• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1933-1938
• /
• 2004

Nucleate boiling experiments with constant wall temperature of heating surface were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames a sec using a high-speed CCD camera synchronized with the heat flow rate measurements. The geometry of the bubble during growth time could be obtained from the captured bubble images. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later respectively. The comparisons showed good agreement in the initial and thermal growth regions. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the instantaneous heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool conditions. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• The Korean Journal of Malacology
• /
• v.23 no.1
• /
• pp.25-30
• /
• 2007

In order to estimate the ecological parameters of the population, short-necked clams, Ruditapes philippinarum, were collected from Jindu coast at Hansan Island, from April to December in 2005. The growth of the clam was estimated by von Bertalanffy growth model and each parameters were obtained from a nonlinear regression as $L_{\infty}\;=\;48.8\;mm$, k = 0.28 and $t_0\;=\;-0.88\;(R^2\;=\;0.994)$. Instantaneous coefficient of total mortality (Z) and fishing mortality (F) was calculated to be 0.8614/yr. and 0.6122/yr, respectively. The age at the first capture was estimated to be 2.88 year. Using the present parameter for clam fishing, the yield-per recruit (Y/R) was estimated to be 3.44g. Although the maximum Y/R was obtained under the parameters ($t_c\;=\;3.48\;yr$. and F = 0.9295/yr), it is favorable to maintain the current fishing effort considering the annual fluctuation of the parameters.

• Imaging Science in Dentistry
• /
• v.40 no.3
• /
• pp.143-147
• /
• 2010

Purpose : This study was to investigate whether cervical vertebrae can be utilized in evaluating the growth of the maxilla. Materials and Methods : Fifty one male patients took lateral cephalometric radiographs once in every two years from the age of 8 till 14. Measured parameters were the concavity depth at the lower border of the third and fourth cervical vertebrae, and three analytical maxillary dimensions. Results : The analysis of the maxillary measurements and the concavity depth at the lower border of the cervical vertebrae in the lateral cephalometric radiographs showed that the measured parameters gradually increased as the patients aged. Moreover, while the parameters of the patients in age 8 and 10 did not show any correlation, those of the patients in age 12 and 14 definitely showed the correlations. Conclusions : Although certain correlations were seen in particular parameters, further researches and studies with various parameters and shorter age intervals are needed. The result of this study will help clinicians in making plans and evaluating the proposed treatment plans.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.66.1-66.1
• /
• 2010

Microcrystalline silicon at low temperatures has been developed using plasma enhanced chemical vapor deposition (PECVD). It has been found that energetically positive ion and atomic hydrogen collision on to growing surface have important effects on increasing growth rate, and atomic hydrogen density is necessary for the increasing growth rate correspondingly, while keeping ion bombardment is less level. Since the plasma potential is determined by working pressure, the ion energy can be reduced by increasing the deposition pressure of 700-1200 Pa. Also, correlation of the growth rate and crystallinity with deposition parameters such as working pressure, hydrogen flow rate and input power were investigated. Consequently an efficiency of 7.9% was obtained at a high growth rate of 0.92 nm/s at a high RF power 300W using a plasma-enhanced chemical vapor deposition method (27.12MHz).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.125-132
• /
• 2010

For typical governing dimensionless parameters of Ar = 5, Pr = 1.16, Le = 0.14, Pe = 3.57, Cv = 1.02, $Gr_s=2.65{\times}10^6$, the effects of thermo physical properties such as a molecular weight, a binary diffusivity coefficient, a partial pressure of component B on solutally buoyancy-driven convection (solutal Grashof number $Gr_s=2.65{\times}10^6$) are theoretically investigated for further understanding and insight into an essence of solutal convection occurring in the vapor phase during the physical vapor transport of a $Hg_2Cl_2-N_2$ system. The solutally buoyancy-driven convection is significantly affected by any significant disparity in the molecular weight of the crystal components and the impurity gas of nitrogen. The solutal convection in a vertical orientation is found to be more suppressed than a tenth reduction of gravitational accelerations in a horizontal orientation. For crystal growth parameters under consideration, the greater uniformity in the growth rate is obtained for either solutal convection mode in a vertical orientation or thermal convection mode in horizontal geometry. The growth rate is also found to be first order exponentially decayed for $10{\leq}P_B{\leq}200$ Torr.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.138-141
• /
• 2004

