• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.

• 한국정보통신학회논문지
• /
• 제18권3호
• /
• pp.497-502
• /
• 2014

본 논문에서는 지상파 디지털 TV 수신용 광대역 평면 다이폴 안테나 설계 방법에 대해 연구하였다. 코플래너 스트립으로 급전되는 평면 다이폴을 반 보우-타이형으로 소형화하였다. 급전 마이크로스트립 선로와 코플래너 스트립 선로 간의 밸런은 코플래너 스트립 중앙으로 삽입된 직사각형 패치로 구현하였다. 제안된 안테나는 이중 공진 구조로서 다이폴에 의한 공진과 밸런이 부착된 코플래너 스트립 선로에 의한 공진으로 구성된다. 제안된 안테나의 파라미터들이 안테나의 특성에 미치는 영향을 분석하고 지상파 디지털방송 주파수 대역인 470-806 MHz 대역에서 동작하도록 설계하였다. 설계된 안테나를 $95mm{\times}178mm$ 크기의 FR4 기판 상에 제작 후 실험을 통하여 연구결과의 타당성을 검증하였다.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.169-176
• /
• 2010

본 논문은 가시광 통신(Visible Light Communication)시스템에서 고속 데이터 통신을 위한 line coding 기술 동향을 연구하였다. 가시광 통신(Visible Light Communication)기술은 LED를 사용하는 기기에서 나오는 가시광선(RGB)을 이용해서 정보를 전달하는 기술로서 친환경적이고 에너지 절감효과와 유비쿼터스 네트워크 서비스에 응용이 가능하다. 최근에 들어 홈 네트워킹 필요성의 증가와 LEDs (Light Emitting Diode Technologies)의 개선을 통해 가시광 통신 시스템에 관심이 높아지고 있다. 고속의 데이터 전송을 위하고 에러 검출에 효율적인 홈 네트워킹 환경을 위한 LED-ID 시스템 성능분석을 위해 적합한 line coding을 연구하고 NRZ, AMI, 4B5B, HDB3 line coding을 이용하여 홈 네트워킹 LED-ID 모델에 적용하고 LOS환경에서의 성능 비교를 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.38-39
• /
• 2017

This paper proposes a new control method for an AC-DC Buck converter which is utilized as a front-end converter of a 2-stage high power density adapter. In the conventional adapter applications, 2-stage configuration shows higher power transfer efficiency and higher power density than those of the single stage flyback converter. In the 2-stage AC-DC converter, the boost converter is widely used as a front-end converter. However, an efficiency variation between high AC line and low AC line is large. On the other hand, the proposed conduction band control method for a buck front-end converter has an advantage of small efficiency variation. In the proposed control method, switching operation is determined by a band control voltage which represents output load condition, and an AC line voltage. If the output load increasesin low AC line, the switching operation range is expanded in half of line cycle. On the contrary, in light load and high line condition, the switching operation is narrowed. Thus, the proposed control method reduces switching loss under high AC line and light load condition. A 60W prototype which is configured the buck and LLC converter with the proposed control method is experimented on to verify the validity of the proposed system. The prototype shows 92.16% of AC-DC overall efficiency and 20.19 W/in 3 of power density.

• East Asian mathematical journal
• /
• 제31권3호
• /
• pp.321-335
• /
• 2015

The existence of at least one solution to a system of multipoint boundary value problems on an infinite interval is investigated by using the Alternative of Leray-Schauder.

• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.103-113
• /
• 2003

지문 인식의 성능을 안정적으로 유지하기 위해서는 지문 영상을 향상(Enhancement)시켜야한다. 그렇기 때문에 지문 영상을 향상시키는 방법에 대해 많은 연구가 이루어졌다. 그 중에서 대표적인 방법이 게이버 필터(Gabor Filter)를 사용하는 것이다. 그러나 GF를 사용한 지문영상 향상 방법은 처리 시간이 만이 소요되는 단점이 있다. 본 논문에서는 온라인(on-line) 환경에서 빠르게 지문영상을 향상시키기 위해 게이버 필터를 변형시킨 HGF(Half Gabor Filter)를 제안하였다. 제안한 HGF는 기존의 게이버 필터에 비해 연산량을 반으로 줄여 처리시간을 단축시킨 방법이다. 반면에 HGF로 향상시킨 지문영상은 GF를 적용한 경우와 거의 같은 효과를 갖는다. 본 논문에서는 HGF를 사용하여 GF로 지문영상을 향상시키는 경우와 거의 같은 결과를 얻을 수 있음을 이론적, 실험적으로 확인하였다.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.95-101
• /
• 2014

