• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.254-256
• /
• 2015

Effect of growth temperature ($T_g$) on the structural and optical properties of $In_{0.5}Ga_{0.5}As$ atomic layer epitaxial (ALE) quantum dots (QDs) is investigated in the range of $T_g=480-510^{\circ}C$. $In_{0.5}Ga_{0.5}As$ ALE QDs consist of 5 periods of short-period superlattices (SPSs) of 1 monolayer-thick InAs and GaAs. Number of coalescent QDs decreases as $T_g$ increases, and they disappear at $T_g=510^{\circ}C$. As $T_g$ increases in the range of $480-495^{\circ}C$, sizes of QDs increase, and densities of QDs decrease due to merge of QDs. On the contrary, although sizes of QDs are maintained at $T_g=495-510^{\circ}C$, densities of QDs decrease. This is attributed to the desorption of material-mainly indium-during the growth interruption. This conjecture is supported by the optical properties of the QDs as a function of $T_g$. As a result, we propose that optimum growth temperature of the QD is $495^{\circ}C$ with less repetition of SPSs than 5.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.703-709
• /
• 2013

Among many microalgae cultivation types, heterotrophic culture with low cost carbon sources and energy saving culture method is crucial. A result of estimating the effects of pH on wastewater treatment using heterotrophic growing microalgae Chlorella sorokiniana shows that there was no difference in microalgae growth amount and nitrogen, phosphorus removal rate by wide range of pH(5 ~ 9). From pH 5 to 9, total nitrogen, phosphorous and glucose removal rates were 10.5 mg-N/L/d, 2 mg-P/L/d, 800 ~ 1000 mg/L respectively. This study reveals that C. sorokiniana cannot metabolite glycerol heterotrophically, however, glucose and acetate were proper carbon sources for growth and T-N, T-P and TOC removal. This research highlights the potential of heterotrophic microalgal growth with wastewater treatment plant with wide range of pH and carbon sources.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.87-95
• /
• 1989

The fatigue crack propagation of random short fiber SMC composite material was investigated. In macroscopic viewpoint, SMC composite material was treated as isotropic material and was analyzed in terms of conventional fracture mechanics. Experiments were conducted on mode I and mixed respectively and various loading level was applied to each mode. Fatigue crack growth can be explained in three steps and most of fatigue life is consumed in initial crack growth. In this experiments, power law, i.e, da/dN=C(C.DELTA.K)$^{m}$ , between fatigue crack growth rate and stress intensity factor range, was valid and the value of the exponent m is about 10, which is much higher than that of other metals. Fracture mechanism was also investigated by SEM fractographic study.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.571-577
• /
• 1998

Variability in virulence of Calonectria ilicicola isolates form different hosts and geographic origin provides important information for breeding cultivars resistant to red crown rot. A wide range in virulence for 25 isolates of C. ilicicola from soybean and peanut was observed on six soybean cultivars. Soybean isolates were pathogenic on soybean although some were less virulent. Virulence of isolates was not affected greatly by cultivar and relatively consistent regardless of virulence level. Soybean isolates were more virulent on soybean than were peanut isolates. When virulence of two soybean and tow peanut isolates was compared between laboratory and greenhouse tests, it was stable across a range of cultivars. Mycelial growth of isolates from either soybean or peanut was reduced significantly on potato dextrose chlorate showed significant reduction of fungal growth than isolates from peanut did although their growth on potato dextrose agar was not significantly different. Evidence for physiologic specialization was not recognized in this system. However, the findings that soybean isolates of C. ilicicola were more virulent on soybean and reduction of fungal growth on potato dextrose chlorate than were peanut isolates suggest that host specialization may exist in this fugus.

• Fisheries and Aquatic Sciences
• /
• v.26 no.9
• /
• pp.525-534
• /
• 2023

Vitamin C plays an important role for fish survival, growth and disease resistance. However, the optimal vitamin C for rearing red drum Sciaenops ocellatus juveniles in Vietnam is not known. To address this issue, a 70-day feeding trial was conducted to evaluate the optimal dietary vitamin C requirements for red drum juveniles. Seven isonitrogenous (55.35% protein) and isolipidic (9.07% lipid) diets were formulated to include graded vitamin C concentrations of 23.2, 124.5, 235.2, 423.8, 626.7, 824.6, and 1,027.3 mg/kg, respectively. The results showed that fish fed on 423.8 mg/kg vitamin C diet had the highest growth rate, which can be linked to the increased feed utilization. Broken-line analysis indicated that the optimal dietary vitamin C requirements of red drum juveniles were 342.92 and 405.80 mg/kg for growth parameters, feed utilization, body composition and biochemical parameters of serum. Based on these parameters the optimal vitamin C supplementation level for red drum juveniles was estimated in the range of 342.92-405.80 mg/kg vitamin C in the diets with direct applications in producing artificial feed for rearing juveniles of this species in Vietnam.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.155-160
• /
• 2002

