• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.36-41
• /
• 2012

General condensers consist of many tubes supported by tube sheets and support plates to prevent the deflection of the condenser tubes. When a fluid at high pressure and temperature runs over the tubes for the purpose of transferring heat from one medium to another, the tubes vibrate and their surface comes into contact with the support plates. This vibration causes damage to the tubes, such as cracks and wear. We propose an ultrasonic guided wave technique to detect the above problems in the support plate region. In the proposed method, the ultrasonic guided wave mode, L(0,1), is excited using an internal transducer probe from a single position at the end of the tube. In this paper, we present a preliminary experimental verification using a super stainless tube and show that the defects can be discriminated from the support signals in the support region.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.35.1-35
• /
• 2002

$\textbullet$ Sliding mode control (SMC) with nonlinear interpolation in variable boundary layer (VBL) is proposed $\textbullet$ A sigmoid function is used for nonlinear interpolation in VBL. $\textbullet$ The Parameter of the sigmoid function is tuned by fuzzy controller $\textbullet$ The choice of parameter for the sigmoid function is guided by FC. $\textbullet$ The parameter is continuously updated as boundary layer thickness varies. $\textbullet$ The proposed method hasbetter tracking performance than the conventional linear interpolation $\textbullet$ To demonstrate its performance the proposed control algorithm is applied to a nonlinear system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.37-39
• /
• 1994

We have investigated the characteristics of planar optical waveguides formed by silver ion-exchange. Experimental values of the effective indices of guided modes were obtained by measuring the synchronous angles of strongest coupling. Definition of an effective diffusion constant leads to the mode-dispersion curves applicable over a wide range of fabrication conditions. In order to compare experimental and theoretical results, We have plotted each mode index of a wide range of fabrication conditions.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.90-91
• /
• 2003

정사각형 (sqaure) 구조 미소공진기는 Q값이 큰 4-bounce whispering gallery mode (WGM)가 존재 할 수 있고, 외부 도파로와 표면감쇠파 결합을 통해 상호작용할 때, 결합 길이가 매우 길어질 수 있어, 광통신용 Add／Drop Filter, 광집적회로 등의 저문턱 미소공진기 레이저 등의 광소자 분야에 적용하려는 연구가 최근 진행되고 있다. 그러나 단일 경계면을 갖는 사각 공진기는 공간 모드가 매우 많은 multimode 특성을 띄기 때문에 응용에 있어 단점이 된다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.225-229
• /
• 1989

Taking the normal mode transmission direction perpendicular to the substrate, an alternative equivalent network formulation is developed for the analysis of optical strip waveguides. All kinds of mode couplings between the normal modes are included in this formulation. Compared to the previous equivalent network formulations, the calculations are simplified especially when the thickness of the uniform slab is thin enough such that no well guided modes are available along the uniform slab waveguide.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.72-79
• /
• 2005

The leaky dispersion characteristics of a circular dielectric rod were investigated using Davidenko's method for several lower-order transverse magnetic(TM) modes. The normalized complex propagation constants were precisely determined and their tolerances below $10^{-10}$ compared with zero for both real and imaginary parts. It was also checked whether the normalized complex propagation constants obtained represented forward leaky waves. The leaky modes existing below the cutoff frequency of the guided mode were classified as a nonphysical mode, reactive mode, antenna mode, and spectral gap based on a precise determination of the complex propagation constants. Finally, the effects of the dielectric constant and radius of the dielectric rod on the leaky dispersion characteristics were also considered.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.697-708
• /
• 2017

The complex battlefield environment makes it difficult to intercept maneuvering targets for guided missiles. In this paper, a finite-time convergent (FTC) guidance law based on the second-order sliding mode (SOSM) control theory is proposed to achieve the requirements of stability, accuracy and robustness. More specifically, a second-order sliding mode observer (SMOB) is used to estimate and compensate for the total disturbance of the controlled system, while the target acceleration is extracted from the line-of-sight (LOS) angle measurement. The proposed guidance law can drive the LOS angular rate converge to zero in a finite time, which means that the missile will accurately intercept the target. Numerical simulations with some comparisons are performed to demonstrate the superiority of the proposed guidance law.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.356-360
• /
• 2002

Leaky modes on a circular dielectric rod are investigated from the precisely determined normalized complex propagation constants using Davidenko's complex root finding technique. Below the cutoff frequency of the guided mode, distinct frequency regions that have unique properties are observed, such as nonphysical region, antenna mode region, reactive mode region, and spectral gap region. The effects of tro design parameters, dielectric constants and the radius of the rod, to the leaky mode characteristics are also considered.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.311-318
• /
• 1994

We fabricated fiber-optic polarizers utilizing polarization selective mode coupling between the guided mode of a fiber and the surface plasmon mode supported by a thin aluminium film deposited on the polished side of a fiber. AI thin films with various thicknesses were coated onto the 633 nm, 830 nm, 1.3 fJITI single mode fibers. The maximum extinction ratio was higher than 30 dB for most of the samples and the best result was 42 dB at 90 A film thickness, with 1.3 fJITI single mode fiber. The insertion loss ranged from 0.2 dB to 1.5 dB.1.5 dB.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.39-45
• /
• 2009

The attenuation of the fundamental non-torsional modes that propagate down buried steel water pipes has been studied. The mode shapes, mode attenuation due to leakage into the surrounding medium and the scattering of the modes as they interact with pipe joints and fittings have been investigated. In the low frequency region the mode predicted to dominate over significant propagation distances approximates a plane wave in the water within pipe. The established acoustic technique used to locate leaks in buried steel water pipes assumes that leak noise propagates as a single non-dispersive mode at a velocity related to the low frequency asymptote of this water borne mode.