• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.6-9
• /
• 2000

InSb hall effect of multilayerd structures were investigated. According to variation of magnetic field measured hall coefficient, Hall mobility, carrier density and hall voltage. For the measurement of electrical properties of hall device, evaperated InSb thin film fabricated with series and parallel multilayers. We found that the XRD analysis of InSb thin film showed good properties at $200^{\circ}C$, 60 minutes. Resistance of ohmic contact increased linearly due to increasing current. Some of device fabrication technique and analysis of Hall effect were discussed.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.35-40
• /
• 2018

This study presents a vertical-type CMOS Hall device with improved sensitivity to detect a 3D magnetic field in various types of sensors or communication devices. To improve sensitivity, trenches are implanted next to the current input terminal, so that the Hall current becomes maximum. The effect of the dimension and location of trenches on sensitivity is simulated in the COMSOL simulator. A vertical-type Hall device with a width of $16{\mu}m$ and a height of $2{\mu}m$ is optimized for maximum sensitivity. The simulation result shows that it has a 23% better result than a conventional vertical-type CMOS Hall device without a trench.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.618-622
• /
• 2007

Recently, in accordance with elevation of the consciousness level of citizens, the desire for cultural life is on increasing, and according to this trend, it is the real fact that the demand of the Grand Performance Hall where various cultural events can be performed, is also on increasing. However, since the Grand Performance Hall in view of its distinctiveness, is required of the repletion or abundance of sound, it could be said that the sufficient examination and planning about this are indispensable from the designing stage. On this viewpoint, this Study has intended to design the performance hall that maintains the optimized acoustic capacity through an acoustic simulation for the object of the grand performance hall on the step of construction. After completion of the construction for Grand Performance Hall hereafter, if compare the data analyzed in such way with the actually measured acoustic performance, it is considered that the more optimized architectural acoustic design could be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.582-585
• /
• 2001

InSb temperature dependent hall effect of multilayerd structures were investigated. According to variation of magnetic field measured hall coefficient, Hall mobility, carrier density and hall voltage. For the measurement of electrical properties of hall device, evaperated InSb thin film fabricated with series and parallel multilayers. We found that the XRD analysis of InSb thin film showed good properties at 200$^{\circ}C$, 60 minutes. Resistance of ohmic contact increased linearly due to increasing current. Some of device fabrication technique and analysis of Hall effect were discussed.

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.658-663
• /
• 2002

Hall factor of electrons in $\Gamma$-valley is calculated as functions of temperature, impurity concentration, and nonparabolicity of conduction valleys by taking into account the current density obtained from the Boltzmann transport equation. The dependence of the Hall factor on the temperature is clearly shown in the case of the optical phonon scattering and that on the impurity concentration is obvious in the case of the ionized impurity scattering. As the nonparabolicity of the conduction band increases, the Hall factor due to the acoustic or optic phonon scattering increases, whereas that due to the ionized impurity scattering decreases. The change of the Hall factor can be analysed in terms of the dispersion of relaxation time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.12-12
• /
• 2010

The hall probe measurement system was used to measure the critical current distribution of superconducting coated conductor. The system consists of reel to reel moving apparatus, 7 array hall probe, a rotary encoder and permanent magnet. The magnetic field profile across the width of superconducting coated conductor using Bean's critical state model was calculated. The effect of various parameters of the formulas on the magnetic field distribution and the effect of shape and size of artificial defects, which were formed on the surface of SmBa2Cu3O7-d(SmBCO) coated conductor using laser marking system, on the hall probe magnetic field signal of the hall probe measurement system was investigated.

• 건축역사연구
• /
• 제6권3호
• /
• pp.23-44
• /
• 1997

There are two main halls in the Main Palace of the Koryo Dyansty in the 11th and 12th century. One, named Hoekyongjeon, was served only for special ceremony ; hundred Buddhist priests' sermons or receiption of Chinese emperor's letters. The other one, Kondukjeon, was used as ordinary throne hall. The ordinary throne hall was built when the palace was erected at the beginning era of the Koryo Danasty, while the special ceremony hall built after the reconstruction in the 11th century. The throne hall was located at northwest side of the special ceremony hall. Audience chamber and King's bedroom were located at west and northwest side of the throne hall. The basic layout of the Palace showed unsymmetrical shape. It seemed mainly effected by its undulating terraine. The acess road from main gate to the throne hall showed zigzag way, by following a stream penetrating the site obliquely, It could be said that the Main Palace of the Koryo Danasty achieved its originality on the aspect of unsymmetrical layout and zigzag acess road, which was not found in the former palaces.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.866-874
• /
• 2008

Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.165-170
• /
• 1995

This paper describes the fabrication and characteristics of a Si Hall sensor fabricated on a SOI (Si-on-insulator) structure. The SOI structure was formed by SDB(Si-wafer direct bonding) technology and the insulator of the SOI structure was used as the dielectrical isolation layer of a Hall sensor. The Hall voltage and sensitivity of the implemented SDB SOI Hall sensors showed good linearity with respect to the applied magnetic flux density and supplied current. The product sensitivity of the SDB SOI Hall sensor was average 600V/A.T and its value has been increased up to 3 times compared to that of bulk Si with buried layer of 10.mu.m. Moreover, this sensor can be used at high-temperature, high-radiation and in corrosive environments.

• 한국음향학회지
• /
• 제3권2호
• /
• pp.3-12
• /
• 1984

This paper is to suggest the optimum structure and the rating scale of PANSORI hall. The method of this study is as follows. 1. Consideration for the characteristics of OPANSORI and Beranek's music & acoustic theory. 2. To take advice from the expert. 3. The experiment and evaluation of a model. 4. The structure of PANSORI hall and the study of the availability in Beranek's rating scale of orchestra and opera. 5. The establishment of the rating scale in PANSORI hall. 6. The evaluation of the forms of performance in each hall. The result of this study, the proper hall in the performance of PANSORI is, 1. The initial time delay gap less than 25ms. 2. The reverberation time of the extents of 1.2 seconds. 3. The proper average bass ratio of 1.25 extents. 4. The distance from performers to audience is within 30 meters. 5. THE VOLUME OF HALL IS 450-7400 ㎥ extents. 6. It should be designed not to be a acoustical disturbancenoise, echo, and the unbalance of sound pressure level, etc.