• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.533-536
• /
• 2008

Hopum is a new japonica rice cultivar developed from the cross between Milyang165 and F1 crossing Milyang165 and Iksan438 at Department of Rice and Winter Cereal Crop, NICS, RDA, in 2006. This cultivar has a short grain shape and about 141 days growth duration from direct seeding to harvesting in the southern plain including Chungcheong province. This cultivar has short culm and spikelet number per panicle is similar to that of Nampyeongbyeo, while filled grain rate is lower than standard variety. This cultivar has medium size of brown rice and shows moderate resistance to leaf blast, to bacterial blight pathogens of $K_1$, $K_2$ and $K_3$ and stripe virus disease but susceptible to major virus diseases and insect pests. The milled kernel of Hopum is translucent with non-glutinous endosperm. Protein and amylose content of Hopum is about 6.5% and 18.7%, respectively. This cultivar has better palatability of cooked rice than Chucheongbyeo harvested in Gyeongki province. Its milling recovery (76.8%) and percentage of perfect-shaped milled rice (94.7%) were higher than Nampyeongbyeo. The milled rice yield of Hopum was 5.83 MT/ha (15% higher than Juan) under wet-direct seeding, 5.66 MT/ha (8% higher than Juan) under dry-direct seeding, and 6.00 MT/ha (8% higher than Nampyeong) under ordinary transplanting cultivation. "Hopum" would be adaptable for ordinary transplanting and direct seeding in the southern plain including Chungcheong province.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.159-201
• /
• 2019

Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2019

The health benefits associated with consumption of fresh produce have been clearly demonstrated and encouraged by international nutrition and health authorities. However, since fresh produce is usually minimally processed, increased consumption of fresh fruits and vegetables has also led to a simultaneous escalation of foodborne illness cases. According to the report by the World Health Organization (WHO), 1 in 10 people suffer from foodborne diseases and 420,000 die every year globally. In comparison to other processed foods, fresh produce can be easily contaminated by various routes at different points in the supply chain from farm to fork. This review is focused on the identification and characterization of possible sources of foodborne illnesses from chemical, biological, and physical hazards and the applicable methodologies to detect potential contaminants. Agro-chemicals (pesticides, fungicides and herbicides), natural toxins (mycotoxins and plant toxins), and heavy metals (mercury and cadmium) are the main sources of chemical hazards, which can be detected by several methods including chromatography and nano-techniques based on nanostructured materials such as noble metal nanoparticles (NMPs), quantum dots (QDs) and magnetic nanoparticles or nanotube. However, the diversity of chemical structures complicates the establishment of one standard method to differentiate the variety of chemical compounds. In addition, fresh fruits and vegetables contain high nutrient contents and moisture, which promote the growth of unwanted microorganisms including bacterial pathogens (Salmonella, E. coli O157: H7, Shigella, Listeria monocytogenes, and Bacillus cereus) and non-bacterial pathogens (norovirus and parasites). In order to detect specific pathogens in fresh produce, methods based on molecular biology such as PCR and immunology are commonly used. Finally, physical hazards including contamination by glass, metal, and gravel in food can cause serious injuries to customers. In order to decrease physical hazards, vision systems such as X-ray inspection have been adopted to detect physical contaminants in food, while exceptional handling skills by food production employees are required to prevent additional contamination.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.169-197
• /
• 2018

The purpose of this study is to present a reasonable and concrete standard for the Korean aviation insurance compulsory subscription system. Through this, we aim to improve the current revision of laws and regulations, and ultimately create an environment in which the safety and property of the Korean people who use aircraft with appropriate aviation insurance can be secured. In particular, by reviewing the aviation business law and its new laws and regulations enacted in 2017, the legislative improvement direction of aviation insurance will be proposed. In order to maintain the continuous growth of the air transportation industry and to make amicable compensation for the victims, considering the characteristics of the total accident, instantness, and giganticness of air accidents in which a lot of people and property are lost in the event of an accident, adequate insurance coverage is essential. In this respect, the compulsory insurance to amend the principle of freedom of contract, which is the great principle of the modern judicial system, will be persuasive. However, in comparison with foreign legislation, the legal provisions on Korea's obligation to comply with aviation insurance need to be revised around the following issues: First, it is reasonable to enforce the regulation of the mandatory aviation insurance by legislation from the Congress not by administrative regulations. Because it will force the monetary obligations of the individual such as common air carriers. Second, our law regulations respond to various kinds of air damages by using the phrase "limit of liability stipulated in international conventions". However, as we have seen in the text, the range of compensation are various according to the use of legal instruments in international conventions such as the Montreal Convention, which governs the compensation of passengers for damages to passengers today. Third, in countries with narrow territories, such as Korea, there are big differences in flying time and insurable risk between domestic and international transportation. Therefore, it is necessary to divide domestic transportation and international transportation even in the obligation to join the insurance. This dual discipline has the advantage for rookies in air carrier market who mainly start their business from domestic service. Fourth, according to Korean law, the regulations of automobile loss insurance is applicable to the aviation mandatory insurance of unmanned aerial vehicle accident which is lack of persuasion. In the future, it will be appropriate to discipline insurance for unmanned aerial vehicles with unlimited potential for development from a long-term perspective.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.39-48
• /
• 2019

