• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.407-416
• /
• 2018

The study aims to explore the possible link between lifelong education and local education·training projects to enhance vocational skills. To this end, we first looked at vocational training in lifelong educational institutions. We looked at the areas of lifelong education presented by the Lifelong Education Act and the status of job improvement in them, as well as the actual number of learners across the country. Next, we looked at local education training projects. In this case, We investigated the significance and type of education·training projects, and identified the number of programs and the number of learners. Looking at them, we looked for five possibilities the possible link of between vocational abilities and educational·training projects. The five were to strengthen employment related lifelong learning of the economically inactive population, to strengthen lifelong education related to the underprivileged people, to enhance vocational skills for lifelong education centered on the employed, to utilize lifelong education institutions and universities in the region, and to strengthen the role of local governments to guide local job demands and suppliers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.341-350
• /
• 2023

The templated grain growth (TGG) method has gained significant attention for its ability to produce highly textured piezoelectric ceramics with significantly enhanced performance, making it a promising method for transducer and actuator applications. However, the texturing process using the TGG method requires the optimization of multiple steps, which can be challenging for beginners in this field. Therefore, in this tutorial, we provide an overview of the TGG method mainly based on our previous published works, including its various processing steps such as synthesizing anisotropic-shaped templates with size and size distribution control using the molten salt synthesis technique, tape casting, and identifying key factors for proper alignment of the templates in the target matrix system. Our goal is to provide a resource that can serve as a basic reference for researchers and engineers looking to improve their understanding and utilization of the TGG method for producing textured piezoelectric ceramics.

• Archives of Plastic Surgery
• /
• v.50 no.5
• /
• pp.514-522
• /
• 2023

Background This is a prospective study on 118 patients who underwent lymphaticovenous anastomosis (LVA) due to secondary lower limb lymphedema between January 2018 and October 2020 to evaluate patients' quality of life (QOL) using the Quality of Life Measure for Limb Lymphedema (LYMQoL) questionnaire. Methods The outcome measurement included the LYMQoL leg scoring system tool evaluating the function, appearance, symptom, mood, and overall outcome. In addition, correlation analysis was performed for three factors: based on International Society of Lymphology (ISL) stages, disease duration, and amount of volume reduction. Results The LYMQoL tool overall satisfaction score significantly increased at all intervals from 4.4 ± 0.2 preoperative to 6.5 ± 0.3 postoperative at 12 months (p < 0.001). Significant findings were seen for each domain scores compared preoperatively and at 12 months: function score (18.6 ± 0.5 to 15.4 ± 0.6), appearance score (17.8 ± 0.5 to 16.0 ± 0.6), symptom score (11.8 ± 0.3 to 8.9 ± 0.4), and mood score (14.5 ± 0.4 to 11.4 ± 0.5; p < 0.05). The correlation analysis between improvement of the overall score and the ISL stage (p = 0.610, correlation coefficient [r] = -0.047), disease duration (p = 0.659, r = -0.041), and amount of limb volume reduction (p = 0.454, r = -0.070) showed no statistical significance. Conclusion The QOL of secondary lower limb lymphedema patients was significantly improved after LVA regardless of the severity of disease, duration of disease, and amount of volume reduction after LVA. Understanding the patient-reported outcome measurement will help the surgeons to manage and guide the expectations of the patients.

• Journal of Intelligence and Information Systems
• /
• v.29 no.4
• /
• pp.347-373
• /
• 2023

As the significance of ESG (Environmental, Social, and Governance) management amplifies in driving sustainable growth, this study delves into and compares ESG trends and interrelationships from both corporate and societal viewpoints. Employing a combination of Latent Dirichlet Allocation Topic Modeling (LDA) and Semantic Network Analysis, we analyzed sustainability reports alongside corresponding social media datasets. Additionally, an in-depth examination of social media content was conducted using Joint Sentiment Topic Modeling (JST), further enriched by Semantic Network Analysis (SNA). Complementing text mining analysis with the assistance of ChatGPT, this study identified 25 different ESG topics. It highlighted differences between companies aiming to avoid risks and build trust, and the general public's diverse concerns like investment options and working conditions. Key terms like 'greenwashing,' 'serious accidents,' and 'boycotts' show that many people doubt how companies handle ESG issues. The findings from this study set the foundation for a plan that serves key ESG groups, including businesses, government agencies, customers, and investors. This study also provide to guide the creation of more trustworthy and effective ESG strategies, helping to direct the discussion on ESG effectiveness.

