• Food Science of Animal Resources
• /
• v.36 no.2
• /
• pp.262-266
• /
• 2016

This study evaluated the growth kinetics of Salmonella spp. in processed meat products formulated with low sodium nitrite (NaNO₂). A 5-strain mixture of Salmonella spp. was inoculated on 25-g samples of sausages formulated with sodium chloride (NaCl) (1.0%, 1.25%, and 1.5%) and NaNO₂ (0 and 10 ppm) followed by aerobic or vacuum storage at 10℃ and 15℃ for up to 816 h or 408 h, respectively. The bacterial cell counts were enumerated on xylose lysine deoxycholate agar, and the modified Gompertz model was fitted to the Salmonella cell counts to calculate the kinetic parameters as a function of NaCl concentration on the growth rate (GR; Log CFU/g/h) and lag phase duration (LPD; h). A linear equation was then fitted to the parameters to evaluate the effect of NaCl concentration on the kinetic parameters. The GR values of Salmonella on sausages were higher (p<0.05) with 10 ppm NaNO₂ concentration than with 0 ppm NaNO₂. The GR values of Salmonella decreased (p<0.05) as NaCl concentration increased, especially at 10℃. This result indicates that 10 ppm NaNO₂ may increase Salmonella growth at low NaCl concentrations, and that NaCl plays an important role in inhibiting Salmonella growth in sausages with low NaNO₂.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.736-741
• /
• 2014

This study developed probabilistic models to determine the initiation time of growth of Pseudomonas spp. in combinations with $NaNO_2$ and NaCl concentrations during storage at different temperatures. The combination of 8 NaCl concentrations (0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, and 1.75%) and 9 $NaNO_2$ concentrations (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm) were prepared in a nutrient broth. The medium was placed in the wells of 96-well microtiter plates, followed by inoculation of a five-strain mixture of Pseudomonas in each well. All microtiter plates were incubated at 4, 7, 10, 12, and $15^{\circ}C$ for 528, 504, 504, 360 and 144 h, respectively. Growth (growth initiation; GI) or no growth was then determined by turbidity every 24 h. These growth response data were analyzed by a logistic regression to produce growth/no growth interface of Pseudomonas spp. and to calculate GI time. NaCl and $NaNO_2$ were significantly effective (p<0.05) on inhibiting Pseudomonas spp. growth when stored at $4-12^{\circ}C$. The developed model showed that at lower NaCl concentration, higher $NaNO_2$ level was required to inhibit Pseudomonas growth at $4-12^{\circ}C$. However, at $15^{\circ}C$, there was no significant effect of NaCl and $NaNO_2$. The model overestimated GI times by $58.2{\pm}17.5$ to $79.4{\pm}11%$. These results indicate that the probabilistic models developed in this study should be useful in calculating the GI times of Pseudomonas spp. in combination with NaCl and $NaNO_2$ concentrations, considering the over-prediction percentage.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.581-587
• /
• 2023

The purpose of this study was to analyze the change trajectory and latent class types of self-esteem in first to fourth grade elementary school students. For the purpose, the Korean Children's Panel data were analyzed using potential growth model and the growth mixture model. As the results, the linear change model was selected as the most appropriate model. The change trajectory was found to increase slightly as the grade increased. In addition, four latent class groups were derived through: 'high level-maintenance,' 'low level-increase,' 'high level-decrease,' and 'low level-maintenance.' Most children were in the 'high level-maintenance' group, followed by 'high level-decrease,' 'low level-increase,' and 'low level-maintenance' groups. Therefore, based on the results of the study, we suggest that educational institutions and local communities pay attention to trends in elementary school students' self-esteem and provide appropriate support for students in each class.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.125-137
• /
• 2009

Acoustic emission-based techniques are being used for the nondestructive inspection of mechanical systems used in service. For reliable fault monitoring related to the crack growth, it is important to identify the dynamical characteristics as well as transient crack-related signals. Widely used methods which are based on physical phenomena of the three damage stages for detecting the crack growth have a problem that crack-related acoustic emission activities overlap in time, therefore it is insufficient to estimate the exact crack growth time. The proposed pattern recognition method uses the dynamical characteristics of acoustic emission as inputs for minimizing false alarms and miss alarms and performs the temporal clustering to estimate the crack growth time accurately. Experimental results show that the proposed method is effective for practical use because of its robustness to changes of acoustic emission caused by changes of pressure levels.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.595-602
• /
• 2005

In order to purify diethylene glycol as main impurity included in p-dioxanone, SLE (solid-liquid equilibria) and mixture density on two components system of p-dioxanone and diethylene glycol were measured and a layered melt crystallization with seed has been applied. The SLE of p-dioxanone and diethylene glycol were a simple eutectic system and the temperature and PDX concentration at eutectic point were 0.08 and 246 K, respectively. Densities of their binary mixtures were well fitted by the best correlation equation, ${\rho}_l=0.405+1.361x+0.002T-0.004xT$. In the melt crystallization, the growth rate (G) was proportional to the 1.5th power of the subcooling degree. The effective distribution coefficient ($K_{eff}$) as the degree of impurity removal was observed to increase with increasing the growth rate and initial p-dioxanone concentration. And also, $K_{eff}$ was correlated with Z function using Wintermantel's model such as $K_{eef}=-0.0604+6.392{\times}Z$. Finally, PDX purity through the optimization of this process can be obtained over 99%.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.399-404
• /
• 2000

