• 품질경영학회지
• /
• 제23권2호
• /
• pp.53-67
• /
• 1995

The problem considered here is to find the optimal discriminant analysis method in growth curve model. It has been studied how to find correct prior probability for the effective classification in discriminant analysis. We use the balanced condition to calculate prior probability. From the informative simulation study, new classification rule for the growth curve model is suggested. The suggested classification rule has better classification result than the other previously suggested method in terms of error rate criterion.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.133-141
• /
• 2002

This paper describes a versatile finite element technique which has been used to investigate wide range of structural defects of practical importance. The procedure automatically remeshes the three-dimensional finite element model during the stages of crack growth. Problems include the surface cracks in leak-before-break situations, the shape development of multiple surface defects.

• ETRI Journal
• /
• 제31권2호
• /
• pp.240-242
• /
• 2009

A computationally efficient implementation of the progressive edge-growth algorithm is presented. This implementation uses an array of red-black (RB) trees to manage the layered structure of check nodes and adopts a new strategy to expand the Tanner graph. The complexity analysis and the simulation results show that the proposed approach reduces the computational effort effectively. In constructing a low-density parity check code with a length of $10^4$, the RB-tree-array-based implementation takes no more 10% of the time required by the original method.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.57-65
• /
• 2000

The stress corrosion crack growth is simulated assuming a small axial surface crack inside a S/G tube. Internal pressure and residual stresses are considered as applied forces. Stress intensity factors along crack front, variation of crack shape and crack growth rate are obtained and discussed. It is noted that the aspect ratio of the crack is not depend on the initial crack shape but depend on the residual stress distribution.

• 한국농림기상학회지
• /
• 제15권4호
• /
• pp.282-290
• /
• 2013

대기와 지표면을 구성하고 있는 토양 및 식생은 생물리학적/생지화학적인 과정을 통해 서로 상호작용을 한다. 이러한 과정을 모의하기 위해 지표모델과 작물 생육모델이 사용되고 있다. 지표모델인 Noah MP 모델과 작물생육모델인 CERES-Rice 모델을 비교하기 위해 해남 플럭스 관측소 인근 지역에서 작물의 생육과 증발산량을 모의하였다. 플럭스 관측자료가 수집된 2003년부터 2012년까지 해남 플럭스 관측소의 주요 식생인 벼를 대상으로 생육과 증발산량을 모의되었다. Noah MP 모델은 단순한 식생 모의 과정으로 인해 개화기를 전후로 하는 벼의 LAI 변화양상을 정확하게 반영하지 못하였다. 벼의 생체중 예측에 있어서도 실제 관측될 수 있는 생체중보다 대략 10분의 1 수준에 해당하는 생체중이 모의되었다. 증발산량 모의의 경우에도, CERES-Rice 모델의 모의값보다 약 21%에 해당하는 증발산량을 모의하였다. 반면, CERES-Rice 모델의 경우 LAI의 변화와 생체중 모의 값은 실제의 벼 생육 양상과 유사할 것으로 추정되었다. 또한, 증발산량의 경우에도 해남 플럭스 관측소에서 측정된 값과 비교하였을 때 Noah-MP모델의 모의값이 CERES-Rice 모델의 모의값에 비해 RMSE 값이 1.8배 높았다. Noah MP 모델이 보이는 높은 오차값들은 Noah MP모델이 논의 지표상태를 적절히 반영하지 못하였기 때문으로 사료되었고, 특히 과소추정된 생체중을 보정하여 증발산량을 예측할 경우 오차를 30%까지 줄일 수 있을 것으로 보인다. 따라서, Noah MP 모델에 논에서의 지표 특성을 반영할 수 있다면 보다 정확한 물질순환과 에너지 교환을 예측할 수 있을 것으로 사료된다.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.66-75
• /
• 2022

The manufacturing industry is the foundation that drives economic growth, and manufacturing innovation is essential for sustainable growth advantage and the transition into a digital economy. Therefore, major countries actively support the field of simulations, which incorporate information and communication technologies into manufacturing, and announce various policies at the national level along with increasing investment. Simulation technology virtualizes product development processes to replace physical production and experimentation of products, dramatically reducing time and costs. In South Korea, the Korea Institute of Science and Technology Information (KISTI) has supported manufacturing companies for about 14 years by providing relevant technologies. This study uses the input-output table for the Bank of Korea to analyze the economic ripple effect. First, we identified the domestic industrial sector dealing with the supercomputing-based simulation industry. Then we analyzed its ripple effects by dividing them into the production inducement effect, value-added inducement effect, employment inducement effect, and forward/backward linkage effect. Consequently, when the supercomputing simulation budget of KISTI (28.3 billion won, 2007-2020) was set as an input coefficient, the analysis showed 45.1 billion won as the production inducement effect, 24.7 billion won as the value-added inducement effect, and 282 individuals per 1 billion won as the employment inducement effect. This study is significant in that it derived the effects of the inputs by analyzing the economic ripple effects of the projects of KISTI, which have been supporting South Korean manufacturing companies for the past 14 years with supercomputing-based simulations.

• 한국세라믹학회지
• /
• 제53권3호
• /
• pp.288-294
• /
• 2016

The densification process during liquid-phase sintering was simulated by Monte Carlo simulation. The Potts model, which had been applied to coarsening during liquid-phase sintering, was modified to include vapor particles. The results of two- and threedimensional simulations showed a temporal decrease in porosity, in other words, densification, and an increase in the average size of pores. The results also showed growth of solid grains and the effect of wetting angle on microstructure.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.1047-1051
• /
• 2005

Many corporation invest in LCD industry because of The growth of it. Back Light Unit(BLU), LCDs' main part take 20% of its product costs. In this paper we proposed simulation model that is in the process of introducing an equipment, We try to apply a simulation model in the BLU Assembly line by using ARENA. We make BLU Assembly line with various part storage, product strorage. etc. We evaluate Logistics in Assembly Line, and forecast bottleneck and throughput

• 한국화재소방학회논문지
• /
• 제8권1호
• /
• pp.26-33
• /
• 1994

The review of field model for fire simulation is presented. The approach to predict ire growth by solving the conservation equations over time and 2- or 3-dimentional space with appropriate boundary conditions is called field model. The finite difference method is adopted to solve the governing equations. The results is give qualititively and quantitatively good results but complicate and difficult to handle. But it is useful tool to understand detail phenomenons and to make decision for fire safety.

• 한국시뮬레이션학회논문지
• /
• 제10권3호
• /
• pp.31-46
• /
• 2001

Repeated measurements on units under different conditions are common in biological and biomedical studies. In a number of growth and pharmacokinetic studies, the relationship between the response and the covariates is assumed to be nonlinear in some unknown parameters and the form remains the same for all units. Nonlinear random coefficient models are used to analyze such repeated measurement data. Extended least squares methods are proposed in the literature for estimating the parameters of the model. However, neither objective function has closed form expression in practice. This paper proposes Monte Carlo methods to estimate the objective functions and the corresponding estimators. A simulation study that compare various methods is included.