• Journal of the Korean Society of Visualization
• /
• v.8 no.3
• /
• pp.41-48
• /
• 2010

A visualization study to evaluate bubble motion in a tab water filled cylindrical tank with a varying flow rate of compressed air is conducted. The flow rate of compressed air varies from 1 to 5 L/min. Time resolved images are acquired by a high speed camera in 10 bit gray level at 100 fps and the measurement volume is irradiated by a 230 W halogen lamp. It is observed that there are three different regions; the bubble formation region, the rising bubble region and the free surface region. During the rise of bubble, the shape is changed as if an elastic body. Based on the binarized bubble image, the mean diameters of rising bubbles are estimated at beneath of the free surface. As the gas flow rate increases, the mean diameter is increased and the rising velocity also increases with buoyancy force.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.284-295
• /
• 2008

For plastics samples, a method using combustion ion chromatography was selected as a method for rapid low-cost analysis to test whether hazardous substances are contained or not. Using combustion ion chromatography, a verification test for F, Cl and Br compounds generated a linear calibration curve with a correlation coefficient of $r^2$ = 0.999~1.000 in the calibration range from 0.5 to 4.0 mg/kg. The detection limits were found to be 0.005~0.024 mg/kg and quantitative limits were found to be 0.014~0.073 mg/kg. The recoveries of combustion ion chromatography using certified reference material (CRM) were found to be 95.5~104.9%. Based on these results, a proficiency test was conducted together with several laboratories in and out of the country, to make comparative analysis of the results from each laboratory. As a result, the data supported the use of combustion ion chromatography as an effective analysis method to deal with regulations for halogen-free electronic products and for other hazardous substances in the electronic products.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.529-535
• /
• 2020

The present study investigated the photodegradation of synthetic organic dye; violet-3B, without and with the addition of C-N-codoped TiO₂ catalyst using a visible halogen-lamp as a light source. The catalyst was synthesized by using a peroxo sol-gel method with free-organic solvent. The effects of initial dye concentration, catalyst dosage, and pH solution on the photodegradation of violet-3B were examined. The efficiency of the photodegradation process for violet-3B dye was higher at neutral to less acidic pH. The kinetics reaction rate of photodegradation of violet-3B dye with the addition of C-N-codoped TiO₂ followed pseudo-first order kinetics represented by the Langmuir-Hinshelwood model, and increasing the initial concentration of dyes decreased rate constants of photodegradation. Photodegradation of 5 mg L^-1 violet-3B dye achieved 96% color removal within 240 min of irradiation in the presence of C-N-codoped TiO₂ catalyst, and approximately 44% TOC was removed as a result of the mineralization.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.368-373
• /
• 2010

Objectives: This study investigated the effect of infection control barrier thickness on power density, wavelength, and light diffusion of light curing units. Materials and Methods: Infection control barrier (Cleanwrap) in one-fold, two-fold, four-fold, and eightfold, and a halogen light curing unit (Optilux 360) and a light emitting diode (LED) light curing unit (Elipar FreeLight 2) were used in this study. Power density of light curing units with infection control barriers covering the fiberoptic bundle was measured with a hand held dental radiometer (Cure Rite). Wavelength of light curing units fixed on a custom made optical breadboard was measured with a portable spectroradiometer (CS-1000). Light diffusion of light curing units was photographed with DSLR (Nikon D70s) as above. Results: Power density decreased significantly as the layer thickness of the infection control barrier increased, except the one-fold and two-fold in halogen light curing unit. Especially, when the barrier was four-fold and more in the halogen light curing unit, the decrease of power density was more prominent. The wavelength of light curing units was not affected by the barriers and almost no change was detected in the peak wavelength. Light diffusion of LED light curing unit was not affected by barriers, however, halogen light curing unit showed decrease in light diffusion angle when the barrier was four-fold and statistically different decrease when the barrier was eight-fold (p < 0.05). Conclusions: It could be assumed that the infection control barriers should be used as two-fold rather than one-fold to prevent tearing of the barriers and subsequent cross contamination between the patients.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.187-190
• /
• 2014

