• Asian Pacific Journal of Cancer Prevention
• /
• 제15권23호
• /
• pp.10151-10156
• /
• 2015

4-Hydroxynonenal (4-HNE) is a stable end product of lipid peroxidation, which has been shown to play an important role in cell signal transduction, while increasing cell growth and differentiation. 4-HNE could inhibit phosphatase and tensin homolog (PTEN) activity in hepatocytes and increased levels have been found in human invasive breast cancer. Here we report that 4-HNE increased the cell growth of breast cancer cells as revealed by colony formation assay. Moreover, vascular endothelial growth factor (VEGF) expression was elevated, while protein levels of hypoxia inducible factor 1 alpha (HIF-$1{\alpha}$) were up-regulated. Sirtuin-3 (SIRT3), a major mitochondria NAD+-dependent deacetylase, is reported to destabilize HIF-$1{\alpha}$. Here, 4-HNE could inhibit the deacetylase activity of SIRT3 by thiol-specific modification. We further demonstrated that the regulation by 4-HNE of levels of HIF-$1{\alpha}$ and VEGF depends on SIRT3. Consistent with this, 4-HNE could not increase the cell growth in SIRT3 knockdown breast cancer cells. Additionally, 4-HNE promoted angiogenesis and invasion of breast cancer cells in a SIRT3-dependent manner. In conclusion, we propose that 4-HNE promotes growth, invasion and angiogenesis of breast cancer cells through the SIRT3-HIF-$1{\alpha}$-VEGF axis.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.349-366
• /
• 1994

The method of treatment in skeletal Class III malocclusion must be chosen according to an etiology and timing of the treatment. Maxillry protraction has been used as an effective treatment method in growing children with maxillary deficiency. The efficacy of maxillary protraction has been viewed as a result of downward-backward displacement of mandible and compensatory dental displacement during the treatment rather than forward -downward growth of maxilla itself. In this study, 104 subjects treated with maxllary protraction, and 19 males and 21 females with known annual growth amount have been chosen longitudinally as treated group and normal group, respectively. And changes in position of maxilla, mandible and dentition have been comparatively analyzed on the lateral cephalometric radiographs by age. The results were as follows : 1. Treated group showed more forward movement of maxilla compare to the normal group and the mandible displaced backward compare to the normal group. 2. Downward movement of maxilla in treated group was similar to that of normal group with statistical signigicance in female 12 year old group and downward movement of mandible in treated group was similar to that of normal group. 3. In treated group, maxillary central incisor moved more forward than the normal group with statistical significance in male 8, 10 year-old groups and female 8, 9, 10 year-old groups. In treated group, downward movement of maxillary central incisor was similar to that of the normal group with statistical significance in male and female 7,8 year-old groups. Considering the above results and the duration of the treatment, the forward movement of maxilla due to maxillary protraction was effective compared to normal growth amount of the normal group.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.168-172
• /
• 2006

Single pulse of 2.0 to 3.5 kJ from $150{\mu}F$ capacitor was applied to the cp Ti rod for its surface modification and heat treatment. Under the conditions of using 2.0 and 2.5 kJ of input energy, no phase transformation has been occurred. However, the hardness and tensile strength decreased and the elongation increased after a discharge due to a slight grain growth. By using more than 3.0 kJ of input energy, the electro discharge made a phase transformation and the hardness at the edge of the cross section increased significantly. The Ti rod before a discharge was lightly oxidized and was primarily in the form of $TiO_2$. However, the surface of the Ti rod has been instantaneously modified by a discharge into the main form of TiN from $TiO_2$. Therefore, the electro discharge can modify its surface chemistry in times as short as $200{\mu}sec$ by manipulating the input energy, capacitance, and discharging environment.

