• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.613-616
• /
• 1998

In this paper, a model of a Eddy-current probe coil with a ferrite core in the presence of a half-space with a layer is developed. The half-space with a layer is accounted for by computing the appropriate Green's function by using Bessel transforms. Upon introducing equivalent Amperian currents within a core to explain effect to a impedance change in the coil due to a (ferrite) core, we derive a volume integral equation, The integral equation is transformed via the method of moments into a vector-matrix equation, which is then solved using a linear equation solver. Through the above processing, we computed impedance value in a Eddy-current probe coil due to a conductivity change of layer.

• Mass Spectrometry Letters
• /
• 제5권4호
• /
• pp.120-123
• /
• 2014

The interference of water vapor on the chemical ionization (CI) of hydroxyl radicals (OH) by sulfur hexafluoride ion ($SF_6{^-}$) was investigated using a flow tube system coupled to a high-pressure CI mass spectrometer. Water vapor, which is required to study heterogeneous reactions of OH under real tropospheric conditions, transforms the reagent ion $SF_6{^-}$ into $SF_4O^-$ and $F^-(HF)_n$, resulting in a substantial loss in CI sensitivity. Therefore, under humid conditions, peaks corresponding to OH are drastically diminished, while those corresponding to OH-water complex ions ($[OH(H_2O)_n]^-$) are enhanced. $[OH(H_2O)_3]^-$ was observed as the major OH species. The obsercation of $[OH(H_2O)_n]^-$ by isolating humid conditions to the CI region and preliminary ab initio calculations suggested that $[OH(H_2O)_n]^-$ ions were produced from reactions between OH ions ($OH^-$) and water molecules. An additional helium buffer flow introduced into the CI region reduced loss of the reagent ion and resulted in a partial recovery of OH peak intensities under humid conditions.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.275-282
• /
• 2004

본 논문에서는 30 Hz 프레임 율의 MPEG-4 simple profile 비디오 비트스트림을 15 Hz 프레임 율을 갖는 H.264 baseline profile 비디오 비트스트림으로 변환하는 트랜스코딩을 제안한다. MPEG긱의 블록 모드(block mode)와 움직임 벡터(Motion Vector) 정보를 H.264에서 이용 가능하도록 블록 모드 변환을 수행하고, MPEG-4의 움직임 벡터 보간을 이용하여 H.264에서 움직임 예측(Motion Estimation) 없이 정수 화소 단위로 움직임 벡터를 찾는 3가지 움직임 벡터 보간 (Motion Vector Interpolation) 방법을 실험한다. 이와 같은 방법을 이용해서 움직임 예측 시 소요되는 계산량을 줄이고 낮은 대역폭에서 심각한 화질 열화가 없는 트랜스코더를 제안한다. 실험 결과 제안된 방법은 직렬 화소영역 트랜스코딩에 비해 신호 대 잡음비(PSNR: peak signal to noise ratio)는 실험 영상에 따라 높은 비트율에서는 0.2dB에서 낮은 비트율에서 0.9dB의 손실이 있으나 전체 수행 시간은 3.2배에서 4배 빨라진다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제14권3호
• /
• pp.195-209
• /
• 2010

Utilizing a structure of operations known as Dissection-Motion-Operations (DMO), a set of mathematics propositions or area-formulas in school mathematics will be introduced through shape-to-shape transforms. The underlying theme for DMO is problem-solving through visual reasoning and proving manipulatively or electronically vs. rote learning and memorization. Visual reasoning is the focus here where two operations that constitute DMO are utilized. One operation is known as Dissection (or Decomposition) operation that operates on a given region in 2D or 3D and dissects it into a number of subregions. The second operation is known as Motion (or Composition) operation applied on the resultant sub-regions to form a distinct area (or volume)-equivalent region. In 2D for example, DMO can transform a given polygon into a variety of new and distinct polygons each of which is area-equivalent to the original polygon (cf [Rahim, M. H. & Sawada, D. (1986). Revitalizing school geometry through Dissection-Motion Operations. Sch. Sci. Math. 86(3), 235-246] and [Rahim, M. H. & Sawada, D. (1990). The duality of qualitative and quantitative knowing in school geometry, International Journal of Mathematical Education in Science and Technology 21(2), 303-308]).

