• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.484-489
• /
• 2003

In this paper, a single phase driven piezoelectric motor design was presented for linear motion Two metal/ceramic composite actuators, a piezoelectric ring which was bonded to a metal endcap from one side, were used as the active elements of this motor. The motor was composed of a piezoelectric ceramic, a metal ring which has 4 arms, and a guider. Motors with 30 [mm] and 35 [mm] diameter were studied by finite element analysis and experiments. As results, the maximum speed of motor was obtained at resonance frequency. When the applied voltage of the motor increased, the speed was increased. Also, bidirectional motion of the motor was achieved by combining two motors which have different resonance frequency. But the characteristics of bidirectional motion were not equaled, because of the problem of reproduction on the fabrication and the experiment. If present motor is used at the auto-zoom device of a camera, it will have much advantage. Because the direct linear motion can be achieved with a simple structure of motor and no gearbox of total system.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.84-89
• /
• 2001

The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web and to the quality of the final web products. But, the perfect alignment of the rollers is not always possible and the web itself can be cambered. Thus the control of lateral behavior of the moving web is critical in the most of web handling systems. The web guiding system that adjusts the angle of the alignment between two adjacent rollers is commonly used in industry. But, in this paper a new web guiding system is proposed by using the lateral dynamics of the moving web induced by a tilted roller in normal direction of a web. The computer simulation study was carried out to verify the steering performance of the suggested guiding system. Computer simulation study shows that the performance of the new guiding mechanism is better than that of an existing guiding mechanism.

• Explosives and Blasting
• /
• v.34 no.3
• /
• pp.1-9
• /
• 2016

The shaped charge were made for identifying the effect of controled blasting using relatively low VOD explosive for cutting rock mass with changing quality and thickness of metal liner. The metal liner was attached on both sides of a charge for directional cutting, when the shaped charge exploded in rock mass. Also, a efficiency of shaped charge was identified by concrete member experiment. And a center guide used for maintaining stand-off between shaped charge and hole wall. A case of Fe liner of thickness 0.8mm formed the deepest notch of experiments and the directional cutting of concrete member was identified.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.4 s.25
• /
• pp.7-15
• /
• 2004

The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between $30\%$ and $40\%$ because of relative high impact loss. The purpose of this study is to research the reciprocal relation among each parameter. Experiments and numerical analyses are conducted on effects of a stabilizer and a rearguider on performance analysis of a cross-flow fan. Two-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard $k-{\epsilon}$ turbulence model. Experiments are also carried out to estimate the performance of the modeled cross-flow fan. It is clarified that the rearguider of Archimedes type has excellent results for the most part.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.25.3-25.3
• /
• 2009

To search for the quasars at z > 7 in early universe, we are developing a optical camera which has a $1k\times1k$ deep depletion CCD chip, with later planned upgrade to HAWAII-2RG infrared array. We are going to attach the camera to the cassegrain focus of Otto Struve 2.1m telescope at McDonald observatory of University of Texas at Austin, USA. We present the design of a hardware interface to attach the CCD camera to the telescope. It consists of focal reducer, filter wheel, and guiding camera. Focal reducer is needed to reduce the long f-ratio (f/13.7) down to about 4 for wide field of view. The guiding camera design is based on that of DIAFI offset guider which developed for the McDonald 2.7m telescope.

• Journal of Korean Academy of Nursing Administration
• /
• v.22 no.2
• /
• pp.129-136
• /
• 2016

Purpose: The aim of this study was to identify nurses' role in the delivery of health guidance service within the annual health guidance membership service. Methods: Dynamic job analysis process was applied with vertical job analysis and horizontal job analysis through a focus group workshop and expert survey. Results: As a result of this study, job description was established with 4 duties, 11 tasks, 60 task elements. Major duties consisted of 'professional nurse practice', 'coordination and cooperation', 'education and consultation', and 'administrative work and improvement'. A job process map was also framed. Conclusion: The results can be used to establish nurses' role in providing health care service. Ongoing research on nurse's role as a health guider will be a fundamental base for health care service development and will contribute to expansion of common health management services.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.144-149
• /
• 2005