The effect of culture parameters on the production of Colletotrichum gloeosporioides growth inhibitory substance from Bacillus subtilis was investigated. The maximal growth inhibition zone was observed in the medium of pH 7.0. Among the tested carbon sources, glucose showed the largest growth inhibition zone above two fold than other carbon sources. Ammonium sulfate and organic nitrogen sources were effective on the production of growth inhibitory substance. Luria Bertani (LB) medium was the best on the production of antifungal substance from B. subtilis.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.54-59
• /
• 2003

The characteristics of the parameters for the probability distribution of fatigue crack growth life, using the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length equals the number of cycle curves that are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratios of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Wiubull,, showing a slight dependence on specimen thickness and stress intensity level. The shape parameter, $\alpha$, does not show the dependency of thickness and stress intensity level, but the scale parameter, $\beta$, and location parameter, ${\gamma}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.

• Journal of Animal Science and Technology
• /
• v.57 no.11
• /
• pp.39.1-39.5
• /
• 2015

The effects of castration time on growth and carcass traits of elk bulls were investigated. Twelve bulls at 5 years old were raised and fed on concentrate with ad libitum hay. All animals were allocated randomly to each of four treatment groups (3 heads/group). Groups of each treatment were castrated surgically in March, April or June and managed together with non-castration (entire) treatment. All elk bulls in the trial were slaughtered at same time. Growth parameters, carcass yield and composition were recorded. The total gain and average daily gain was higher when castrated in April (p < 0.05). The entire elk produced heaviest and highest in saddle and brisket portions (p < 0.05). It is apparent that the castrate animals carried more total fat weight and percentages than the entire males (p < 0.05). It was found that loin muscles from non-castrated elk, in comparison with those from castrated one, had higher content of moisture and lower content of fat (p < 0.05). In this study, growth parameters, carcass yields and chemical composition were greatly affected by castration time.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.174-177
• /
• 2004

The nickel-based alloy Nimonic 80A possesses strength, and corrosion, creep and oxidation resistance at high temperature. These products are used for aerospace, marine engineering and power generation, etc. The control of forging parameters such as strain, strain rate, temperature and holding time is important because the microstructure change in hot working affects the mechanical properties. It is necessary to understand the microstructure variation evolution. The microstructure change evolution occurs by recovery, recrystallization and grain growth phenomena. The dynamic recrystallization evolution has been studied in the temperature range $950-1250^{\circ}C$ and strain rate range $0.05-5s^{-1}$ using hot compression tests. The metadynamic recrystallization and grain growth evolution has been studied in the temperature range $950-1250^{\circ}C$ and strain rate range 0.05, $5s^{-1}$, holding time range 5, 10, 100, 600 sec using hot compression tests. Modeling equations are developed to represent the flow curve, recrystallized grain size, recrystallized fraction and grain growth phenomena by various tests. Parameters of modeling equation are expressed as a function of the Zener-Hollomon parameter. The modeling equation for grain growth is expressed as a function of initial grain size and holding time.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.733-739
• /
• 1998

C-axis oriented zinc oxide thin films were deposited on Cornign 1737 glass substrate by an rf magnetron sputtering technique. The effects of deposition parameters and post heat-treatment on the crystallinity and electical properties of ZnO films were investigaed. As-deposited ZnO films showed the strong c-axis growth and excellent crystallinity under the deposition conditions as follows: substrate temperature 350$^{\circ}C$ ; growth and excellent crystallinity under the deposition conditions as follows ; substrate temperature 350$^{\circ}C$ rf power 75W ; gas pressure 6m Torr; percentage of oxygen 50% The higher heat-treating temperatue was the stronger c-axis growth and the better crystallinity of the deposited ZnO films were. The resistivity of ZnO films was significantly affected by deposition parameters and post heat-treatment. With increasing increased. After post heat-treating at 400$^{\circ}C$ in air the resistivity of ZnO films increased but post heat-treat-ing temperature 500$^{\circ}C$ rather diminished the film resistivity.