been switched on and moving an attracting lamp.In the bag-net with an attracting lamp, horse mackerel, mackerel and arrow squid were caught the most, on the other hand, yellow tail Seriola quinqueradiata, striped mullet Mugil cephalus were caught in large quantities in the bag-net without attracting lamp. File fish Stephanolepis cirrhifer, Dusky spinefoot Siganus fuscescens were caught evenly in both bag-nets regardless of an attracting lamp.This result indicates that the amount of horse mackerel, mackerel, arrow squid can be increased by the use of attracting lamps in the set-net fishing method.

• 한국콘텐츠학회논문지
• /
• 제12권12호
• /
• pp.25-34
• /
• 2012

최근 인터넷과 스마트폰 등과 같은 무선기기의 발달로 각 전문 분야별로 많은 언어 자원들이 인터넷 등에 활발히 공개되고 있다. 또한 이러한 정보들이 유용한지를 판별하기 위해 다양한 시스템이 개발되고 있다. 이러한 시스템을 구축하기 위해서는 데이터의 수집, 자연어 처리 등의 과정이 필요하다. 그렇지만 이러한 과정에 필요한 소프트웨어 및 데이터를 통합적으로 관리하는 시스템은 현재 미미한 상태이다. 이를 위해 본 논문에서는 이러한 과정에서 필요한 소프트웨어 및 데이터를 통합 관리하는 시스템인 uLAMP를 제안한다. 이 시스템은 경제적인 측면에서는 소프트웨어 및 데이터 자원의 중복 개발 또는 수집을 방지하여 비용을 절감할 수 있으며, 관리적인 측면에서는 소프트웨어 및 데이터 자원의 재활용성을 높일 수 있다. 아울러, 제안하는 uLAMP의 사용성 및 효용성 평가를 위해 사용자 설문을 진행하였으며, 이를 통해 데이터의 최신성과 사용자 편의성 측면에서 장점을 지니고 있음을 알 수 있었다.

• 한방안이비인후피부과학회지
• /
• 제24권1호
• /
• pp.181-191
• /
• 2011

Backgrounds : Pompholyx is a distinctive reaction pattern presenting as symmetric vesicular hand and foot dermatitis. Other than acute symptoms like itching and vesicles, chronic changes with scaling, fissure and pain may follow. As patients are treated by steroid for a long period, it tends to present side effects after quitting steroid treatment. Objectives : This study was carried out to investigate the effect of carbon arc lamp therapy and oriental medical therapy that venesection therapy, ointments and herbal medicine on chronic plantar pompholyx including steroids side effects. Methods : We treated one case of chronic plantar pompholyx which had continued about 10 years, including steroids side effects with venesection therapy, carbon arc lamp therapy, ointments and herbal medicine. To evaluate the results of this treatment, we categorized symptoms into six items which are vesicles, itching, fissures, pain, erosions and scales. Results : Except mild itching, vesicles and scales in a small area, all the symptoms were subsided. Conclusions : It is considered that various kinds of oriental medical therapy including carbon arc lamp therapy could replace steroid therapy which has many side effects.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.175-182
• /
• 2022

This work presents a simulation model for a specific UV disinfection system (UVDS) powered by a Photovoltaic System. The global UVDS also includes the electronic converters, Electronic Ballast, UV Lamp and Motor Pump. The equations that model the physical components' behaviour are connected to obtain a dynamic global model. The latter is converted in a Simulink/Matlab model, which allows to carry out simulation series concerning the entire UVDS. The physical parameters: the irradiation G and the temperature T, are considered as inputs. series of measurements carried out in order to show how these parameters affect the current, the voltage of the PVs and especially the value of the current of the UV lamp, on the other hand a study on the behavior and the evolution of the parameters of the motor pump such as the armature current, motor torque, speed of rotation and the water flow. The purpose of all this is to realize how important are the two parameters concerning the lamp current and the water flow because they are two very important factors to keep an adequate water quality.

