• Computers and Concrete
• /
• 제19권1호
• /
• pp.19-31
• /
• 2017

This paper uses modelling and experiment to perform a quantitative analysis for the gypsum and ettringite formations in cement pastes subjected to sulfate attack. Firstly, based on Fick's law and chemical reaction kinetics, a diffusion model of sulfate ions in cement pastes is proposed, and then the model of the gypsum and ettringite formations is established to analyze its contents in cement pastes with corrosion time. Secondly, the corrosion experiment of the specimens with cement pastes immersed into 2.5%, 5.0% and 10.0% $Na_2SO_4$ solutions are carried out, and by using XRD-Rietveld method, the phases of powder samples from the specimens are quantitatively analyzed to obtain the contents of gypsum and ettringite in different surface depth, solution concentration and corrosion time. Finally, the contents of gypsum and ettringite calculated by the models are compared with the results from the XRD experiments, and then the effects of surface depth, corrosion time and solution concentration on the gypsum and ettringite formations in cement pastes are discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.109-116
• /
• 2012

본 연구는 수산화나트륨(NaOH)으로 활성화된 슬래그 모르타르에 석고를 혼합하여 플로우, 응결시간 및 압축강도에 미치는 영향을 알아보고자 하였다. 실험에는 석고를 슬래그 중량에 대해 0~50%까지 혼합하고, 활성화제의 농도는 3M와 6M, 양생온도는 $20{\pm}2^{\circ}C$와 $35{\pm}2^{\circ}C$의 경우에 대해 실시하였다. 플로우와 응결시간시험결과는 석고의 혼합률이 증가할수록 증가하였다. 그러나 압축강도는 일정 혼합률까지 석고의 첨가량이 증가하면 증가하지만 그 이후로는 감소하였다.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.44-49
• /
• 2018

The use of fossil fuels is steadily increasing. The thermal power generation industry uses a lot of energy and emits a large amount of greenhouse gases. On the other hand, a desulfurization facility can be installed to remove sulfur content during boiler combustion process of the power plant. Dry desulfurized gypsum generated from dry desulfurization facilities is suitable as a $CO_2$ absorbing material due to the presence of CaO. In this study, the carbonation properties of dry desulfurized gypsum were investigated by carbonizing dry desulfurized gypsum via mixing with water and stirring. As a result of microstructural, XRD and thermal analyses of the carbonized dry desulfurized gypsum, the carbonation age was found to be suitable for 16 h. Dry desulfurized gypsum absorbs about 16% of $CO_2$ per unit weight.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.169-170
• /
• 2015

This study is the experiment for manufacturing the Lightweight non-cement matrix based on the blast furnace slag, paper ash. Materials like cement and blowing agent in foamed concrete is replaced by by-products fro blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with nature gypsum and α type gypsum by (0, 5, 10, 15, 20) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali-activator. Consequently, in the case of the density, plain showed the lowest density and it seems that specimen adding nature gypsum 5% has the best compressive strength and flexural strength. It is detemined that the strength is lowered in accordance with the α type gypsum replacement ratio is higher. The research that it can supplement the further intensity seems to be needed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.894-898
• /
• 2012

본 연구는 밭에서 발생하는 비점오염물질을 저감하기 위하여 기존의 볏짚거적을 이용한 저감방법에 PAM과 Gypsum을 처리하였을 때, 표면유출량과 기저유출량, 유사량 그리고 탁도 등에 미치는 영향을 모의하고자 하였다. 연구 방법은 인공강우 시험기와 토양상자를 이용한 실내실험을 통하여 지표피복재의 종류와 강우강도 그리고 경사도에 따른 직접유출량과 유사량을 측정하고 비교하였다. 경사도 (10 %, 20 %)와 강우강도 (30 mm/hr) 그리고 지표피복재의 종류에 따라 실험처리를 하였으며, 지표피복재는 볏짚(Rice straw mat)+PAM (Polyacrylamide)+Gypsum, 볏짚+PAM+톱밥 (Sawdust)+Gypsum, 볏짚+PAM+왕겨 (Chaff)+Gypsum으로 구분하여 제작하였다. 실험 결과 볏짚을 이용한 다양한 피복소재를 이용해 지표를 피복할 경우, 대조구(나지)에 대비 유출수량, 토양유실 그리고 탁도 저감에 큰 효과가 있는 것으로 나타났다. 지표를 피복한 처리구의 평균 표면 유출수량은 대조구와 비교할 때 72~85.6 %가 저감되었다. 그러나 동일조건의 Gypsum을 첨가하지 않은 연구와 비교 시 Gypsum의 혼용으로 인한 효과는 크지 않은 것으로 나타났다. 세분화된 강우강도와 경사도 조건에 따른 실험이 필요하지만 본 연구의 결과에 기초할 때, 지표의 피복과 토양개량제를 첨가하는 방법은 강우 시 발생하는 표면유출수와 유사 그리고 탁수를 저감시킬 수 있는 최적영농관리방법 (Best management practice)의 하나로 판단된다.

• 한국결정성장학회지
• /
• 제21권1호
• /
• pp.6-14
• /
• 2011

이수석고 상태로 존재하는 인산부생석고를 ${\beta}$형 반수석고가 되도록 탈수한 다음 급격히 수화시켜 석고성분 만을 미립의 침상결정이 되도록 하여 불순물과 분리하는 공정과 여기서 회수된 침상의 이수석고 슬러리에 무수황산나트륨 ($Na_2SO_4$)을 첨가하여 용해시키고 적당한 조건에서 탈수와 결정성장 조작을 행하여 고순도 이수석고 결정을 회수하는 공정을 제안하였다. 본 고에서는 상온에서의 미립 이수석고의 결정성장속도, 전체 공정 단계별 수용액 내 $Ca^{2+}$의 농도 변화, 결정질 석고의 입도와 회수율에 미치는 수중탈수 시간, 결정성장 온도, 강온속도의 영향에 대하여 조사하였다.

