• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.343-350
• /
• 1995

A Abstract Systematic studies of the effects of crystalline forms of starting powders and p processing variables on the texture of hot - pressed silicon carbide are described. The results I indicate that hot - pressing of $\beta$ - SiC can produce strong textures and composite type duplex microstructure due to the ${\beta} {\rightarrow} {\alpha}$ phase transformation of SiC. The texture variations d during post - annealing have been observed. In the case of using a - SiC as starting pow¬d ders, the degree of preferred orientation by hot - pressing is relatively weak.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.463-465
• /
• 2002

In order to increase perpendicular magnetic anisotropy of magnetic layer and prepare magnetic recording layer with a good quality by epitaxial growth between magnetic layer and, we prepared Co$\_$77/Cr$\_$20/Ta$_3$/Si doublelayer for perpendicular magnetic recording media which was promoted as next generation recording media on slide glass substrate. The thickness of magnetic layer and Underlayer were varied from 20 to 100 nm and 5 to 100 m, respectively. The surface morphology and crystal structure of the CoCrTa/Si film were examined with XRD and AFM. Prepared thin films showed improvement of dispersion angle of c-axis orientation Δ$\theta$$\_$50/ caused by inserting amorphous Si underlayer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.281-281
• /
• 2010

In this study, ZnO nanorod arrays are grown on organic substrates by hydrothermal method which requires a low temperature, simple process, and no vacuum. The structure properties of ZnO nanorods were examined by field emission scanning electron microscopy and X-ray diffraction. To detect the optical transmission, ultraviolet visible spectrophotometer was also used. From results, the ZnO nanorods were grown the horizontal growth on the organic substrates had the length of over $10\;{\mu}m$. After deposition of ZnO seed layer, the ZnO nanorod arrays had uniformity orientation and length.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.682-688
• /
• 2009

A periodic away of zinc oxide(ZnO) micro-rods as fabricated by using chemical bath deposition and photo-lithography. Vertically aligned ZnO micro-rods array was successfully grown by chemical bath deposition method on ZnO seed layer. The ZnO seed layer was deposited on glass and the patterning was made by standard photo-lithography technique. The selective growth of ZnO micro-rods as achieved with the masked ZnO seed layer. The fabricated ZnO micro rods were found to be single crystalline and have grown along hexagonal c-axis direction of (0002) which is same as the preferred growth orientation of ZnO seed layer.

• Progress in Superconductivity
• /
• v.2 no.1
• /
• pp.15-19
• /
• 2000

[ $YBa_2Cu_3O_{7-\delta}$ ] thin films were deposited by laser ablation using modified melt-textured grown targets. As the laser energy density was increased, the films showed an increasing c-axis orientation and an improvement of superconducting properties. However, at 4 $J/cm^2$, the degree of c-axis alignment and $J_c$ of the film were considerably reduced. These were attributed to the enhanced a-axis outgrowths. It was shown that the increased laser energy density resulted in the formation of $Y_2O_3$ inclusions during the c-axis film growth, and that these inclusions nucleated the a-axis outgrowths.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.314-319
• /
• 1998

TiN thin films were deposited on SKD 61 steel substrates by reactive sputtering under various deposition conditions, and subsequently their growth characteristics and properties were studied. Deposition rate was proportionally increased with total gas pressure as well as RF input power, while the increase of nitrogen in the reaction gas induced a significant suppression of deposition rate. The resulted films exhibited hillocks on the surface. The TiN film prepared using a typical deposition condition showed a (111) preferred orientation and maintained the stoichiometry of pure TiN.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1021-1026
• /
• 2003

The problem of predicting the fracture strength behavior in orthotropic plate with a crack inclined with respect to the principal material axes is analyzed. Both the load to cause fracture and the crack direction of crack growth arc of interest. The theoretical results based on the normal stress ration theory show significant effects of biaxial loading and the fiber orientation on the crack growth angle and the critical stress. The additional term in the asymptotic expansion of the crack tip stress field appears to provide more accurate critical stress prediction.

• Tunnel and Underground Space
• /
• v.8 no.2
• /
• pp.96-106
• /
• 1998

Rock contains discontinuities at all scales. These discontinuities make rock behave in a complex way. This paper discusses a new approach to underground design based on the theory of rock fracture mechanics. The mechanism of deformation and failure of coal was studied by observing the distributions of length, orientation and spacing of the pre-existing as well as stress-induced cracks. Different types of crack information. The crack information is dependent on the scale used. The cracks propagate along the intersections of the pre-existing cracks, and both extensile and shear crack growth occur depending on the direction of the load relative to the bedding planes. An analytical model that takes into account both shear and extensile crack growth was developed to predict the nonlinear stress-strain behavior of coal including strain-hardening and strain-softening.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.202-203
• /
• 2018

Chemistry and microstructure of steel reinforcement bars play an important role to control the corrosion in concrete environments. In present study, we have chosen two different microstructure of steel rebars produced from companies and assessed their corrosion characteristics in simulated concrete pore (SCP) solution with prolonged exposure periods. Hot rolled steel rebar showed more corrosion resistance compare to thermo-mechanically treated (TMT) one. The growth of passive is greater in hot rolled (A) than TMT (B) due to orientation of microstructure. TMT steel rebar exhibit distorted microstructure with many micro cells which enhances the galvanic coupling and induce the deterioration while on the other hand hot rolled rebars exhibit fine grain boundary which responsible in growth of uniform, adherent and protective passive film resultant improved impedance was observed.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.17-22
• /
• 1998

B-doped ZnO thin films on glass substrates were prepared by sputtering the ceramic targets which had been prepared by sintering disks consisting of ZnO and various amounts of B2O3 While pure ZnO films show-ed a c-axis oriented growth the B-doping retarded the prefered orientation and grain growth of the film. Electron concentrations for undoped and B-doped ZnO films were on the order of 7.8${\times}$1018 cm-3 and 5${\times}${{{{ {10 }^{20 } }} c{{{{ {m }^{-3 } }} respectively. The electron mobility however decreased with the B-doping concentration. Optical meas-urements on the films showed that the average transmittance in the visible range was higher than 85% The measurements also indicated a blueshift of the absorption edge with doping.