• 제목/요약/키워드: gun

검색결과 13,020건 처리시간 0.04초

남해안 일부 지방산 반지락의 Parvatrema속 흡충 피낭유충 감염상 (Infection status of Tapes philippinarum collected from southern coastal areas of Korea with Parvatrema spp. (Digenea: Gymnophallidae) metacercariae)

  • 손운목;채종일;이순형
    • Parasites, Hosts and Diseases
    • /
    • 제34권4호
    • /
    • pp.273-278
    • /
    • 1996
  • 우리 나라 남해안 일부 지방산 반지락에서 Panpctremc속 흡충의 피낭유충 감염상을 조사하였다. 1990년 9월에 경상남도 5개 지역과 전라남도 8개 지역을 직접 방문하여 현지산 반지락을 구입하여 인공소화법으로 조사한 결과 총 300개의 반지락 중 233개(77.7%)에서 1-273개(평균 54개)의 피낭유충이 검출되었다. 검출한 피낭유충은 V형의 배설낭. 구홉반의 측돌기, 복홉반과 떨어져서 맹장 사이 정중면에 위치한 생식공 등의 형태학적 특징을 토대로 Pqwokemo속으로 동정하였다 경남 사천군 용현면산. 전남 고흥군 도화면산. 장홍군 안량면산, 강진군 칠량면산 반지 락은 1000% 감염되어 있었으며 감염량은 각각 평균 71. 31. 80 및 42개이었다. 경남 남해군 고현면산. 의창군 구산면산 및 전남 고흥군 도화면산 반지락은 조사한 97.5-90.0%가 평균 117개, 28 개 및 76개의 피낭유충에 감염되어 있었다. 경남 남해군 설천면산 전남 여천군 화양면산. 승주군 별량면산 남해군 북평면산 반지락은 조사한 55.0-80.0%가 평균 6-25개의 피낭유충에 감염되어 있었다. 경남 고성군 삼산면산 및 전남 여천군 돌산읍산 반지락에서는 피낭유충이 검출되지 않았다. 이상의 결과로 우리 나라 남해안 일부 지방산 반지락에 Pawatremn속 흩충의 피낭유충이고 도로 감염되어 있음을 확인하였다.

  • PDF

전북 부안군과 경남 사천군 해안지역에서 발견한 이형흡충류 및 기타 장흡충류의 유행지 (Two endemic foci of heterophyids and other intestinal fluke infections in southern and western coastal areas in Korea)

  • 채종일;송태의
    • Parasites, Hosts and Diseases
    • /
    • 제36권3호
    • /
    • pp.155-162
    • /
    • 1998
  • 우리 나라 일부 해안 지역의 장내 기생충 감염현황을 파악하기 위해 전북 부안군 주민 153명 및 경남 사천군 주민 138명의 대변을 수집하여 셀로판 후층 도말법 및 포르말린-에테르 침전법을 실 시하였다. 전북 부안군의 기생충 감염률은 21.5% (33/153명)이었으며, 감염 기생충별 양성률은 이형흡충류 17.6%, 간흡충 2.6%, 회충 0.7%, 람블편모충 2.6%, 대장아메바 0.7% 및 작은와 포자충 0.75이었다. 경남 사천군의 기생충 감염률은 39.1% (54/138명)로서 이형흡충류 18.8%, 간흡충 12.3%, 편충 2.2%, 람블편모충 2.2%, 대장아메바 5.0%, 이질아메바 0.7%, 왜소아메바 3.6% 및 작은와포자충 4.3%의 양성률을 보였다. 부안군에서 이형흡충란 양성자 22 명으로부터 회수한 충체는 유해이형흡충이 총 3,284마리 (평균 149.3마리)였으며 표주박이형흡 충, 수세미이형홉충, 요코가와흡충, 미야타흡충, 자루이형흡충, 참굴큰입흡충, 긴이형흡충 및 Aconthopowphium kurogamo등이 중복 감염되어 있었다. 사천군에서 이형흡충란 양성자 중 6명으로부터 회수한 충체는 요코가와흡충이 총 3,007마리 (평균 501.2마리)였으며 유해이형흡충, 수 세미이형흡충, 긴이형흡충, 갈매기이형흡충 등의 이형흡충류가 중복감염되어 있었다. 이상의 결과로 우리 나라 남해 및 서해안 지역 주민들에서 담수어 또는 반염수어의 생식 습관으로 장내 흡충, 특히 이형흡충류의 유행이 지속되고 있음을 확인하였다.