In this paper, UPS, with a built-in instantaneous sag drop compensation features, was developed to improve performance. The improved UPS, using instantaneous moving average method, compensates by quickly measuring the voltage and series inverter of half-bridge type, using line-interactive method that links with the voltage of the battery and power source, was developed. In addition, by developing a parallel inverter that uses a high-efficiency PWM switching method, overall UPS system was enhanced. To verify the performance of the proposed algorithm, single-phase 5[kVA] UPS systems were designed and the experimental system was constructed. The low-cost type of Cortex-M3 module CPU STM32F103R8T6 (32[bit]) is attached and the switching time of mode transfer was set within 4 [ms]. THD of the linear load operates in less than 3[%], and the stability of the output voltage operates in approximately ${\pm}2[%]$ range. The superior performance of the operations was confirmed with the system set as above.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.1024-1032
• /
• 2007

The flow characteristics with the impinging angles of defrost nozzle jet inside a commercial vehicle passenger compartment were investigated experimentally by using the two-dimensional duct-nozzle model. The shape of the nozzle contraction was designed according to the curved line of cubic equation to the vertical plan of the flow direction. The impinging angles, defined as the angle between nozzle axis and a vertical line to the windshield, were varied from the $0^{\circ}\;to\;80^{\circ}$. The mean velocity distributions, the half-widths, and the momentum distributions with the cases of both the free jet and the impinging jet onto the dummy windshield were measured. The impinging jet flows similarly with wall jet from $X/b_o=20$, and the impinging angle has an effect on the half-width of the impinging jet. The momentum distributions onto the windshield increased with the increase of impinging angle, and then their inflection point was observed around the impinging angle of $60^{\circ}$.

• Journal of Plant Biotechnology
• /
• 제47권4호
• /
• pp.330-336
• /
• 2020

Ex-situ conservation of the ornamental and medicinal orchid, Coelogyne stricta, was performed by mass propagation using seed culture. Propagation stages were optimized using full- and half-strength solidified MS medium with different phytohormones. Maximum seed germination (88 ± 0.5% over 6 weeks of culture) was achieved on half-strength MS medium supplemented with 15% coconut water. Maximum shoot numbers were found on full-strength MS medium supplemented with 1 mg/L BAP, 2 mg/L Kinetin, and 10% coconut water, while the longest root was developed on full-strength MS medium with 1.5 mg/L IBA. A 2:1:1 combination of coco-peat, pine bark, and sphagnum moss was found to be a suitable potting mixture resulting in 80% seedling survivability. The cytotoxic activity of extracts of both wild plants and in vitro-developed protocorms was determined using an MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay on a cervical cancer cell line. The wild plant extract inhibited the growth of 41.99% of cells, showing that this extract has moderate cytotoxic activity toward cervical cancer cells.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.65-74
• /
• 2021

A key factor that governs the wave interferences of a submerged body is the dimensionless Froude number. Computational Fluid Dynamics (CFD) is used to describe the resistance force coefficients and the generated waves of two SUBOFF submarine models. Grid independence studies are performed on two cases, totally and shallowly submerged cases, with four sets of computing meshes. The highest peaks are marked by red points at given wavelengths, a line is fitted to those points with a least-squares approximation, and the half wake angle at multiple Froude numbers is defined between the fitted line and the centerline of the free surface. The results show that when the depth of the target is 1.1D, constructive interferences occur at Fn = 0.3 and 0.5, while destructive interference occurs at Fn = 0.35 with distortion of the waveform. The half wake angle is less than 19.47° because of the interference between the bow and stern wave systems.