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.54-60
• /
• 2013

Numerical analysis of the radiant heat characteristic around heatsink according to arrangement and shape of fin on 60W-LED lamp is conducted in this study. In the case of top blow blowing from upper side on LED lamp, there is just little difference in cooling characteristics according to the height of fin. On the other hand, the fin arranged side by side has the advantage of heat transfer enhancement by comparing with zig-zag type because it leads to more loss of flow. In case of making fin round to increase the amount of heat transfer, designing arrangement with the minimized loss of flow has the advantage of characteristic.

• 로봇학회논문지
• /
• 제3권2호
• /
• pp.81-90
• /
• 2008

While increasing demand of the service for the disabled and the elderly people, assistive technologies have been developed rapidly. The natural signal of human such as voice or gesture has been applied to the system for assisting the disabled and the elderly people. As an example of such kind of human robot interface, the Soft Remote Control System has been developed by HWRS-ERC in $KAIST^[1]$. This system is a vision-based hand gesture recognition system for controlling home appliances such as television, lamp and curtain. One of the most important technologies of the system is the hand gesture recognition algorithm. The frequently occurred problems which lower the recognition rate of hand gesture are inter-person variation and intra-person variation. Intra-person variation can be handled by inducing fuzzy concept. In this paper, we propose multivariate fuzzy decision tree(MFDT) learning and classification algorithm for hand motion recognition. To recognize hand gesture of a new user, the most proper recognition model among several well trained models is selected using model selection algorithm and incrementally adapted to the user's hand gesture. For the general performance of MFDT as a classifier, we show classification rate using the benchmark data of the UCI repository. For the performance of hand gesture recognition, we tested using hand gesture data which is collected from 10 people for 15 days. The experimental results show that the classification and user adaptation performance of proposed algorithm is better than general fuzzy decision tree.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.216-221
• /
• 2016

A sintering process for copper based films using a rapid thermal process with infrared lamps is proposed to improve the electrical properties. Compared with films produced by conventional thermal sintering, the microstructure of the copper based films contained fewer internal and interfacial pores and larger grains after the rapid thermal process. This high-density microstructure is due to the high heating rate, which causes the abrupt decomposition of the organic shell at higher temperatures than is the case for the low heating rate; the high heating rate also induces densification of the copper based films. In order to confirm the effect of the rapid thermal process on copper nanoink, copper based films were prepared under varying of conditions such as the sintering temperature, time, and heating rate. As a result, the resistivity of the copper based films showed no significant changes at high temperature ($300^{\circ}C$) according to the sintering conditions. On the other hand, at low temperatures, the resistivity of the copper based films depended on the heating rate of the rapid thermal process.

• 한국가구학회지
• /
• 제25권4호
• /
• pp.345-352
• /
• 2014

This study was carried out to develop eco-friendly wood street lamp (EFWSL) by using wood resources stacked in the forests after tree tending operations which were mostly abandoned, but economical as renewable wood resources for developing the wood coated street lamps with the effects of cost reduction and their attractive appearances. This study has led to the development of key compact structures of street-lighting wood poles (shaft) using laminated timber. The core technique in this study is related with producing the more stable wood poles (shaft) with the hole inside than wood poles exposed under the natural environment through applicable process to protect the wood from bursting and splitting. We also comprehensively developed the method to conserve the timber durability of wood shaft and connect the wood shaft with groove, race way to be located in the groove, locking ring, current stabilizer connected to the groove and luminaire support arm, base and hand-hole which was partly used in combination with steel materials and wood. Also we increased the utilization of abandoned and stacked woods after thinning in the forests such as Pinus densiflora, Larix leptolepis, and Pinus koraiensis plantations by maximizing the value of these natural wood resources as main materials of eco-friendly street lightings with the effects of cost reduction and attractive appearances and also the expectation of advertising effects of street lightings developed in this study.