• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.461-468
• /
• 2016

One of the important phytohormones produced by plant growth promoting bacteria is the auxin; indole-3-acetic acid (IAA), with L-tryptophan as the precursor. In this study, we focused on the investigation of optimal conditions for the production of IAA by Bacillus megaterium BM5. We investigated culturing conditions, such as incubation temperature, pH of the culture medium and incubation period, with varying media components such as inoculation volume, tryptophan concentration and carbon and nitrogen source. Besides, optimization study intended for high IAA production was carried out with fermentation parameters such as rpm and aeration. The initial yield of $42{\mu}g\;IAA\;ml^{-1}$ after 24 hr increased to $85{\mu}g\;ml^{-1}$ when 5% (v/v) of L-tryptophan was used in the culture broth. The maximum yield of $320{\mu}g\;IAA\;ml^{-1}$ was observed in trypticase soy broth (TSB) supplemented with starch and soybean meal as C and N sources with a C/N ratio of 3:1 (v/v) at $30^{\circ}C$, pH 8.0 for 48 hrs with 1.0 vvm and 250 rpm in 5 L working volume using 10 L scale fermenter. The bacterial auxin extracted from the culture broth was confirmed by thin layer chromatography and high-performance liquid chromatography and effect on plant growth was confirmed by root elongation test.

• 대한기계학회논문집A
• /
• 제32권12호
• /
• pp.1132-1139
• /
• 2008

The aim of this study is to apply shape optimization technique for the repair of aging airframe components, which may extend fatigue life substantially. Free-form optimum shapes of a cracked part to be reworked or replaced are investigated with the objective to minimize the peak local stress concentration or fatigue-damage. Iterative non-gradient method, which is based on an analogy with biological growth, is employed by incorporating the robust optimization method to take account of the stochastic nature of the loading conditions. Numerical examples of optimal hole shape in a flat plate are presented to validate the proposed method. The method is then applied to determine the reworked or replacement shape for the repair of a cracked rib in the rear assembly wing body of aircraft.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.199-202
• /
• 2000

Optimization of submerged culture conditions for the production of exo-biopolymer from Paecilomyces japonica was studied. Maltose, yeast extract and potassium phosphate were the most suitable sources of carbon, nitrogen, and inorganic salt, respectively, for both production of the exo-biopolymer and mycelial growth. The optimal culture conditions in flask culture were pH 5.0, $25^{\circ}C$ and 150 rpm in a meidum containing of 30 g maltose, 6 g yeast extract, 2 g polypeptone, 0.5 g $K_2HPO_4$, 0.2 g $KH_2PO_4$, 0.2 g $MnSo_4\;{\cdot}\;5H_2O$, 0.2 g $MgSO_4\;{\cdot}\;7H_2O$ in 1-L distilled water. Exo-biopolymer production and mycelial growth in the suggested medium were significantly increased in a 2.5-L jar fermentor, where the maximum biopolymer concentration was 8 g/1.

• 한국미생물·생명공학회지
• /
• 제17권6호
• /
• pp.619-623
• /
• 1989

효모의 성장 및 에탄을 생산에 미치는 온도의 영향에 대해서 회분식 배양을 실시한 결과 최대의 비효모 성장속도를 나타내는 온도는 36$^{\circ}C$였고 최대의 비에탄을 생산속도를 나타내는 온도는 33$^{\circ}C$임을 알 수 있었다. 온도의 영향에 대한 실험을 토대로 수학적 모델식을 선정했으며 매개변수를 추정하여 모사를 해 본 결과 배양 초기에는 36$^{\circ}C$ 정도의 온도에서 배양하다가 점차로 온도를 낮추어 3$0^{\circ}C$ 정도로 배양하는 것이 최적의 발효공정임을 알 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.40-45
• /
• 2001

The relationship between structural geometry and number of life cycles to failure is investigated to improve the fatigue life of structural components. The linear elastic fracture mechanics(LEFM) approach is integrated with shape optimal design methodology. The primary objective of this study is to decide an optimal shape for enhancing the life of the structure. The results from LEFM analyses are used in the fatigue model to predict the life of the structure before failure is occurred. The shape of the structure is optimized by using the growth strain method. Relevant issues such as problem formulation, finite element modeling are explained. Three design examples are solved, and the results show that, with proper shape changes, the life of structural systems subjected to fatigue loads can be enhanced significantly.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.609-625
• /
• 2015