• 분석과학
• /
• 제13권2호
• /
• pp.158-165
• /
• 2000

배연탈황설비에서 생성된 석고 슬러리 및 석고의 순도와 불순물의 정량분석은 시운전중인 탈황설비의 성능시험시 최적의 탈황공정을 모색하는 데 유용한 자료를 제공할 뿐만 아니라 생성된 석고는 시멘트나 석고 보드 등으로 사용될 수 있으므로 품질관리의 측면에서도 매우 중요하다. 석고의 순도는 결합수분, 삼산황 및 칼슘이온의 농도를 측정한 다음 환산식에 의해서 gypsum($CaSO_4{\cdot}2H_2O$)의 형태로 변환할 수 있다. 성능시험시 시료의 수가 상당히 많으므로, 좀 더 간편하면서도 정확한 분석방법의 확립을 위해 여러가지 비교실험을 실시한 결과, 열분석을 통하여 결합수분을 측정하는 방법이 1시간 이내에 분석이 완료된다는 장점 외에 재현성 또한 아주 우수하였다. 그 외 실리카를 포함한 각종 석고의 불순물의 분석은 산으로 처리하는 방법과 융제를 사용한 용융법을 비교한 결과, 용융법이 훨씬 간편하고 정확한 결과를 나타내었다. 한편 소량의 탄산 마그네슘과 탄산 칼슘의 정량을 위해 사용되는 이산화탄소 측정장치의 트랩부분을 수정하여 이산화탄소 흡수제의 역류를 막도록 하였다. 열분석을 통한 결함수분 측정, 융제를 사용한 용융법 및 이산화탄소의 정량법으로 확립된 분석 방법을 통해 석고 슬러리 및 석고의 분석은 보다 짧은 시간내에 간편하면서도 정확하게 실시될 수 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.577-582
• /
• 1990

The synthesis conditions of fibrous calcium sulfate hemihydrate were investigated by using phosphogypsum and calcium sulfate hemihydrate. The unstable organogel was deposited by adding methanol to the saturated solution with gypsum at ageing temperature, and it was crystallized to fibrous gypsum hemihydrate while methanol was removed by rapid filtrating. In case of using calcium sulfate hemihydrate, fibrous $\beta$-calcium sulfate hemihydrate was formed by adding methanol of 67% to saturated solution at 6$0^{\circ}C$ and ageing for 5 minutes and filtering with suction. Minor components in phosphogypsum did not affect the reaction.

• Journal of Biosystems Engineering
• /
• 제11권2호
• /
• pp.14-22
• /
• 1986

This study was carried out to find a method which can be used to measure the soil moisture content of the soil bin exactly and quickly. And gypsum block is used as an instrument in measuring soil moisture content in the field of green house farming, etc.. However the characteristics of gypsum block, or the guide line of making gypsum block is not well introduced in Korea. So the information about gypsum block such as the density of gypsum, type of electrode, dimension of electrode, distance between electrodes, density of surrounding soil were included in this study and their effects on the relationship between soil moisture content and electrical resistance were investigated. The results of this study are as follows; 1. The grid type electrode was quicker in accessing the equilibrium condition and showed more sensitive response to the change of soil moisture content than the plate type electrode. 2. The longer the distance between the electrodes, the larger the electrical resistance, and the distance of 3 to 5 mm was recommended. 3. The larger the width of the electrode, the smaller the electrical resistance. However, there was no significance between the levels designed in this study. Considering the size of the gypsum block itself, the adaptible range of width may be 4 to 8 mm. 4. The higher the density of gypsum, the smaller the electrical resistance. And the block of lower density was broken down in the soil of higy moisture content. The optimum ratio of gypsum to water was 7:5. 5. The measuring system used in this study allowed simultaneous, multi-data acquisition. So this system using A/D converter can be applied to the measurement of soil moisture content of soil bin.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.321-325
• /
• 2020

Purpose: This study is to evaluate the accuracy of gypsum replica models made from various gypsum products. Methods: One main model was made of stainless steel by CNC milling process. Molds were formed from the main model, and the gypsum replica models were made using 8 types of type IV gypsum, 10 pieces each. The main model was digitized by a contact scanner (Incise; Renishaw) and the gypsum replicas were digitized by an optical scanner (E4; 3Shape A/S). The difference between the main model and the gypsum replicas were measured by inspection software (3D Systems). One-way ANOVA was performed to evaluate the statistical significance of differences between groups. In addition, the independent sample T test was performed to determine the difference between the conventional and scannable stone group (n=10, α=0.05). Results: The root mean square of the stone models were 7.24 ㎛ to 10.78 ㎛, and statistical significance was found between the two groups (SR, FR) and the other 6 groups (IS, SG, CA, CS, ER, EBG) (p<0.05). The accuracy of the gypsum replicas was 9.04 ㎛ and 7.62 ㎛ in the conventional and scannable stone group, respectively. There was statistical significance between the two groups (p<0.01). Conclusion: In the limited results of this study, the product with low setting expansion and the scannable showed high accuracy. Therefore, in order to obtain a stable and accurate scan model, it is more effective in terms of accuracy to use a scannable stone with a low setting expansion.