  • PDF

네일 건(Nail Gun) 사고에 의한 경부 관통상 1례 (A Case Study of a Patient with Penetrating Neck Injuries caused by a Nail Gun)

  • 한종순;손유동;안지윤;안희철;권혁술;서강열;조광윤;박승민
    • Journal of Trauma and Injury
    • /
    • 제24권1호
    • /
    • pp.48-51
    • /
    • 2011
  • Powered by compressed air, a nail gun is an essential alternative tool to a hammer on any construction site. This useful machine launches nails at high speed, automatically embedding them in a piece of wood in only a fraction of a second. In spite of its convenience, life-threatening and fatal nail gun injuries can occur when a nail gun is misused, such as in a suicide attempt, or when the operator has insufficient training because combustion nail guns are capable of firing projectiles at velocities higher than 150 m per second. Although injuries by nail guns are rarely reported, there have been reports of nail gun injuries to the head and the trachea in Korea. In the emergency room, the authors experienced a patient injured by an accidental shooting of a nail gun while working in construction. In that accident, a nail penetrated the patient's cervical vertebra through the left cheek. This report is aimed at studying medical treatment for patients with penetrating injuries caused by nail guns.

거창군 중등교육세력권의 시.공간적 변화 (The Spatio-temporal Changes in the Sphere Influence of the Secondary Education in Geochang-Gun, Gyeongnam)

  • 이전;박우상;이종호
    • 한국지역지리학회지
    • /
    • 제12권6호
    • /
    • pp.656-670
    • /
    • 2006
  • 우리나라 대다수의 농촌 지역에서는 초 중등학교 학생 수 감소에 따라 교육기반이 붕괴 위기에 직면해 있으나, 경남 거창군에서는 외부에서 유입한 학생 수가 전체 고등학교 학생 수의 약 25%에 달하는 특이한 현상이 나타나고 있다. 거창군의 중등교육세력권은 1980년대에는 거창군의 접경지역에만 국한되었으나, 1990년대에 들어서부터 점차 전국적으로 확대되었다. 그러나 거창군의 중등교육세력권 확대는 전국적인 명문 고등학교로서의 위상을 확보한 사립 인문계 고등학교인 거창고등학교와 거창대성고등학교에 제한된 현상이라는 점에서 거창군 교육세력권은 불완전한 전국화로 특징지을 수 있다. 이러한 거창군 교육세력권의 시 공간적 변화에는 교육 정책 및 제도의 변화와 학교별 특성이 주요한 요인으로 작용하였다.

  • PDF

전라북도 서부 해안지역과 동부 산악지역 농업용 지하수 수질 평가 (Water Quality of Agricultural Groundwater in Western Coast Area and Eastern Mountain Area of Jeollabuk-do)

  • 조재영
    • Journal of Applied Biological Chemistry
    • /
    • 제54권3호
    • /
    • pp.218-224
    • /
    • 2011
  • 전라북도 서부해안지역(부안군)과 동부 산악지역(진안군, 장수군, 순창군)을 대상으로 328 지점의 농업용 지하수 수질특성을 비교 검토하였다. 조사항목은 지하수법에서 규정하고 있는 농업용수 관리항목인 일반오염물질 4개 항목과 특정유해물질 10개 항목이었다. 전라북도 서부 해안지역에서 일반오염물질의 일종인 염소이온이 기준치를 초과한 지점이 나타났으나, 모든 조사지점에서 농업용 지하수 수질기준을 충족하였다. 특정유해 물질은 거의 모든 조사지점에서 검출한계미만 또는 자연함유량 수준으로 검출되어 안전성이 확보되었다. 농업활동이 활발하고 논과 밭의 경지면적이 상대적으로 넓은 해안 인접 평야지가 중 산간지대 보다 농업용 지하수중 오염물질의 농도가 더 높게 나타나는 경향이었다.

경북 동부지역 소와 돼지에서의 톡소포자충 항체 조사 (Prevalence of antibodies to Toxoplasma gondii in cattle and pigs reared in eastern areas of Gyeongbuk province)