The adjuvant effect of a muramyl dipeptide (MDP) derivative, MDP-Lys(L18), on enhancing of antitumor immunity induced by X-irradiated tumor cells against highly metastatic B16-BL6 melanoma cells was examined in mice. Mice immunized intradermally (i.d.) with a mixture of X-irradiated B16-BL6 cells and MDP-Lys (L18) [Vac+MDP-Lys (L18)] followed by an intravenous (i.v.)inoculation of $10^4$ viable tumor cells 7 days after immunization, showed a significant inhibition of experimental lung metastasis of B16-BL6 melanoma cells. The most effective immunization for the prophylactic inhibition of tumor metastasis was obtained from the mixture of $100{\;}\mu\textrm{g}$ of MDP-Lys (L18) and $10^4$ X-irradiatied tumor vaccine. Furthermore, immunization of mice with Vac+MDP-Lys(L18), 3 days after tumor challenge, resulted in a significant inhibition of lung metastasis of B16-BL6 melanoma cells in an experimental lung metastasis model. Similarly, the administration of Vac+MDP-Lys(L18), 1 or 7 days after tumor removal, markedly inhibited tumor metastasis of B16-BL6 in a spontaneous lung metastasis model. When Vac+MDP-Lys (L18) was i.d. administered 3 days after subcutaneous (s.c.) inoculation of tumor cells ($5{\times}10^5/site$) on the back, mice treated with Vac+MDP-Lys(L18) showed inhibition of significantly tumor growth on day 20. These results suggest that MDP-Lys (L18) is able to enhance antitumor activity induced by X-irradiated tumor vaccine to reduce lung metastasis of tumor cells, and is a potent immunomodulating agent which may be applied prophylactically as well as therapeutically to treatment of cancer metastasis.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.139-152
• /
• 2006

Many experimental and numerical approaches have been developed to evaluate paving materials and to predict pavement response and distress. Micromechanical simulation modeling is a technology that can reduce the number of physical tests required in material formulation and design and that can provide more details, e.g., the internal stress and strain state, and energy evolution and dissipation in simulated specimens with realistic microstructural features. A clustered distinct element modeling (DEM) approach was implemented In the two-dimensional particle flow software package (PFC-2D) to study the complex behavior observed in asphalt mixture fracturing. The relationship between continuous and discontinuous material properties was defined based on the potential energy approach. The theoretical relationship was validated with the uniform axial compression and cantilever beam model using two-dimensional plane strain and plane stress models. A bilinear cohesive displacement-softening model was implemented as an intrinsic interface and applied for both homogeneous and heterogeneous fracture modeling in order to simulate behavior in the fracture process zone and to simulate crack propagation. A disk-shaped compact tension test (DC(T)) with heterogeneous microstructure was simulated and compared with the experimental fracture test results to study Mode I fracture. The realistic arbitrary crack propagation including crack deflection, microcracking, crack face sliding, crack branching, and crack tip blunting could be represented in the fracture models. This micromechanical modeling approach represents the early developmental stages towards a 'virtual asphalt laboratory,' where simulations of laboratory tests and eventually field response and distress predictions can be made to enhance our understanding of pavement distress mechanisms, such its thermal fracture, reflective cracking, and fatigue crack growth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.259-264
• /
• 2017

Birth weight of a new born baby provides very important information in evaluating many clinical issues such as fetal growth restriction. This paper analyzes birth weight data of babies born in Korea from 2011 to 2013, and it shows that there is a biologically implausible distribution of birth weights in the data. This implies that some errors may be generated in the data collection process. In particular, this paper analyzes the relationship between gestational period and birth weight, and it is shown that the birth weight data mostly of gestational periods from 28 to 32 weeks have noticeable errors. Therefore, this paper employs the finite Gaussian mixture model to classify the collected data points into two classes: non-corrupted and corrupted. After the classification the paper removes data points that have been predicted to be corrupted. This adjustment scheme provides more natural and medically plausible percentile values of birth weights for all the gestational periods.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.1
• /
• pp.29-36
• /
• 1996

Naengmyon is a Korean buckwheat noodle with chilld broth, and the juice of dongchimi, a Korean radish pickle fermented with wild lactic acid bacteria, has been used as the broth for naengmyon traditionally. The purpose of this study was to demonstrate the inhibitory effect of dongchimi-juice against coliform bacteria in model system of naengmyon-broth. Dongchimi-juice was made from radish juice by the cultivation of lactic acid bacteria which had been isolated from kimchi. Three types of naengmyon-broth, beef-broth type, dongchimi-juice type and the mixed type, were made as model systems, and then the changes in viable cell counts of seven coliform bacteria, Klebsiella planticola Bo2, X. terrigena CO8, K. pneumoniae DOI, K. ozaenae DO4, Enterobacter sp. AO2, Enterobacter sp. CO7, Citrobacter sp. BO7 and Escherichia sp. DO3, which had been added to each type of naengmyon-broth in advance, were investigated during storage at 3$0^{\circ}C$ All coliforms grew rapidly in naengmyon-broth of beef-broth type, while none grew in dongchimi-juice type or in the mixed type. All coliforms died out far more rapidly in dongchimi-juice type than in mixed type. The decreasing slopes of Citrobacter sp. Bo7, K. planticola BO2, X. terrigena CO8 and K. ozaenae DO4 were more steep than those of the rest. It was thought that the preparation method of Korean traditional naengmyon such as dongchimi-naengmyon or Pyongyang style-naengmyon, which uses oxy dongchimi-) juice or the mixture of dongchimi-juice and beef-broth, would be very effective for preventing the growth of coliform bacteria from naengmyon.