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.85-87
• /
• 1994

In this paper, we present an object-oriented stereotactic radiosurgery planning system, which accepts medical images such as CT and angiography, transforms the coordinates to a reference frame coordinate, calculates dose distributions, and finally displays isodose curves over the images. The user finds an adequate one for radiosurgeries after performing computer simulations on different treatment parameter sets. The object-oriented design concept was fully applied to the system composed of seven manager objects of different classes: a patient information manager, a user-interface manager, a coordinate transformation manager, a blackboard manager, a dose calculation manager, an isodose curve display manager, and a report manager. All the user interactions are carried out through the use of mouse buttons. The performance of the system was verified by four physicians and two medical physicists, and now is being used in two clinical sites.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.136-140
• /
• 2006

We are developing a vol-oxidizer which transforms the spent $UO_2$ pellets into the $U_3O_8$ power through oxidizing process. The vol-oxidizer consists of furnace, filter, heater and valve etc. When the filter is blocked by the powder, the internal pressure of the furnace is increased owing to the air flow restriction. Then, the furnace vessel is swelled and deformed by it. In this paper, we proposed a procedure of the thermal analysis for furnace vessel design of spent fuel vol-oxidizer. In this work, we determined the thickness of the furnace through analyzing the internal pressure and the thermal stress of the furnace with respect to various pressure and temperature. To analyze the thermal stress, we used ANSYS 8.0 for constructing a FEM model of the furnace, and then analyzed it based on the ASME code. We also surveyed the material property and yield stress of SUS304 with various temperature. Analysis results are compared with the yield stress of the material. We manufactured the furnace and conduct the verification experiments.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.141-148
• /
• 2013

There are several problems in the conventional 2-D image processing and 3-D measurement systems. In the case of the 2-D image processing system, it is not possible to detect elevation data. In a 3-D measurement system, it requires a skillful operator and a lot of time for measuring data. Also, there exist data errors depending on operators. The limitation of detecting elevation data in the 2-D image processing system can be solved by laser diodes. In this study an algorithm that measures the accurate data in a subject face to be detected by combining laser diodes and a commercial CCD camera is developed. In the development process, a planar equation is developed using laser diodes and the equation is used to obtain a normal vector. Based on the results, an algorithm that transforms commercial CCD camera coordinates to 3-D coordinates is proposed. The completed measurement method will be applied to replace a manual measurement system for vehicle bodies and parts by an automated system.

• 드라이브 ㆍ 컨트롤
• /
• 제9권4호
• /
• pp.8-13
• /
• 2012

Recently, researches about the eco-friendly vehicles such as hybrid electric vehicle, fuel cell vehicle and electric vehicle have been actively carried out. The regenerative braking system is a key technology to improve the vehicle energy utilization efficiency because it transforms the kinetic energy to the electric energy through the electric motor. This new braking system requires cooperative control between electric controlled brake and regenerative brake. Therefore, it is necessary to establish fault-diagnosis and fail-safe evaluation criteria to secure reliability of the regenerative braking system. In this paper, the failure types and causes in regenerative braking system were analyzed. The transient behavior characteristics were examined based on fault-diagnosis and fail-safe upon failure of regenerative braking system.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.478-482
• /
• 1995

The iron-based Metglas 2605S3A amorphous alloy ribbons are annealed at $435^{\circ}C$ for various periods from 5 to 210 min, and the effect of annealing is investigated on the dc magnetic properties of the ribbon. Typical square-type hysteresis loops are observed for the ribbons annealed fo 5 min, indicative of the nearly complete removal of residual stresses which are produced during melt-quenching. As the annealing time increases, the coercivity increases and the shape of hysteresis loops transforms to round type and finally to sheared one at the longest annealing time of 210 min. These results may be explained by the formation of clusters with chemical shortorder and very fine crystallites (at the annealing time of 210 min), and the diffusion-induced stresses during the formation of the clusters. For the samples annealed for 5 min, very good dc properties of the squareness ratio, coercivity and maximum permeability are observed, but, rather unexpectedly, the initial permeability is found to be very low. These results are considered to be due to a simple domain structure consisting of very small number of $^{\circ}$ domains.

• 대한수학회지
• /
• 제59권2호
• /
• pp.235-254
• /
• 2022

Let ℍⁿ be the Heisenberg group and Q = 2n + 2 be its homogeneous dimension. Let 𝓛 = -∆_ℍⁿ + V be the Schrödinger operator on ℍⁿ, where ∆_ℍⁿ is the sub-Laplacian and the nonnegative potential V belongs to the reverse Hölder class $B_{q_1}$ for q₁ ≥ Q/2. Let H^p_𝓛(ℍⁿ) be the Hardy space associated with the Schrödinger operator 𝓛 for Q/(Q+𝛿₀) < p ≤ 1, where 𝛿₀ = min{1, 2 - Q/q₁}. In this paper, we consider the Hardy type estimates for the operator T_𝛼 = V^𝛼(-∆_ℍⁿ + V )^-𝛼, and the commutator [b, T_𝛼], where 0 < 𝛼 < Q/2. We prove that T_𝛼 is bounded from H^p_𝓛(ℍⁿ) into L^p(ℍⁿ). Suppose that b ∈ BMO^𝜃_𝓛(ℍⁿ), which is larger than BMO(ℍⁿ). We show that the commutator [b, T_𝛼] is bounded from H¹_𝓛(ℍⁿ) into weak L¹(ℍⁿ).