Metal matrix composites had generated a lot of interest in recent times because of significant in specific properties. It was also highlighted as the materials of frontier industry because strength, heat-resistant, corrosion-resistant, wear-resistant were superiored. In this study the strength properties of $Al_{18}B_4O_{33}/AC4CH$ were represented mixing the binder of $Al_2O_3$ and $TiO_2$. It was also fabricated by squeeze casting. $Al_{18}B_4O_{33}/AC4CH$ was fabricated at the melt temperature of $760^{\circ}C$ the perform temperature of $700^{\circ}C$ and mold temperature of $200^{\circ}C$ under the pressure of 83.4MPa and observed SEM. Fatigue crack growth rate tests on compact tension specimen(half-size) of thickness 12.5mm were conducted by using sinusoidal waveform. Compact tension specimens(half-size) were used and fatigue crack growth rate da/dN and stress intensity factor range ${\Delta}K$ were analyzed concerning to the R value of 0.1 and 0.05. In order to find out the value of ${\Delta}K$, load amplitude constant method was applied by the standard fatigue testing method describes in ASTM E647-95a. As the results of this study, Fatigue crack growth rate increased with in creasing the load ratio, Consequently, At equivalent stress intensity factors, the fatigue crack growth rates in MMC were faster than those of AC4CH alloy. then the fatigue life and the fatigue crack growth rate was investigated using scanning election microscopy(SEM)

• Journal of Interdisciplinary Genomics
• /
• v.4 no.2
• /
• pp.35-38
• /
• 2022

Background: Prader-Willi syndrome (PWS) is a complex genetic disease associated with growth impairment, severe obesity and metabolic dysfunctions. High proportion of PWS patients are born small for gestational age (SGA) than normal children, which also increase the risk of growth impairment and metabolic dysfunction in PWS. We aimed to compare growth outcome and metabolic profiles between SGA and appropriate for gestational age (AGA) PWS patients. Methods: Data of 55 PWS children and adults aged more than 2 years old (32 male and 23 female, age 2-18.8 years) from single center were studied. Only patients who were treated with GH were included. The clinical characteristics and laboratory findings were reviewed retrospectively. Results: Among 55 subjects, 39 had 15q11-13 deletion and 16 had uniparental disomy (UPD). Twenty (36.3%) were born SGA. All patients received GH treatment, and 11 (20%) discontinued GH treatment. Mean age at GH treatment initiation was 2.5 (range 0.3-12.4) years, and mean duration of treatment was 6.3 (range 1.0-11.3) years. Current height-SDS (-0.36 vs -0.16) and BMI-SDS (1.44 vs 1.33) did not differ between AGA and SGA group. Two patients in SGA group, but none in AGA group had diabetes mellitus. Mean glucose level was also higher in SGA group (100.1 vs 114.4 mg/dL). Conclusion: Our report gives an overview of growth profile and metabolic dysfunctions recorded in GH treated PWS patients. Growth profile did not differ between AGA and SGA group. Glucose level was higher in SGA group, so more careful monitoring and prevention for DM will be required in SGA group.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.98-111
• /
• 1995

High temperature low cycle fatigue shows that cycle-dependent crack growth owing to cyclic plastic deformation occurred simultaneosly with time-dependent crack growth owing to intergranular deformation. Consequently, to estimate crack growth rate uniquely, many to investigators have proposed various kinds of parameters and theories but these could not produce satisfactory results. Therefore the goal of this study is focused on prediction of crack growth rate using predominant damage rule, linear cumulative damage rule and transitional parameter ${\Delta}J_c/{\Delta}J_f$. On the basis of these sinusoidal loading waveform at 600$^{\circ}C$ and 700$^{\circ}C$.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.112-122
• /
• 1995

In this work, prediction of fatigue life and fatigue crack growth are studied. 4th order polynominal function is presented to describe the crack growth behaviors from artifical pit of SM45C steel. Crack growth curves obtained from 4th order polyminal growth equations are in good agreement with experimental data The crack growth behaviors at arbitrary stress levels and investigated by the concept of elastic-plastic fracture mechanics using ${\Delta}J$. Fatigue life prediction are carried out by numerical integral method. Prediction lives obtained by proposed method in this study, is in good agreement with the experimental ones. Life prediction results calculated by using of ${\Delta}J$ better than those of ${\Delta}K$.

• Toxicological Research
• /
• v.11 no.2
• /
• pp.175-180
• /
• 1995

We found that bufalln, one of the prominent components of the bufadlenolides in the Chinese medicine chan'su, has the potent inhibitory effects on growth and proliferation of the cultured bovine aortlc endothelial (BAE) and human umbilical vein endothelial (HUVE) cells. All naturally-occuring bufadienolides used in this study inhibited the cell growth in a dose-dependent manner. Particularly, bufalin among the bufadienolides showed the strongest inhibitory activity for the cell growth. The order of growth inhibition by bufadienolides on BAE cells was as follows: bufalin > gamabufotalln > bufotalln > cinobufagin > cinobufotalin > resibufogenin. The $IC_50$ values (50% inhibition of cell growth) of bufalin as determined by XTT assay were the range of 1-10 nM in BAE and HUVE cells. Bufalin exhibited a higher sensitivity towards cultured bovine aortic endothelial cells than human umbilical vein endothelial cells.