• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.375-381
• /
• 2011

본 연구의 주목적은 마그네슘합금의 피로균열성장거동을 지배하는 파라미터들의 확률론적 특성을 규명하는 것이다. 피로균열전파실험은 AZ31 마그네슘합금의 CT 시편을 이용하여 통계적으로 수행하였으며, 시편두께, 하중비, 최대하중 등의 여러 가지 실험조건으로 실온에서 진행하였다. 이 실험을 통하여 획득한 통계적 피로 데이터를 이용하여 피로거동 파라미터의 확률적 변동성 해석과 함께 확률분포 적합성을 고찰하였다. 균열성장속도계수는 확률적으로 매우 큰 변동성을 나타내는 파라미터로 밝혀졌으며, 반면에 균열성장속도지수는 매우 작은 변동성을 나타냄으로써 재료상수로 볼 수 있을 것이다. 피로거동 파라미터인 균열성장속도계수와 균열성장속도지수에 가장 적합한 확률분포는 3-파라미터 Weibull 분포이며, 2-파라미터 Weibull 분포는 균열성장속도계수의 경우에만 양호한 적합성을 나타낸다는 것을 규명하였다.

• Mycobiology
• /
• 제41권1호
• /
• pp.47-55
• /
• 2013

Rhizoctonia solani, Fusarium solani, F. oxysporum, and Macrophomina phaseolina were found to be associated with root rott and wilt symptoms of faba bean plants collected from different fieldes in New Valley governorate, Egypt. All the obtained isolates were able to attack faba bean plants (cv. Giza 40) causing damping-off and root rot/wilt diseases. R. solani isolates 2 and 5, F. solani isolate 8, F. oxysporum isolate 12 and M. phaseolina isolate 14 were the more virulent ones in the pathogenicity tests. Biocontrol agents (Trichoderma viride and Bacillus megaterium) and chemical inducers (salicylic acid [SA] and hydrogen peroxide) individually or in combination were examined for biological control of damping-off and root rot/wilt and growth promoting of faba bean plants in vitro and in vivo. Both antagonistic biocontrol agents and chemical inducers either individually or in combination inhibited growth of the tested pathogenic fungi. Biocontrol agents combined with chemical inducers recorded the highest inhibited growth especially in case SA + T. viride and SA + B. megaterium. Under green house and field conditions, all treatments significantly reduced damping-off and root rot/wilt severity and increased of survival plants. Also, these treatments increased fresh and weights of the survival plants in pots compared with control. The combination between biocontrol agents and chemical inducers were more effective than used of them individually and SA + T. viride was the best treatment in this respect. Also, under field conditions, all these treatments significantly increased growth parameters (plant height and number of branches per plant) and yield components (number of pods per plant and number of seeds per plant, weight of 100 seeds and total yield per feddan) and protein content in both seasons (2010~2011 and 2011~2012). Faba bean seeds soaked in SA + T. viride and SA + B. megaterium were recorded the highest growth parameters and yield components. Generally, the combination between biocontrol agents and chemical inducers recorded the best results for controlling damping-off and root rot/wilt diseases in greenhouse and field with addition improved plant growth and increased yield components in field.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.136-142
• /
• 2014

Recently a new version of PRO-LOCA program was released. Using the program, failure probability of pipes can be evaluated considering fatigue and/or stress corrosion crack growth and the effects of various parameters on the integrity of pipes in nuclear power plants can be evaluated quantitatively. The analysis results can be used to establish an inspection plan and to examine the effects of important parameters in a maintenance plan. In this study, sensitivity analyses were performed using the program for several important parameters including sampling method, initial crack size, number of initial fabrication flaws, operation temperature, inspection interval, operation temperature and nominal applied bending stress. The effect of parameters on the leak and rupture probability of pipes was evaluated due to fatigue or stress corrosion crack growth.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권2호
• /
• pp.69-74
• /
• 2010

Feeding is an important aspect of insect nutrition which in turn supports growth, development, reproduction and survival. The impact of quantitative feeding on nutritional parameters of fifth instar Antheraea mylitta larvae was studied by providing fresh leaves of Terminalia tomentosa for 1 to 4 times a day. All the parameters improved upon providing fresh diets more times over the single diet (1FD). The absolute body weight increased with increase in number of feeds/day significantly (P<0.001). While the maximum weight recorded was 29.61 g in 1FD, the respective weights for two feeds/day (2FD), three feeds/day (3FD) and four feeds/day (4FD) were 39.41 g, 40.63 g and 42.66 g respectively. Feeding period and instar duration were declined (P<0.001) and survival increased significantly (P<0.001) upon increase in the number of diets. Nutritional indices like ingestion, digestion, relative consumption rate (RCR), relative growth rate (RGR) and gain in body weight increased significantly with the increase in number of feeds/day, but approximate digestibility (AD) and efficiency of conversion of ingested food (ECI) declined, while efficiency of conversion of digested food (ECD) did not change.