• Journal of Music and Human Behavior
• /
• v.21 no.1
• /
• pp.49-68
• /
• 2024

This study aims to acoustically analyze Korean language characteristics and convert these findings into musical elements, providing foundational data for evidence-based music-language rehabilitation. We collected voice data from thirty men and thirty women aged 19-25, each providing six-syllable prosodic units composed of two accentual phrases, including both declarative and interrogative sentences. Analyzing this data with Praat, we extracted syllabic acoustic properties and conducted statistical analyses based on acoustic properties, sentence type, gender, and particle presence. Significant differences were found in syllable frequency and duration based on accentual phrases and prosodic units (p < .001), with interrogative showing higher frequencies and declaratives longer durations (p < .001). Female frequencies were significantly higher than males' (p < .001), with longer durations observed (p < .001). Particle syllables also showed significantly stronger intensities (p < .001). Finally, we presented melodies converted from these acoustic properties into musical scores based on pitch, duration, and accent. The insights from this analysis of six-syllable Korean sentences will guide further research on developing a system for melodizing large-scale Korean speech data, expected to be crucial in music-based language rehabilitation.

• Journal of Science Education
• /
• v.33 no.2
• /
• pp.336-345
• /
• 2009

The purpose of this study is to analysis ERF components patterns of causal questions generated during the observation of biological phenomenon. First, the system that shows pictures causing causal questions based on biological phenomenon (evoked picture system) was developed in a way of cognitive psychology. The ERF patterns of causal questions based on time-series brain processing was observed using MEG. The evoked picture system was developed by R&D method consisting of scientific education experts and researchers. Tasks were classified into animal (A), microbe (M), and plant (P) tasks according to biological species and into interaction (I), all (A), and part (P) based on the interaction between different species. According to the collaboration with MEG team in the hospital of Seoul National University, the paradigm of MEG task was developed. MEG data about the generation of scientific questions in 5 female graduate student were collected. For examining the unique characteristic of causal question, MEG ERF components were analyzed. As a result, total 100 pictures were produced by evoked picture and 4 ERF components, M1(100~130ms), M2(220~280ms), M3(320~390ms), M4(460~520ms). The present study could guide personalized teaching-learning method through the application and development of scientific question learning program.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.563-573
• /
• 1999

The purpose of this study was to evaluate the availability of computer system for the measurement of tooth size in the model analysis through the comparison of two measurements: One was to use a computer; and the other was to use vernier calipers. Twenty sets of casts were used, which showed a moderate degree of crowding and full eruption of all teeth. The mesio-distal width of 12 teeth from the left central incisor to the left first molar at each set of the casts were measured twice with vernier calipers and a computer respectively. This measurement was repeated two weeks later. First, for the reproducibility analysis, the two computer measurements were compared then the vernier calipers measurements were compared. Second, all the teeth were sepapated into the region of mesiodistal contact points and its width was measured by a micrometer to obtain standard measurements. For the accuracy analysis, these standard measurements were compared with the measurements from the dental casts using two methods. The difference between them was defined as the measurement error. To investigate the cause of measurement error, an examination was made for the presence and degree of contact point deviation on each tooth from the upper and lower occlusograms, and the mesio-distal angulation of each tooth was measured with TARG. Following results were obtained through statistical analysis. 1. In the analysis for reproducibility; the measurements with vernier calipers showed significant differences in three out of twelve teeth while the computer measurements showed significant differences in one out of twelve teeth. 2. In the analysis for accuracy; compared with the standard measurements, the measurements with vernier calipers showed significant differences in three out of twelve teeth while the computer measurements showed significant differences in two out of twelve teeth. 3. Compared with the standard measurements, the measurements with vernier calipers were apt to be larger at the upper first molar, and smaller at the lower first molar The computer measurements, however, were apt to be larger at both upper and lower first molars. 4. The measurements with vernier calipers showed the largest error at the lower first molar and the degree of error was variable according to the tooth while the difference of error was small in the computer measurements. 5. In the analysis for the correlation of the degree of measurement errors with the contact point deviation index and the mesio-distal crown angulation of each tooth, the measurements with vernier calipers did not show significant correlation while the measurements with computer showed slight Positive correlations. The results of this study indicate that a computer system may be useful for the measurement of tooth size in the model analysis.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.742-749
• /
• 2009

