References
- Fracture mechanics of rock Atkinson, B. K.
- Bulletin of the American Association of Petroleum Geologists v.44 no.5 Laboratory technique for plastic saturation of porous rocks (Geological Notes) Cavanaugh, R. J.;Knutson, C.F.
- Mining Science and Technology v.8 Anisotropy in jointed rock mass breakage Chappell, B. A.
- Journal of Collid and Interface Science v.120 no.1 Fractal dimensions of coal particles Friesen, W. I.;Mikula, R. J.
- Canadian Journal of Earth Science v.17 Impregnation technique using colored epoxy to define porosity in petrographic thin sections Gardner, K. L.
- Methods of geological engineering in discontinuous rocks Goodman, R.E.
- Introduction to rock mechnics(Second Ed.) Goodman, R. E.
- Journal of Geophysical Research v.81 no.20 Comparison of calculated and observed crack densities and seismic velocities in Westerly Granite Handley, K.
- 28th US Symposium of Rock Mechanics Determination of rock fracture parameters from crack models for failure in compression Kemeny, J. M.;Cook, N. G. W.
- Constitutive Laws for Engineering Materials, Theory and Application v.2 Crack models for the failure of rocks in compression Kemeny, J. M.;Cook, N. G. W.;
- Toughening Mechanisms in Quasi-Brittle Materials Micromechanics of deformation in rocks Kemeny, J. M.;Cook, N. G. W.
- Int. J. Rock Mech. Min. Sci & Geomech, Abstr. v.28 no.6 A model for non-linear rock deformation under compression due to sub-critical crack growth Kemeny, J. M.
- Proceedings of Eleventh Annual Workshop, Generic Mineral Technology Center, Mine Systems Design and Ground Control The mechanics of deformation and failure in coal Kemeny, J. M.;Jeon, S.
- Techtonophysics v.100 Microcracks in rocks: A review Kranz, R. L.
- Ph.D. Dissertation, Department of Mining and Geological Engineering, The University of Arizona Failure and deformation of rocks in compression for underground design Jeon, S.
- Appl. Mech. Rev. v.45 Extensile cracking in porous rock under differntial compressive stress Myer, L.R.;Kemeny, J.M.;Cook, N. G. W.;Ewy, R.;Suarez, R.;Zheng, Z.
- Journal of Sedimentary Petrology v.40 no.4 Use of pore casts and scanning electron microscope to study pore geometry Pittman, E.D.;Duschatko, R.W.
- Int. J. Rock Mech. Min. Sci & Sci & Geomech. Abstr v.26 no.2 Prediction of dynamic frcture models in coal mining (Technical Note) Prucz, J. C.;Fu, S. H.
- Int. J. Rock Mech. Min. Sci & Geomech. Abstr. v.25 no.6 Elastic wave velocity and attenuation as used to define phases of loading and failure in coal Shea, V. R.;Hanson, D. R.
- The Physics and Chemistry of Minerals and Rocks Microcracks in rocks Simmons, G.;Richter, D.
- Mining Science and Technology v.3 Brittleness and the mechanical winning of coal Singh, S. P.
- Int. J. Rock Mech. Min. Sci & Geomech. Abstr. v.21 no.1 Determination of the anisotropic elastic moduli of coal Szwilski, A. B.
- Quantitative sterelogy Underwood, E.E.
- Int. J. Rock Mech. Min. Sci & Geomech. Abstr. v.30 no.7 Micromechanical modeling of tuffaceous rock for applycation in muclear waste storage Wang, R.;Kemeny, J.M.
- Mechanics of Materials v.4 Geometric probability approach to the characterization and analysis of microcracking in rocks Wong, T. -f.
- Ph. D. Dissertation, University of California Compressive Stress-induced Microcracks in Rocks and Applications to Seismic Anisotropy and Borehole Stability Zheng, Z.
- Int. J. Rock Mech. Min. Sci & Geomech. Abstr. v.27 no.6 Mixed-mode fracture toughness testing of coal Zipf, R. K.;Bieniawski, Z. T.