• 한국조경학회지
• /
• 제18권1호
• /
• pp.33-40
• /
• 1990

The purpose of this study is to suggest objective basic data for the apartment interior landscape project through the quantitative analysis of the apartment residents' satisfaction on the apartment interior landscape. 1. The major variables related to the interior landscape expert's satisfaction were the interest of the broadcasting of the interior landscape, garden belong to oneself, the intention of the modification of the apartment framework for the interior plantscape, the illumination for the indoor Plants, the season feeling through the int erior plantscape, the psychological effect of the indoor plants, income, the apartment framework and interior plants, the experience and knowledge about the indoor plants, floor space, utilizing veranda as a garden. 2. The major variables related to the general residents' satisfaction included the experience and knowledge on the indoor plants, veranda space, the season feeling through the interior plantscape, the illumination for the interior plants, the interest of the broadcasting of the interior landscape, the intention of the modification of the apartment framework for the interior plantscape. 3. According to the multiple regression analysis, the 'R2'of the major variables related to the experts' satisfaction has been obtained as 75.55%, and that of the varibles related to the general residents' satisfaction, 23.49 %. 4. Such variables as the season feeling through the interior plantscape, the Interest of the broadcasting of the interior landscape, and the intention of the modification of the apartment framework for the interior plantscape for the exports and the general residents are supposed that we develope new interior plants as well as the interior plantscape for the growth of the plants regarding the apartment framework. 5. The interior landscape experts were more positive than the general residents in using the interior landscape materials including indoor plants. 6. The feelings about building layout and the satisfaction in exterior spaces expended the interior landscape, visually, were reasons for the satisfaction of the apartment interior landscape.

• 한국주조공학회지
• /
• 제37권5호
• /
• pp.148-156
• /
• 2017

The effects of minor additives on the casting properties of AC4A aluminum alloys were investigated. Measurements of the cooling curve and microstructure observations were conducted to analyze the effects of Ti-B and Sr minor elements during the solidification process. A fine grain size and an increase in the crystallization temperature for the ${\alpha}-Al$ solution were evident after the addition of 0.1wt% Al-5%Ti-1%B additive. The modification effect of the eutectic $Mg_2Si$ phase with the addition of 0.05% Al-10%Sr additive was prominent. A fine eutectic $Mg_2Si$ phase and a decrease in the growth temperature of the eutectic $Mg_2Si$ phase were evident. Fluidity, shrinkage and solidification-cracking tests were conducted to evaluate the castability of the alloy. The combined addition of Al-5%Ti-1%B and Al-10%Sr additives showed the maximum filling length owing to the effect of the fine ${\alpha}-Al$ grains. The macro-shrinkage ratio increased, while the micro-shrinkage ratio decreased with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives. The macro-shrinkage ratio was nearly identical, while the micro-shrinkage ratio increased with the addition of the Al-10%Sr additive. The tendency of the occurrence of solidification cracking decreased owing to the effect of the fine ${\alpha}-Al$ grains and the modification of the $Mg_2Si$ phase with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives.

• 공업화학
• /
• 제31권1호
• /
• pp.67-72
• /
• 2020

Biomaterials are frequently functionalized with Arg-Gly-Asp (RGD) peptides to provide cell adhesion sites. In this study, RGD peptides were enzymatically coupled on to the surface of fibroin microspheres. Papain exhibited a strong preference for dansyl phenylalanine for the peptide formation with fibroin microspheres. Thus, RGD1 peptide was designed to carry cysteine to both sides of the sequence, glycine as a spacer and two residues of phenylalanine at the C-terminal (CRGDCGFF). The enzymatic modification facilitated by an increasing amount of substrate and by the presence of organic solvent, dimethylsulfoxide at 25% (v/v). Microspheres coupled with RGD1, showed a significantly different precipitation property and an increased apparent volume, possibly due to the steric hindrance of RGD peptides on the surface. Transmission electron microscopy also confirmed the presence of cysteine residues in RGD1 coupled on the surface of microspheres stained with gold nanoparticles. RGD1-microspheres significantly facilitated the growth of murine fibroblast 3T3 cells even under non-adhesion culture conditions.