본 논문에서는 $CAVEW^{TM}-like$ 시스템과 같은 대형 디스플레이 기반의 몰입형 시뮬레이션 환경에 필요한 인터랙션 기법을 제안한다. 축소 모형(miniature) 인터랙션은 원거리에 있는 객체를 쉽게 선택하거나 조작하기 위하여 가상 세계 전체를 축소하여 사용자 근처에 디스플레이하고 이를 조작함으로써 대상 객체와 상호작용 할 수 있도록 해준다. 또한, 조감도(bird's eye view)로 표현되는 지도상에 사용자 위치를 표시하여 가상 세계 탐색시 이동 경로를 쉽게 파악할 수 있도록 하였다. 축소 모형은 투명 패널 인터페이스를 통하여 보여지며 사용자는 이를 이용하여 택타일 피드백(tactile feedback)을 제공 받을 수 있다. 그리드(grid)를 이용한 비주얼 가이더는 가상 세계 내에 그리드를 디스플레이하여 대상 객체와 사용자간의 위치 관계를 쉽게 파악할 수 있도록 해준다. 일반적으로 대형 디스플레이 환경에서의 인터랙션은 정확한 깊이 인식이 어렵기 때문에 인터랙션 시사용자의 불필요한 행위를 유발하게 된다. 본 논문에서 제안하는 기법은 이 같은 문제점을_개선하여 객체 조작 시 느껴지는 피로감을 최소화 시킬 수 있으며 다양한 몰입 및 상황 기반 시뮬레이션 어플리케이션에 적용되어 활성화 될 수 있다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1870-1872
• /
• 2005

In this study, an ultrasonic level limit sensor with a new structure utilizing the acoustic impedance matching is proposed to be able to check it out a change of water-level. 2 PZT resonators with the same property are bonded directly on the polyethylene plate. One resonator is for transmitter as an ultrasonic transducer, the other one is for receiver. In this case, a polyethylene plate will operate as an acoustic guider to transmit a transverse wave between 2 PZT resonators in air. While in the water, a polyethylene plate having a similar acoustic impedance with the water will be emitted an acoustic energy into the water as a longitudinal wave. According to this mechanism, there was a wide difference of acoustic signal output between underwater and in air. As a summary, this proposed level limit sensor could be used as a strong candidate with low cost and more stable one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.352-353
• /
• 2005

In this paper, an ultrasonic level limit sensor with a new structure utilizing the acoustic impedance matching is proposed to be able to check it out a change of water-level. 2 PZT resonators with the same property are bonded directly on the polyethylene plate. One is for transmitter as an ultrasonic transducer, the other one is for receiver. In this case, a polyethylene plate will operate as an acoustic guider to transmit a transverse wave between 2 PZT resonators in air. While in the water, a polyethylene plate having a similar acoustic impedance with the water will be emitted an acoustic energy into the water as a longitudinal wave. According to this mechanism, there was a wide difference of acoustic signal output between underwater and in air. As a summary, it is believed that this proposed level limit sensor could be used as a new one with strong toughness from the external electrical and mechanical noise.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.440-443
• /
• 2005

The wide spread of internet business recently necessitates recommendation systems which can recommend the most suitable product fur customer demands. Currently the recommendation systems use content-based filtering and/or collaborative filtering methods, which are unable both to explain the reason for the recommendation and to reflect constantly changing requirements of the users. These methods guarantee good efficiency only if there is a lot of information about users. This paper proposes an algorithm called 'demand articulate & integration' which can perceive user's continuously varying intents and recommend proper contents. A method of knowledge classification which can be applicable to this algorithm is also developed in order to disassemble knowledge into basic units and articulate indices. The algorithm provides recommendation outputs that are close to expert's opinion through the tracing of articulate index. As a case study, a knowledge base for heritage information is constructed with the expert guide's knowledge. An intelligent recommendation system that can guide heritage tour as good as the expert guider is developed.