Based on the bidding data of the national marketplace for public procurement service from 2003 to 2015, this study investigated and analyzed the bidding trends of the landscape management public consignment service by analyzing total bidding, type, client, region, license. The results are as follows. First, the total number of bids for civilian consignment services in landscape management increased by 1,112 cases, corresponding to a 487.7% increase over 10 years, and the total bidding amount increased by 144,504 million won, corresponding to a 382.5% increase. Second, in 10 years, the proportion of landscape management in landscaping works increased by 10%, and the bidding amount increased by 3%. Third, in the analysis of bidding trends by type, green areas showed the greatest growth in the number of bids, while the greenery of buildings showed the highest increase in the bid amount. Fourth, local autonomous entities, Gyeonggi province, and the landscaping planting construction industry showed the highest increase in the number of bids and the amount in each field such as client, region, and license. In summary, the number of cases and the bidding amount is increasing year by year. Considering the increasing number of users and demands thereof, the number of bids and the amount of consignment service for landscape management will continue to increase. The purpose of this study is to investigate and systematically analyze the tendency of bidding for 10 years for the private consignment service of landscape management in the current situation, where the importance of landscape management is increasingly emphasized. Another purpose of this study is to discern the necessity of the landscape management business and to provide the basis for incorporating the landscape management business into the professional construction industry in the future, thus providing opportunities for widening the expertise and diversity of the landscaping field. For the following study, the legal basis of landscape management, qualification, equipment standards, calculation of management cost per unit, and the appropriateness of the management cost should be considered.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.144-152
• /
• 2021

Based on the analysis of the current state of the world's foundry industry, we looked at the international competitiveness of Korea's foundry industry for the past 20 years. Korea's total foundry production is 2.52 million tons, and the production per company (so-called productivity) is 2,831 tons, which is the eighth largest in the world and down one position for the case of total foundry production, while productivity remains its position compared to three years ago. Korea is the only one of the top 10 foundry to see a decline in production. Similar to the global situation, Korean products consist of 38% of grey csat iron, 31% of ductile cast iron, 15% of aluminum, and 9% of cast steel. In order to obtain statistics on Korea's foundry industry, the survey conducted a service project for approximately nine months from April 2020. Various statistical surveys and sample in-depth surveys by the Korean standard industry class were evaluated for various contents of the domestic casting industry. We also looked at the number of companies, the distribution by region, the number of workers and the percentage of foreigners, and the distribution of each job, as well as the R&D investment status according to the size of the enterprise. Together, sales, exports, sales and various profit ratios were analyzed to measure the earning power of foundry industry. In addition, the classification by grouping the foundry industry according to the process utilized by focusing on each company, and to determine the sales, exports, and yield status for each process was also investigated on the basis. Based on these data, the domestic foundry industry has presented a variety of offers for the following issues for sustainable growth; global ranking, marginal corporate restructuring, training of domestic technical people, differentiated support policies by company size and process.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.311-318
• /
• 2022

We conducted this study to derive the site index, which is a criterion for the planting of Robinia pseudoacacia, a honey plant, and to investigate the diameter distribution change by derived site index. We applied the Chapman-Richards equation model to estimate the site index of the Robinia pseudoacacia stand. The site index was distributed within the range of 16-22 when the base age was 30 years. The fitness index of the site index estimation model was low, but we judged that there was no problem in the application because the residual distribution of the equation had not shifted to one side. We used the Weibull diameter distribution function to determine the diameter distribution of the Robinia pseudoacacia stand by site index. We used the mean diameter and the dominant tree height as independent variables to present the diameter distribution, and our analysis procedure was to estimate and recover the parameters of the Weibull diameter distribution function. We used the mean diameter and the dominant tree height of the Robinia pseudoacacia stand to show distribution by diameter class, and the fitness index for dbh distribution estimation was about 80.5%. As a result of schematizing the diameter distribution by site indices as a 30-year-old, we found that the higher the site index, the more the curve of the diameter distribution moved to the right. This suggests that if the plantation were to be established in a high site index stand, considering the suitable trees on the site, the growth of Robinia pseudoacacia woul d become active, and not onl y the production of wood but al so the production of honey would increase. We therefore anticipate that the site index classification table and curve of this Robinia pseudoacacia stand will become the standard for decision making in the plantation and management of this tree.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.21 no.1
• /
• pp.7-14
• /
• 2021