Management of infrastructure stock is essential in sustainability of society, and its analysis and optimization are studied in the light of control system modeling in this paper. At the first part of the paper, cost of stock management is analyzed based on macroscopic statistics on infrastructure stock and economical growth. Stock management burden relative to economy is observed to become larger at low economic growth periods in developed economies. Then, control system modeling of stock management is introduced and by augmenting maintenance actions as control input, dynamic behavior of stock is simulated and compared with existing time history statistics. Assuming steady state conditions, applicability of the model to cross sectional data is also demonstrated. The proposed model is enhanced so that both preventive and corrective maintenance can be included as system inputs, i.e., feedforward and feedback control inputs. Optimal management strategy to achieve specified deteriorated stock level with minimal cost, expressed in terms of preventive and corrective maintenance actions, is derived based on estimated parameter values for corrosion of steel bridges. Relative cost effectiveness of preventive maintenance is shown when target deteriorated stock level is lower.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.362-363
• /
• 2006

Nano-structured tungsten carbide compacts with cobalt matrices (WC-Co) offer new opportunities for achieving superior hardness and toughness combinations. A unified modeling and simulation tool has been developed to produce maps of sintering pathways from nanocrystalline WC powder to sintered nano-structured WC-Co compacts. This tool includes (1) die compaction, (2) grain growth, (3) densification, (4) sensitivity analysis, and (5) optimization. All material parameters were obtained by curve fitting based on results with two WC-Co powders. Critical processing parameters are determined based on sensitivity analysis and are optimized to minimize grain size with high density.

• Current Research on Agriculture and Life Sciences
• /
• 제32권4호
• /
• pp.179-183
• /
• 2014

Optimization of the protocorm-like body (PLB) formation of Phalaenopsis and Dendrobium hybrids was performed by determining the effects of plant growth regulators (PGRs) and different parts and division sizes of the PLB. For both genera, the base part was the best for the proliferation of PLBs, yielding the highest number of PLBs on a PGR-free medium for Phalaenopsis and medium containing $0.1{\mu}M$ NAA and $10.0{\mu}M$ BAP for Dendrobium. As regards the division size, four-division sections resulted in a higher PLB formation efficiency for Phalaenopsis, while two-division sections produced a higher PLB formation efficiency for Dendrobium. It is expected that these findings will be applicable to efficient PLB formation of other Phalaenopsis and Dendrobium orchids.

• KSBB Journal
• /
• 제6권1호
• /
• pp.91-98
• /
• 1991

The media compositions and culture conditions were optimized for mycelial growth of Coriolus versicolor and Lentinus edodes. Media composition for optimal growth of Coriolus versicolor was 2.0% glucose 0.4% peptone and 0.6% yeast extract. Media composition for optimal growth of Lenttnus edodes was 2.0% glucose 2.0% starch 0.4% bacto-soytone and 0.6% yeast extract. The media supplemented with KH2PO4, 0.046% KH2PO4 0.1% and MgSO4, .7H2O 0.05% supported better mycelial growth than the media without mineral salts. The optimum temperature for mycelial growth ranged from $25^{\circ}C$-28$^{\circ}C$. The optimum pH range for mycelial growth of Coriolus versicolor was 5.2~5.6 while that of Lentinus edodes appeared to be 5.75.

• Journal of Microbiology
• /
• 제34권2호
• /
• pp.179-183
• /
• 1996

Streptoccus Pneumoniae (pneumococcus), the most common cause of bacterial pneumonia, has an ample polysaccharide (PS) capsule that is highly antigenic and is the source of PS vaccine. This investigation was undertaken to optimize the culture conditions for the production of capsulard PS by type 1 pneumococcus. Among several culture media, brain heart infusion (BHI) and Casitone based media were found to support luxuriant growth of pneumococcus type 1 at the same level. Because BHI medium is rather expensive and more complex than the Casitone based media, the Casitone based media was uwed to study optimization of the culture condition. The phase of growth which accomodated maximum PS production was logarithmic phase. Concentrations of glucose greater than 0.2% did not ehnahce growth or PS production. Substitution of netrogen sources with other resources or supplementation of various concentrations of metal ion (with the exception of calcium ion) had adverse affects on growth and PS production. On the other hand, low level aeration was beneficial for increased PS production. Addition of 3 mg/1 concentration of methionine, phenylalanine, and threonine were found to enhance growth and PS production. The synerigistic effect of all the favorable conditions observed in pneumococcal growth assays provided a two-fold cummulative increase in capsular PS production.