• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2411-2417
• /
• 2012

Globally, the emergence of smart phones vitalized the ecosystem of mobile data service industry. Consequentially, mobile data traffic has been explosively growing and the speed of growth will be more steep. New spectrum will be required in order to properly accommodate the explosively growing mobile data traffic. However, it will be difficult to acquire a sufficient guard band between different frequency bands because the range of frequency which is suitable for wireless communications is limited. Thus, the performance degradation caused by inter-band interference will be one of challenging problems in the next generation mobile communication systems. In this paper, we analyze the performance degradation caused by inter-band interference by computer simulations in various environments. Our results show that the impact of the inter-band interference is more critical when own signal is poor or its own interference from neighboring cells is low.

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.187-193
• /
• 2006

In this paper, we study the coexistence of orthogonal frequency division multiplexing (OFDM)-based systems beyond 3G (B3G) and point-to-point (P-P) fixed service (FS) microwave systems. The advanced general analytical model derived via a power spectral density (PSD) analysis proposed in this paper has two advantages in comparison with the conventional minimum coupling loss (MCL) method. First, the interfering signal power that appears in the band of a victim system can be easily assessed without a spectrum emission mask. Second, when transmit power is not allocated to some subcarriers overlapping the band of the victim system in order to mitigate B3G OFDM-based systems interference with other systems, the general analytical model can successfully assess the interference from the B3G systems into FS systems, whereas the MCL method incorporating the spectrum emission mask cannot be applied in the presence of the same interference condition. The proposed model can be derived in a closed form and is simply implemented with the help of simulation, and thus the solution can be obtained in significantly reduced time. Through application of the proposed model, coexistence results are analyzed in a co-channel and adjacent channel with respect to guard band and minimum separation distance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.643-652
• /
• 2000

In this paper, we analyze the BER performance of OFDM/QPSK system in frequency selective Rayleigh fading channel with impulsive noise and improve its performance by adopting convolutional coding. When the channel delay time is shorter than the guard band, the OFDM/QPSK system shows a good BER performance while, when the channel delay time becomes longer than the guard band, its BER performance is abruptly degraded. Moreover, when the transmitted signal is contaminated by a strong impulsive noise in the channel, the BER performance falls to about $10^{-1}$. Also, without channel coding technique, the system doesn't meet even the voice service requirement while it meets the data service requirement with convolutional coding in frequency selective Rayleigh fading channel with impulsive noise.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1139-1144
• /
• 2019

A calibration system for diagnosing and confirming the performance of precision measuring instruments minimizes the risk of misjudgment of calibration resulted by complying with international standard requirements in order to ensure the reliability of calibration results. This paper uses a proposed calibration system suitability assessment and a guard-band technique through an analysis of uncertainty factors when it is impossible to acquire and operate high-performance equipment at a calibration laboratory, and proposes an optimized test limit output model substituting performance standards. The proposed method provides an optimized test standard to meet the quantitative evaluation criteria of the calibration system and the probability of false acceptance risk required by international standards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.423-434
• /
• 1989

In this paper, a PRS transmission system using TMRCP as the unit pulse is proposed, which solves the problems occur when the PRS method will be applied to the digital transmultiplexer for each channel. And a design technique which uses this PRS method for the FFT polyphase filter transmultiplexer concept is given. TMRCP-PRS signal require a bandwidth about 2.5KHz(including some guard-band) for a 4-KHz bandlimited voice channel. Therefore, in he 24 channel transmission line, it gives the same advantages as he ordinary PRS system and sloves the inter-channel interference problems. And its good speed-tolerance reduces the time-errors by the environments and the power loss, so it makes the system to be stable. The total system, however, attaces the filters for PCM-PRS, PRS-PCM conversion before and after the transmultiplexer respectively.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.673-681
• /
• 2013

Purpose: The purpose of this study is to investigate the design optimization modeling of screening procedures based on the assessment of misclassification errors. Methods: Misclassification errors due to measurement variability are derived for normally distributed quality characteristics. Further, an optimization model for ensuring the level of outgoing quality is proposed and demonstrated through an illustrative example. Results: It is shown that two types of misclassification errors (i.e., false acceptance and false rejection) may be properly compromised through an analytical assessment of measurement errors and an optimization modeling. It is also discussed that a variety of optimization modeling may be enabled based on the derivation of measurement errors. Conclusion: It may be concluded that the design of screening inspection may further be facilitated by including the effect of measurement errors on the performance of screening inspection procedure.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.338-341
• /
• 2013

본 논문에서는 동일 주파수 대역 내 DRM(Digital Radio Mondiale) Plus 신호와 FM(Frequeny Modulation) 신호가 모두 서비스 되는 Hybrid 방송 모드에 적합한 DRM Plus 신호 검출 기법을 제안한다. OFDM(Orthogonal Frequency Division Multiplexing) 신호의 Guard-Interval 상관 기법을 그대로 적용할 경우 DRM Plus 신호 검출 성능은 우수하나, FM 신호 수신 시 False Alarm 발생 확률이 증가하는 문제점이 발생한다. 제안한 방법은 Guard-Interval 상관 방법에 Reference 블록을 포함하고 있어, 약한 DRM Plus 신호에서도 판별 확률이 높고, 아날로그 FM 신호 수신 시 False Alarm이 발생할 확률이 낮은 특징이 있다. 모의 실험을 통하여 제안한 기법의 성능을 확인한다.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.216-219
• /
• 2003

In this paper, we present performance analysis of an IEEE P802.15.3a high rate wireless personal area network transceiver. This physical layer standard uses QOSK as its sub-channel modulation scheme and orthogonal frequency domain modulation (OFDM) for sub-bands. OFDM is used for each sub-band so that multi-path effects are absorbed by equalizer and guard, and fading can be approximately modeled as additive white Gaussian noise. In multi-band ultra-wideband system, DAC quantization error is important noise source since high resolution conversion cannot be used due to high power consumption. Simulation result shows that, to get 640-Mbps throughput, at least 5-bits precision is necessary to maintain bit-error rate under 10$\^$-2/, which can be lowered, with channel coding, to 10$\^$-6/ that is the bit-error rate required by IEEE 802.15 upper protocol layer, in 4-meter LOS fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1279-1288
• /
• 2004

In this paper, the DMR(Digital Microwave Radio) system-based OFDM(Orthogonal Frequency Division Multiplexing) scheme in microwave channel environments has been proposed and system performances have been evaluated. The existing single carrier DMR system has a complex system structure due to using high-level QAM(Quadrature Amplitude Modulation) modulation scheme and so charmel capacity is limited by sensitive effects from fading. Therefore, in the proposed DMR system, it uses that the OFDM scheme for enhancement of fading distortion and also uses that the band-limited pulse shaping filter instead of windowing for no additional data such as GI/GB and for using efficient of IFFT/FFT block. The performance of OFDM/QPSK-DMR system and single carrier DMR system are analysed by computer simulation using two-ray model under the microwave channel environments The computer simulation results confirm that the fade margin of the proposed OFDM/QPSK-DMR system is highly increased as the number of sub-carriers is larger.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.82-91
• /
• 2015

The purpose of this paper is to propose the frequency allocation plan for the terrestrial UHDTV in 700MHz frequency band. Currently 700MHz frequency band is being requested by broadcasting, communication, and public safety sites for the use of UHDTV, LTE/LTE-A and PPDR (Public Protection and Disaster Relief) by each site. Validity and proper timing of each request is examined by references, and the frequency allocation plan is proposed. As results 9 channels and guard bands are allocated for the UHDTV service, under the consideration of two 10MHz frequency bands of the PPDR in700MHz band.