• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.44-49
• /
• 1995

Abstract The surface of 6H - SiC bulk crystal grown by sublimation process was investigated by optical microscope observation. Since, in the 6H crystal growing, the crystal had the habitual step growth attitude such that the lateral growth rate along the random a - axis orientation was higher than that along the c - axis of the growth direction, then many steps were developed. There were, also, many micropipes on the surface in the form of as-like large voids. However, they were differenciated with pores and cross- sectional shape of them were close to the circle. In this study, many micropipes, planar defects and the growth steps appeared on the grown crystal surface were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.27-31
• /
• 2019

Large grain YBCO bulk superconductors are fabricated by the top-seeded melt growth (TSMG) or top-seeded infiltration growth (TSIG) method. Both growth methods use at least one of $YBa_2Cu_3O_{7-{\delta}}$, $Y_2BaCuO_5$, $BaCuO_3$ pre-reacted precursor powders. However, the synthesis of the pre-reacted powders includes multiple calcination runs which are cost-bearing and time-consuming. In this work, we report the successful growth of single-domain YBCO bulk superconductors directly by using the powder compact that has been pressed from the mixture of $Y_2O_3$, $BaCuO_3$ and CuO powders without any intermediate grinding step. Single-domain YBCO bulk superconductor has been also prepared by using $Y_2O_3$, $BaO_2$ and CuO powders without intermediate grinding step. Investigations on the trapped magnetic field and microstructure of the melt-processed specimen show that the elimination of the repeated processes of calcinations and pulverization has hardly affected on the crystal growth and the magnetic properties of the grown YBCO bulk superconductors. However, it is thought that the presence of residual carbon affects on the size of Y211 particles in melt-processed YBCO bulk superconductor.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1542-1545
• /
• 2002

Experimental works were performed to implement the hetero-epitaxial growth of diamond films on the (100)- and (111)-oriented Si substrates. The deposition process used to prepare diamond films consisted of a bias-enhanced nucleation(BEN) step, accompanied with a growth step using a microwave plasma CVD system. The highly oriented diamond films were deposited under the growth condition of relatively low methane concentrations and high temperatures. Material properties and surface morphologies of deposited diamond films were improved by the addition of carburization step into the deposition process.

• Journal of Smart Tourism
• /
• v.2 no.3
• /
• pp.5-15
• /
• 2022

As the utilization of technology in the tourism field becomes familiar, it greatly impacts people's tourism activities. These changes could also affect the behavior of tourists during the pandemic. To investigate consumers' adaptation to the self-service technology (SST) environment during the coronavirus disease of 2019 (COVID-19) pandemic, we adopted a model of absorptive capacity as the main framework for empirical research. To track the social effects of COVID-19, consumers' behavioral intentions for four different points in time are collected. The analysis was conducted using latent growth and structural equation modeling. We set the organizational and environmental characteristics as the first step of the model, with assimilation and trust as a middle step. Intention to use a kiosk is placed at the final step as an exploit. Findings indicate that organizational characteristics and environmental characteristics positively influenced assimilation and trust, except for environmental characteristics. Consumers' assimilation in SST encourages immediate intention to use a kiosk. Consumers' trust in kiosks positively impacts both immediate and continuance intention to use a kiosk during COVID-19.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.433-437
• /
• 2006

Recently, mathematical modeling for the activated sludge process is important to design and control of wastewater treatment plant. Nevertheless, there is a lack of information regarding the pathway of substrate utilization between external and internal substrates in biological nutrient removal (BNR). In this research, a new activated sludge model (step growth model) is proposed and compare with ASM No.3. This model structure is consist of five processes; aerobic storage, growth on external substrate and stored intercellular storage compounds (ISCs), endogenous respiration and aerobic respiration of ISCs. The predicted results by the step growth model were more good accordance with the results of oxygen utilization rate (OUR) and TCOD experiment than that of the ASM No.3.