The use of cone-beam computed tomography(CBCT) has been proposed for guiding the delivery of radiation therapy. A kilovoltage imaging system capable of radiography, fluoroscopy, and cone-beam computed tomography(CT) has been integrated with a medical linear accelerator. A standard clinical linear accelerator, operating in arc therapy mode, and an amorphous-silicon (a-Si) with an on-board electronic portal imager can be used to treat palliative patient and verify the patient's position prior to treatment. On-board CBCT images are used to generate patient geometric models to assist patient setup. The image data can also, potentially, be used for dose reconstruction in combination with the fluence maps from treatment plan. In this study, the accuracy of Hounsfield Units of CBCT images as well as the accuracy of dose calculations based on CBCT images of a phantom and compared the results with those of using CT simulator images. Phantom and patient studies were carried out to evaluate the achievable accuracy in using CBCT and CT stimulator for dose calculation. Relative electron density as a function of HU was obtained for both planning CT stimulator and CBCT using a Catphan-600 (The Phantom Laboratory, USA) calibration phantom. A clinical treatment planning system was employed for CT stimulator and CBCT based dose calculations and subsequent comparisons. The dosimetric consequence as the result of HU variation in CBCT was evaluated by comparing MU/cCy. The differences were about 2.7% (3-4MU/100cGy) in phantom and 2.5% (1-3MU/100cGy) in patients. The difference in HU values in Catphan was small. However, the magnitude of scatter and artifacts in CBCT images are affected by limitation of detector's FOV and patient's involuntary motions. CBCT images included scatters and artifacts due to In addition to guide the patient setup process, CBCT data acquired prior to the treatment be used to recalculate or verify the treatment plan based on the patient anatomy of the treatment area. And the CBCT has potential to become a very useful tool for on-line ART.)

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2011

Design and Implementation of Clipcast Service via Terrestrial DMB This paper outlines the system design and the implementation process of clipcast service that can send clips of video, mp3, text, images, etc. to terrestrial DMB terminals. To provide clipcast service in terrestrial DMB, a separate data channel needs to be allocated and this requires changes in the existing bandwidth allocation. Clipcast contents can be sent after midnight at around 3 to 4 AM, when terrestrial DMB viewship is low. If the video service bit rate is lowered to 352 Kbps and the TPEG service band is fully used, then 320 Kbps bit rate can be allocated to clipcast. To enable clipcast service, the terminals' DMB program must be executed, and this can be done through SMS and EPG. Clipcast service applies MOT protocol to transmit multimedia objects, and transmits twice in carousel format for stable transmission of files. Therefore, 72Mbyte data can be transmitted in one hour, which corresponds to about 20 minutes of full motion video service at 500Kbps data rate. When running the clip transmitted through terrestrial DMB data channel, information regarding the length of each clip is received through communication with the CMS(Content Management Server), then error-free files are displayed. The clips can be provided to the users as preview contents of the complete VOD contents. In order to use the complete content, the user needs to access the URL allocated for that specific content and download the content by completing a billing process. This paper suggests the design and implementation of terrestrial DMB system to provide clipcast service, which enables file download services as provided in MediaFLO, DVB-H, and the other mobile broadcasting systems. Unlike the other mobile broadcasting systems, the proposed system applies more reliable SMS method to activate the DMB terminals for highly stable clipcast service. This allows hybrid, i.e, both SMS and EPG activations of terminals for clipcast services.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.219-231
• /
• 1996

The aim here is to analyse the system of description of GIS in all of the high school textbooks passed with the official approval, to find the degree to which teachers understand about GIS, and to consider the present condition of GIS instruction. Most of the authors of textbooks generally underestimate importance of GIS, and there is difference among their awareness. In the system of description of GIS, there are only a few kinds of textbooks in which explanation of GIS is made coherently from the purpose of instruction aim through the chapter summary and to overall test in both of the Korean Geography and the World Geography. This trend is due to the degree of distribution of the GIS specialists in writing a textbook while the other texts books shows just a brief introduction of GIS concept. Although there is the limit for teachers to study how to teach GIS due to its very technological aspect as well as few previous training and teacher's guide. Thus it is evident that about a half of teachers who responded taught high school students without a knowledge on GIS, and a few of them even never referred to that concept. These facts may negatively affect the status of a geography in the society of information. For the solution of these issues, it is considered how to repair the description system and its contents. Besides, the variation among textbooks is reduced at the further revision of the 7th curriculum. And the printed matters of GIS are sufficiently provided for the teachers to use as their teaching aids. It is desirable that the GIS instruction models should be further developed for college education, and the programs for the on-the-job teachers training should be arranged. Besides, the previous training for the on-the-job teachers should be achieved more practically with enough time before the revision of curriculum.