Four excellent halogen-free biphosphonate flame retardants (EBDMP, EBDEP, MBDMP, MBDEP) were synthesized through polycondensation and Arbuzov rearrangement reactions without using any solvents. The products were characterized by ESI-MS, FT-IR and $^1H$ NMR. The application of EBDEP in polyurethane soft foam was studied and the results illustrated its excellent flame-proofing properties.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.135-136
• /
• 2008

EU-Reach Regulation 대비 유해물질 대체약품 개발 프로그램인 SVHC(Substance of very high concern)로부터 환경친화적인 방염제의 스크리닝으로 LOI 30이상의 Halogen-free 유기계 Organo-Phosphonate 화합물들이 유력한 후보로 선별되었으며 여기에 반응형 저에너지 타입 아(메타)크릴계 광기능성기를 도입하여 에너지 절감형이면서 친환경적인 가공약제를 개발 하였다. 먼저 열경화형 타입중에서도 면섬유에 취급이 용이한 DMP(dimethylphosphite)를 출발물질로한 N-Methylol type의 열경화형 인/질소 타입 알코올 함유 면섬유용 방염제를 제조한후 -OH기에 광반응형 아크릴 기능성기를 도입하여 개시제와 함께 광경화 방염가공 후 물성에 관한 특성를 관찰 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.860-863
• /
• 2002

In this study, Ag thin films deposited on LCD-grade glass were etched using inductively coupled fluorine-based plasmas and the effect of various $CF_4$-based gas mixtures on the Ag etching characteristics were studied. When $CF_4$-based gas mixtures were used with $N_2$, due to the very low vapor pressure of etch products, etch products remained on the substrate after the etching. However, when $CF_4$ used with Ar, residue-free Ag etching could be obtained due to the removal of etch product by sputtering by $Ar^+$ ions.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.787-792
• /
• 2011

Under mild conditions and without any additional organic solvent, synthesis of carbamatoalkyl naphthols could be carried out in the present of two halogen-free Br${\phi}$nsted acidic ionic liquids, 3-methyl-1-(4-sulfonic acid)butylimidazolium hydrogen sulfate and N-(4-sulfonic acid)butylpyridinium hydrogen sulfate. A wide range of aromatic aldehydes easily undergo condensation with $\beta$-naphthol and methyl or benzyl carbamate to afford the desired products of good purity in excellent yields. The present methodology offers several advantages such as a simple procedure with an easy work-up, short reaction times, and excellent yields. The catalysts could be recycled and reused for several times without substantial reduction in their catalytic activities.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.563-565
• /
• 2009

We introduce the new modification approaches of photocrosslinkable poly (4-vinylphenol) (PVP) for low hysteresis organic thin film transistors (OTFTs). The dielectric layers were composed of different PVP resin, low molecular melamine, and halogen free photo-initiator. The low hysteresis OTFT from one of the organic gate dielectrics has been realized. The electrical performance of low hysteresis OTFT with photocrosslinkable PVP exhibited a field-effect mobility of 0.2 cm2/Vs, a threshold voltage of - 0.04V, hysteresis of 0.4V.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.296-298
• /
• 2004

본 연구에서는 압출성형에서 Nylon6 를 기재로 멜라민계 난연제를 사용하여 난연성 및 물성평가를 비교, 분석하였다. 멜라민계 난연제를 선택한 이유는 탈할로겐화 추세에 일조를 하며 연기가 적고, 생분해를 하는 물질이기 때문에 큰 장점이 있다. 또한 새로운 제품 및 적용범위를 발굴하기가 상대적으로 용이하다는 장점이 있기 때문에 멜라민계 난연제를 선택하였다. 난연 Test는 UL-94 측정방법을 이용하였고 물성평가는 UTM 측정기기로 인장강도, 연신율, 굴곡강도, 굴곡탄성율 측정하였다. 또 충격강도 시험기로 충격강도를 측정하였고, 물성평가 경우에는 난연제로 인한 물성저하를 최소화 하기위해 Nano-clay 를 첨가하여 비교하였다. 연구결과는 난연 Test 경우 난연제의 함량이 $5wt\%$ 이상이면 V0급으로 나왔고 물성평가에서는 Nanoclay를 첨가한 실험이 물성저하를 대처할 수 있을 정도의 결과로 보여 진다.