• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.896-899
• /
• 2003

Using hi plasma and Fe-Phthalocyanine, carbon nanofibers have been synthesized a low temperature. The carbon nanofibers had about In nm diameter and up to $10{\mu}m$ length. These were grown in random orientation. There are two shapes in the CNFs, screw and straight line shapes. Furthermore, we found the selective growth of nanofibers on the scratched substrates.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.145-150
• /
• 1998

ZnGa2O4 thin film phosphors were deposited on Si(100) (111) wafers by rf magnetron sputtering. The ef-fects of substrates and deposition parameters on the growing mechanisms were studied. As a results of the effect of substrate temperature tranistions of growth orientation and different growing behaviors were ob-served. Also polycrystalline ZnGa2O4 thin film could not be achieved without oxygen gas. PL spectrum of ZnGa2O4 thin films were analyzed and showed broad band luminescence spectrum.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.275-280
• /
• 1997

We have investigated the deposition characteristics of (Ni0.8Fe0.2)20Ag80 thin films as a function of chamber pressure and nitrogen flow rate with scanning electron microscopy(SEM), atomic force microscopy(AFM), XRD and $\alpha$-step. The deposition rate of these film is decreased with increasing the chamber pressure and the nitrogen flow rate. With raising the chamber pressure, the growth mode of thin film is changed from island growth to columnar one, which is probably due to energy of atom. Contrary, the nitrogen flow rate is raised, growth mode is changed from columnar to island one. According to the XRD patterns, the preferred orientation is inhibited as the nitrogen flow rate is kept above 10 sccm, but that is nearly independent on the chamber pressure. When the chamber pressure decrease or the nitrogen flow rate increase, phase separation into permoally and silver is occured.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.270-278
• /
• 1995

Nd : YAl3(BO3)4 (NYAB) single crystal has been developed for green laser. In this experiment, we found K2O/3MoO3/0.5B2O3 to be a suitable flux for NYAB crystal growth, and grew NYAB crystal by TSSG method using this flux. By varying the cooling rate of solution, seed orientation, and rotation speed, the effects of these growth conditions on the crystal quality and its morphology were examined. Suitable growth conditiions were a cooling rate slower than 2.4$^{\circ}C$/day, the rotation speed of 25~30 rpm, and the <001> seed orienttion. The phases of grown crystal, coexisting and volatile materials were investigated by X-ray diffraction. In addition, the possiblity of laser action was examined by UV analysis.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.157-159
• /
• 1998

Sapphire crystals were grown by Horizontal Bridgman method. The effects of sliding rate (growth rate) of Molybdenum container, growth atmosphere, temperature gradient and orientation of see on crystal qualities were investigated. The size of the crystals grown was up to 150-200 mm in length, 90 mm in width and 25-35 mm in thickness. Crystals grown under the optimum conditions were colorless, transparent and could not be observed and macroscopic defects, such as bubbles, cracks, twins and mosaic structure. With the grown crystals, prototypes of sapphire substrate for blue wafers were characterized. As a result, we can get hight quality of sapphire wafers with c-axis, 1.5 inches in diameters and 0.33 mm in thickess.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.3
• /
• pp.33-39
• /
• 2017

This study presents that the orientation and the geometry of seed affect on the growth behavior of melt processed single grain REBCO bulk superconductor and its magnetic properties. The effects of seed geometry have been investigated for thin $30mm{\times}30mm$ rectangular powder compacts. Single grain REBCO bulk superconductors have been grown successfully by a top seed melt growth method for 8-mm thick vertical thin REBCO slab. Asymmetric structures have been developed at the front surface and at the rear surface of the specimen. Higher magnetic properties have been obtained for the specimen that c-axis is normal to the specimen surface. The relationships between microstructure, grain growth and magnetic properties have been discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.255-262
• /
• 2003

In this paper, an investigation on the ZnO film deposition using radio-frequency magnetic sputtering techniques on aluminum bottom electrode for film bulk acoustic wave resonator (FBAR) filter applications and the temperature effects on the ZnO film growth is presented. The investigation on how much impact the actual process temperature may have on the crystal growth is more meaningful if it is considered that the piezoelectricity property of ZnO films plays a dominant role in determining the resonance characteristics of FBAR devices and the piezoelectricity is determined by the degree of the c-axis preferred orientation of the deposited ZnO films. In this experiment, it was found that the growth of ZnO crystals has a strong dependence on the deposition temperature ranged from room temperature to $350^{\circ}C$ regardless of the RF powers applied and there exist 3 temperature regions divided by 2 critical temperatures according to the degree of the c-axis preferred orientation. Overall, below $200^{\circ}C$, ZnO deposition results in columnar grains with a highly preferred c-axis orientation. With this ZnO film, a multilayered FBAR structure could be realized successfully.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.723-735
• /
• 2017

The explosive growth rates in sales of climbing clothes-centered outdoor wear has slowed; however, athleisure wear worn while enjoying sports activities is still popular. This research study investigated differences between pursuing benefits of athleisure clothing and purchase intentions of athleisure clothing according to lifestyles, targeting male and female consumers aged 20s-50s. Analytic research data was statistically processed with the use of SPSS 18.0. The factor analysis and reliability analysis, multiple-regression analysis and t-test analysis and descriptive statistics were conducted. The study analyzed the results of pursuing benefits of athleisure clothing according to lifestyle. The study results showed that fashion oriented, health oriented, and sociability oriented factors had significant effects on youth and fashion; however, rational consumption, leisure orientation, sociability orientation, and value oriented factors showed significant effects on everyday clothing functionality. Health orientation and leisure orientation factors also exerted significant effects on comfort; in addition, the factors of fashion oriented, value oriented, rational consumption, and health orientation also had significant effects on ideal body image. This study investigated purchase intentions for athleisure clothing according to lifestyles. The study results revealed that fashion oriented, leisure oriented, private life centered, and health oriented factors also showed significant effects on purchase intentions for athleisure clothing.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1171-1176
• /
• 2002

The growth characteristics on the MgO thin films prepared by the e-beam evaporation method have been investigated. We observed the film of preferred orientation and surface morphology with various parameters such as substrate temperature, deposition rate on Si(100) and slide glass respectively. Consequently, it was shown that MgO(111) preferred orientation films can be obtained as the deposition rate was increased on Si(100) substrate. MgO(220) peak was found as the substrate temperature was increased. Whereas, in case of slide glass the orientation is changed from (200) to (111) by substrate temperature. Also we investigated the relationship between the film characteristics and the orientation of MgO thin films.