• Fisheries and Aquatic Sciences
• /
• 제20권11호
• /
• pp.30.1-30.10
• /
• 2017

Small-scale fish farmers in developing countries are faced with challenges owing to their limited information on aquaculture management. Nile tilapia farmers in Teso North Sub-County recorded lower yields than expected in 2009 despite having been provided with required inputs. Water quality was suspected to be the key factor responsible for the low yields. This study sought to assess the effects of earthen pond water physico-chemical parameters on the growth of Nile tilapia in six earthen fish ponds under semi-intensive culture system in Teso North Sub-County. The study was longitudinal in nature with pond water and fish being the units of analysis. Systematic sampling was used to select five ponds while a control pond was purposively selected based on its previously high harvest. Four ponds were fed by surface flow and two by underground water. Each pond was fertilized and stocked with 900 fry of averagely 1.4 g and 4.4 cm. Physico-chemical parameters were measured in-situ using a multi-parameter probe. Sixty fish samples were randomly obtained from each pond fortnightly for four months using a 10 mm mesh size and measured, weighed and returned into the pond. Mean range of physico-chemical parameters were: dissolved oxygen (DO) 4.86-10.53 mg/l, temperature $24-26^{\circ}C$, pH 6.1-8.3, conductivity $35-87{\mu}S/cm$ and ammonia 0.01-0.3 mg/l. Temperature (p = 0.012) and conductivity (p = 0.0001) levels varied significantly between ponds. Overall Specific Growth Rate ranged between 1.8% (0.1692 g/day) and 3.8% (1.9 g/day). Ammonia, DO and pH in the ponds were within the optimal levels for growth of tilapia, while temperature and conductivity were below optimal levels. As temperature and DO increased, growth rate of tilapia increased. However, increase in conductivity, pH and ammonia decreased fish growth rate. Temperature and DO ranging between 27 and $30^{\circ}C$ and 5-23 mg/l, respectively, and SGR of 3.8%/day and above are recommended for higher productivity.

• 한국토양비료학회지
• /
• 제45권6호
• /
• pp.1009-1016
• /
• 2012

The purpose of this study was to determine the effects of organic fertilizers on soil properties and growth and quality of melon. Organic fertilizer was applied in soil at the rate of 0, 0.5, 1, 2N according to Rural Development Administration guideline in Korea. The fertilizer had no effects on plant growth-rate parameters, including plant height, leaf number, and leaf size. There were minor effects on the fruit quality parameters such as fruit weight, fruit length, fruit width, placenta and seed weights, sugar content, and starch content. Ascorbic acid level was decreased as fertilizer level was increased. The level of nitrate in groundwater increased with increased levels of N.

• 생태와환경
• /
• 제53권4호
• /
• pp.336-343
• /
• 2020

Large-scale cultivation of Microcystis aeruginosa in different light conditions was conducted for verifying the cell growth in a greenhouse system. Environmental and chemical parameters of the large-scale culture medium were measured for analyzing the interaction between M. aeruginosa and its symbiotic bacteria. During cultivation, a difference in cell growth pattern was observed between control (natural light) and light-limited groups (reduction of blue, green, and blue/green light, respectively). Comparing the control group, the light reduced groups showed slow and delayed cell growth through the cultivation period. Also, there is differences in the consuming pattern of total nitrogen and total phosphorus which indicated that the possibility of interaction between M. aeruginosa and symbiotic bacteria.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.169-179
• /
• 2005

Nucleate boiling experiments on heating surface of constant wall temperature were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition of heating surface and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames per second using a high-speed CCD camera synchronized with the heat flow rate measurements. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous experimental results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later (thermal) respectively. The comparisons showed good agreement in the initial and thermal growth regions. In the initial growth region including surface tension controlled, transition and inertia controlled regions as divided by Robinson and Judd, the bubble growth rate showed that the bubble radius was proportional to $t^{2/3}$ regardless of working fluids and heating conditions. And in the thermal growth region as also called asymptotic region, the bubble showed a growth rate that was proportional to $t^{1/5}$, also. Those growth rates were slower than the growth rates proposed in previous analytical analyses. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool condition. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• Journal of applied mathematics & informatics
• /
• 제9권2호
• /
• pp.761-769
• /
• 2002

Due to the large scale application of software systems, software reliability plays an important role in software developments. In this paper, a software reliability growth model (SRGM) is proposed. The testing time on the right is truncated in this model. The instantaneous failure rate, mean-value function, error detection rate, reliability of the software, estimation of parameters and the simple applications of this model are discussed .

• Communications for Statistical Applications and Methods
• /
• 제3권1호
• /
• pp.235-242
• /
• 1996

When the linear growth birth and death process observed at a set of equidistant time points, McNeil and Weiss (1997) present a method for simultaneously estimating the Malthusian parameter and the sum of the two parameters under wery restricted assumptions using a diffusion approximation. This article suggests a method, which does not require the restrictions given by Weiss, for estimating simultaneously the Malthusian parameter and the sum of the two parameters.