  • 서민구;장영술;이은미;박노찬;곽동미
    • 한국동물위생학회지
    • /
    • 제32권2호
    • /
    • pp.131-137
    • /
    • 2009
  • This study was conducted to determine the prevalence of antibodies to Toxoplasma gondii (TG) in cattle and pigs reared in eastern areas of Gyeongbuk province by ELISA. Among 368 sera collected from 119 cattle farms, 76 (20.7%) sera from 34 (28.6%) farms had antibodies to TG. Fifty (27.2%) out of 184 cattle in Uljin-gun and 26 (14.1%) out of 184 cattle in Yeongdeok-gun were positive. Pyeonghae (50.0%) in Uljin-gun and Dalsan (33.3%) in Yeongdeok-gun had the highest TG antibodies in cattle compared to other areas. Prevalence of TG antibodies in cattle was increased with age. Among 368 sera collected from 43 pig farms, 62 (16.8%) sera from 16 (37.2%) farms had antibodies to TG. Forty (21.7%) out of 184 pigs in Uljin-gun and 22 (12.0%) out of 184 pigs in Yeongdeok-gun were positive. Uljin and Puk (40.0%) in Uljin-gun and Yeonghae (33.3%) in Yeongdeok-gun had the highest TG antibodies in pigs compared to other areas. Prevalence of TG antibodies in sows was higher than that in fattening pigs. Seasonally, prevalence of TG antibodies in pigs was highest in summer (23.4%) and lowest in winter (12.5%). Based on these observations, data indicate that infection by the protozoan parasite TG is widely prevalent in cattle and pigs reared in eastern areas of Gyeongbuk province.

반도체 Package 공정용 EMC Gun에 관한 연구 (A Study on the Semi-conductor Package Process Epoxy Moulding Compound Gun)

  • 조명현;김규성
    • 전자공학회논문지 IE
    • /
    • 제43권4호
    • /
    • pp.83-92
    • /
    • 2006
  • EMC를 정량 Moulding 후 잔량 처리와 작동 시 역 차단 방식의 설계하여 기계적 동작에 의해 흡입이 일어나도록 하여 Needle Tip의 잔량과 사인 현상을 해결하였다. 본 논문에서는 Gun과 세척제 Tank를 직결하도록 설계하여 세척이 용이하며, 원하는 량을 미리 계량하여 정밀 정량을 고속으로 EMC를 Molding 할 수 있도록 개발하기 때문에 반도체 Packaging 공정에 필수적인 장비라고 사료된다.

건타입 버너의 토출공기에 대한 선회기의 스월 수 영향 (Effect of the Swirl Number of Spinner on the Exhaust Air of the Gun Type Burner)

  • 고동국;윤석주
    • 한국분무공학회지
    • /
    • 제20권2호
    • /
    • pp.70-75
    • /
    • 2015
  • Swirl flow in the gun type burner has an impact on the stabilization of the flame, improvement of the combustion efficiency. The swirl flow is created by the spinner which is inside the airtube that guide the combustion air. Gun type burner has generally the inner devices composed electronic spark plug, injection nozzle, combustion device adaptor, and spinner. These inner components change the air flow behavior passing through airtube. So, this study conducted the measurement using by hot-wire anemometer and analyzed effect of the swirl number of spinner on the exhaust air of gun type burner. Turbulence characteristics come up in this study was mean velocity, turbulence intensity, kinetic energy, shear stress and flattness factor of the air flow with the change of the distance of axial direction and tangential direction from the exit of the airtube.

함정전투체계의 적응형 모의사격시뮬레이터 설계 및 구현 (Design and Implementation of Adaptive Naval Gun Fire Simulator on a Naval Combat System)

  • 김규백;조홍규;김동성
    • 한국군사과학기술학회지
    • /
    • 제21권5호
    • /
    • pp.630-639
    • /
    • 2018
  • This paper proposes the design and implementation of adaptive naval gun fire simulator on a naval combat system. The proposed simulator can log data, analysis logged data, modify the BCU(Ballistic Computing Unit) S/W in real-time, and evaluate gun fire performance to check it satisfy requirement or not. When the simulation result satisfies the requirement, the BCU S/W is installed on onboard system. The simulation results show that similar result with actual naval gun fire reslult.

전자빔건 헤드유니트의 설계와 제작 (Establishment of Gun Head Unit for Electron Beam Machining System)

  • 강재훈;이찬홍;최종호
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1875-1878
    • /
    • 2005
  • It is not efficient and scarcely out of the question to use commercial expensive electron beam lithography system widely used for semiconductor fabrication process for the manufacturing application field of various devices in the small business scope. Then scanning electron microscope based electron beam machining system is maybe regarded as a powerful model can be used for it simply. To get a complete suite of thus proper system, column unit build up with electron beam gun head unit is necessarily required more than anything else to modify scanning electron microscope. In this study, various components included ceramic isolation plate and main body which are essentially constructed for electron beam gun head unit are designed and manufactured. And this electron beam gun head unit will be used for next connected study in the development step of scanning electron microscope based electron beam machining system.

  • PDF