Purpose: Pseudohypoparathyroidism (PHP) is caused by genetic and epigenetic alteration in the GNAS locus, and characterized by the resistance to multiple hormones and the Albright's hereditary osteodystrophy (AHO) phenotype. This study investigated the phenotypic characteristics and molecular features of PHP. Methods: Eight patients who diagnosed as PHP were enrolled at Pusan National University Children's hospital and clinical features, biochemical and genetic findings were retrospectively reviewed. Results: Of a total of 8 patients, 5 were diagnosed with PHP1a, and 3 were diagnosed with PHP1b. Patients with PHP1a had three different mutations in the GNAS gene, and patients with PHPIb had imprinting defect in differentially methylated regions (DMRs) of the GNAS locus. Two novel GNAS variants were identified in patients with PHP1a, including c.313-2A>T and c.1094G>A. All patients with PHP1a displayed AHO features; short stature (80%), brachydactyly (80%), a round face (80%), obesity (40%), heterotopic ossification (60%), and intellectual disability (60%), whereas only one patient (33.3%) with PHP1b showed AHO feature such as a round face. When phenotypic features between PHP1a and PHP1b patients were compared, patients with PHP1b showed a tendency of higher current height standard deviation scores (SDS) compared to patients with PHP1a, (-3.2±2.1 vs.-1.1±0.8; P=0.06) Conclusions: This study summarizes the phenotypic and genetic features of the PHP patients. Although we found considerable clinical overlap between PHP1a and PHP1b, further long-term follow-up is needed to evaluate the growth and development of children with PHP, as well as the effects of end-organ resistances to endocrine hormones.

• Journal of Life Science
• /
• v.33 no.10
• /
• pp.808-819
• /
• 2023

This study was conducted to develop a selection marker for the identification of the Bacillus licheniformis K12 strain in microbial communities. The strain not only demonstrates good growth at moderate temperatures but also contains enzymes that catalyze the decomposition of various polymer materials, such as proteases, amylases, cellulases, lipases, and xylanases. To identify molecular markers appropriate for use in a microbial community, a search was conducted to identify variable gene regions that show considerable genetic mutations, such as recombinase, integration, and transposase sites, as well as phase-related genes. As a result, five areas were identified that have potential as selection markers. The candidate markers were two recombinase sites (BLK1 and BLK2), two integration sites (BLK3 and BLK4), and one phase-related site (BLK5). A PCR analysis performed with different Bacillus species (e.g., B. licheniformis, Bacillus velezensis, Bacillus subtilis, and Bacillus cereus) confirmed that PCR products appeared at specific locations in B. licheniformis: BLK1 in recombinase, BLK2 in recombinase family protein, and BLK3 and BLK4 as site-specific integrations. In addition, BLK1 and BLK3 were identified as good candidate markers via a PCR analysis performed on subspecies of standard B. licheniformis strains. Therefore, the findings suggest that BLK1 can be used as a selection marker for B. licheniformis species and subspecies in the microbiome.

• Korean Journal of Culture and Social Issue
• /
• v.8 no.1
• /
• pp.103-139
• /
• 2002

Korean society has significantly changed with the onset of a dramatic economic crisis in 1998. From 2000, however, the Korean economy has recovered and currently Korea is enjoying a similar standard of living and economic growth as the pre-1998 levels. This study is a follow-up analysis, comparing the results examining the success attribution of Korean students and adults in 2001 with the results obtained before the economic crisis in 1997. Using the indigenous psychological approach, this study compares the similarities and differences in Korean students and adults' attribution of their personal success before and after the economic crisis. A total of 988 participants, consisting of 481 primary, junior high, senior high and university students and 507 adults (236 fathers and 271 mothers of the students) completed the questionnaire developed by Kim and Park (1998). The results indicate that students perceived their academic achievement and adults perceived successful family life as their most proud achievement. Successful family life included items such as academic success of children, healthy development of their children, and harmonious family life. The person who provided the most significant support for students were parents and for adults, it was their spouse. For students, the importance of friends' social support increased during the high school years. In terms of type of social support, emotional support was reported to be the most important for both students and adults. As for the reason for their success, majority of students and men reported self-regulation and for women, supportive family environment was reported as being the most important. Comparing 2001 results with the 1997 results, the importance of family increased after the economic crisis. Even with the dramatic economic crisis, however, some of the underlying pattern remain strong (such as importance of academic achievement for students, family life for adults, the importance of social support, especially emotional social support from family members, and believing that self-regulation would lead to success). The similar pattern of results obtain before and after the economic crisis indicate that the above results reflect a fundamental values and belief system deeply imbedded in Korean mentality.