• Toxicological Research
• /
• v.16 no.4
• /
• pp.317-323
• /
• 2000

The immunosuppressive effects of thirty nine chemicals chosen by their potential toxicity were evaluated using a three-step testing method. The immunotoxicity test method developed in this study consisted of three simple assays of lymphoproliferation, mixed leukocyte response, and interleukin (IL)-2 production. The first step was mitogen-induced proliferation assay. Ten chemicals showed the inhibitory effects on the mitogen (lipopolysaccharide or concanavalin A)-induced proliferation in dose-dependent manners. The second step was mixed lymphocyte response. This step crosschecked the growth-suppressive effects detected at the first step. All of 10 chemicals, which showed suppression of lymphoproliferation, also exhibited the suppressive effects on the mixed lymphocyte response in the similar range of chemical concentration. The third step was planned to determine whether or not this growth suppression was mediated through an early activation of T-cell, which could be represented with IL-2 production. Six out of 10 chemicals decreased the interleukin-2 production in the similar concentration range used in the step 1 and 2. These results suggest that those 6 chemicals might have their targets on the signal transduction path-way toward the IL-2 production. In the meantime the other 4 chemicals might have their targets after the IL-2 production signal. Taken all together, the three-step test would be simple, fast, and efficient to deter-mine whether or not the chemical has immunosuppressive effects.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.199-205
• /
• 2006

Patterned sapphire substrates (PSS) were fabricated by a simple wet etching process with $SiO_2$ stripe masks and a mixed solution of $H_2SO_4$ and $H_3PO_4$. GaN layers were epitaxially grown on the PSS under the optimized 2-step growth condition of metalorganic vapor deposition. During the 1st growth step, GaN layers with triangular cross sections were grown on the selected area of the surface of the PSS, and in the 2nd growth step, the GaN layers were laterally grown and coalesced with neighboring GaN layers. The density of threading dislocations on the surface of the coalesced GaN layer was $2{\sim}4\;{\times}\;10^7\;cm^{-2}$ over the entire region. The epitaxial structure of near-UV light emitting diode (LED) was grown over the GaN layers on the PSS. The internal quantum efficiency and the extraction efficiency of the LED structure grown on the PSS were remarkably increased when compared to the conventional LED structure grown on the flat sapphire substrate. The reduction in TD density and the decrease in the number of times of total internal reflections of the light flux are mainly attributed due to high level of scattering on the PSS.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.485-490
• /
• 2003

We have developed a new way of the constant growth technique to maintain a grating height of originally-etched V-groove of submicron gratings up to 1.5 $\mu\textrm{m}$ thickness by a low pressure metalorganic chemical vapor deposition. The constant growth technique is well performed on two kinds of submicron gratings that made by holography and electron (e)-beam lithography GaAs buffer layer grown on thermally deformed submicron gratings has an important role in recovering the deformed grating profile from sinusoidal to V-shaped by reducing mass transport effects. The thermal deformation effect on submicron gratings made by e-beam lithography is less than that on submicron gratings made by holography. The constant growth technique is an important step to realize complex optoelectronic devices such as one-step grown distributed feedback lasers and two-dimensional photonic crystals.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.401-407
• /
• 2009

This study intends to examine the influence of foliage treatment and seed treatment on the suppression of the succulent growth of tomato seedlings, and further, to clarify the proper way of suppressing the succulent growth of tomatoes. For the foliage treatment, the time and the concentration of diniconazol treatment were considered, and for the seed treatment, the soaking time was considered. As a result of examining the stem elongation of tomatoes based on the time and the concentration of diniconazol treatment, suppression of stem elongation and internodal length was found in step 1, 2, and 3. Plants absorb more quantity of a chemical when they are young, so a good chemical effect was found. In step 1, the number of suppressed nodes was 4, which was decreased to 3 in step 2 and to 2 in step 3. As a result of examining the influence of chemical tenacity on stem elongation, $5\;mg{\cdot}L^{-1}$ in step 1 and 2 showed the suppression of stem elongation after chemical treatment, but it became recovered fast after a particular time, compared with others. In step 3, the period of stem elongation suppression was short and they were recovered fast. In step 1, the effect of chemical tenacity was found for 5 weeks, but in step 2 and 3, it lasted for 4 weeks respectively. After raising seedlings was finished, they got planted and the quantity of living bodies increased fast so there was no significant difference in breeding from non-treatment.