• BMB Reports
• /
• 제31권2호
• /
• pp.123-129
• /
• 1998

Foreign proteins, $endo-{\beta}-1,4-glucanase$ of Bacillus subtilis, preS1+S2 region of hepatitis B virus large surface antigen, human ${\beta}_2-adrenergic$ receptor ($h{\beta}_{2}AR$), and bovine growth hormone (bGH) were expressed in Saccharomyces cerevisiae and secreted into the medium. These proteins were expressed using the alcohol dehydrogenase I (ADH1) promoter of Saccharomyces cerevisiae and secreted by signal sequence of the 97 K killer toxin gene of doublestranded linear DNA plasmid (pGKL1) of S. cerevisiae. All these proteins underwent severe modifications; in particular, N-glycosylation in the case of $endo-{\beta}-1,4-glucanase$, $h{\beta}_2AR$, and preS1+S2. Seventy four percent of the expressed $endo-{\beta}-1,4-glucanase$ was secreted into the culture medium. Highly modified proteins were detected in the culture medium and in the cell. Expressed $h{\beta}_2AR$, which has seven transmembrane domains, remained in the cell. The degrees of secretion and modification and the states of proteins in the culture medium and in the cell were quite different. These results indicated that the nature of the protein has a critical role in its secretion and modifications.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.148-148
• /
• 2017

Surface modification is a type of mechanical manipulation skills to achieve extensive aims including corrosion control, exterior appearance, abrasion resistance, electrical insulation and electrical conductivity of substrate materials by generating a protective surface using electrical, physical and chemical treatment on the surface of parts made from metallic materials. Such surface modification includes plating, anodizing, chemical conversion treatment, painting, lining, coating and surface hardening; this study conducted cavitation experiment to assess improvement of durability using anodizing. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant speed. In addition, using galvanostatic method, it was maintained at processing time of 40minutes for 10 to $30mA/cm^2$. The cavitation experiment was carried out with an ultra sonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1mm. The specimen after the experiment was cleaned in an ultrasonic bath, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the study, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with the anodizing process time.

• Journal of Microbiology
• /
• 제45권1호
• /
• pp.34-40
• /
• 2007

In budding yeast, G2/M transition is tightly correlated with bud morphogenesis regulated by Swel and septin that plays as a scaffold to recruits protein components. BNI5 isolated as a suppressor for septin defect is implicated in septin organization and cytokinesis. The mechanism by which Bni5 regulates normal septin function is not completely understood. Here, we show that Bni5 phosphorylation is required for mitotic entry regulated by Swel pathway. Bni5 modification was evident from late mitosis to G1 phase, and CIP treatment in vitro of affinity-purified Bni5 removed the modification, indicative of phosphorylation on Bni5. The phosphorylation-deficient mutant of BNI5 (bni5-4A) was defective in both growth at semi-restrictive temperature and suppression of septin defect. Loss of Bni5 phosphorylation resulted in abnormal bud morphology and cell cycle delay at G2 phase, as evidenced by the formation of elongated cells with multinuclei. However, deletion of Swel completely eliminated the elongated-bud phenotypes of both bni5 deletion and bni5-4A mutants. These results suggest that the bud morphogenesis and mitotic entry are positively regulated by phosphorylation-dependent function of Bni5 which is under the control of Swel morphogenesis pathway.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.73-80
• /
• 2006

Sulfonated poly(ethylene glycol) (PEG-$SO_{3}$) grafted polyrotaxanes (PRx-PEG-$SO_{3}$) were prepared in order to utilize the unique properties of PEG-$SO_{3}$ and the supramolecular structure of PRx, in which PEG-$SO_{3}$ grafted $\alpha$-cyclodextrins ($\alpha$-CDs) were threaded onto PEG segments in a PEG-b-poly(propylene glycol) (PPG)-b-PEG triblock copolymer (Pluronic) chain capped with bulky end groups. Some of the PRx-PEG-$SO_{3}$ demonstrated a higher anticoagulant activity in case of PRx-PEG-$SO_{3}$ (P 105), and compared with the control they showed a lower fibrinogen adsorption in PRx-PEG-$SO_{3}$ (F68) and a higher binding affinity with fibroblast growth factor. The obtained results suggested that polyrotaxane incorporated with PEG-$SO_{3}$ may be applicable to the surface modification of clinically used polymers, especially for blood/cell compatible medical devices.