• Journal of Life Science
• /
• v.31 no.2
• /
• pp.175-182
• /
• 2021

Saccharomyces lysate has the well-known function of soothing the skin in various ways: it is an anti-irritant and can treat skin care conditions, such as skin whitening and antioxidative activity. However, data on the safety for use of Saccharomyces lysate in cosmetics and skin care products are still limited. To design a new cosmetic material with antioxidant and skin-whitening effects, 80 yeast strains were isolated from berries grown in Sunchang. Among the isolates, the FT4-4 strain, which exhibited superior biological activities, was selected for further experiments. The FT4-4 strain was identified as Saccharomyces cerevisiae by 18S rRNA gene sequencing analysis. S. cerevisiae FT4-4 showed higher DPPH radical-scavenging (51.41%), superoxide dismutase (62.23%), and tyrosinase inhibition (64.75%) activities. The highest yield of biomass (3.16 g/l) and maximum growth rate of S. cerevisiae FT4-4 were observed within 16 h. Furthermore, the cytotoxicity potential of S. cerevisiae FT4-4 on B16F10 melanoma cells was measured by an MTT assay, and the results indicated that S. cerevisiae FT4-4 had a capacity to inhibit melanin up to 72.02% at an initial 10 mg/ml concentration. These results suggest that S. cerevisiae FT4-4 could be a promising candidate as a multi-functional material for application in the cosmetic industry, especially because of its antioxidant and skin-whitening effects.

• Journal of Forest and Environmental Science
• /
• v.37 no.1
• /
• pp.52-61
• /
• 2021

Decay fungi can decompose plant debris to recycle carbon in the ecosystem. Still, they can also be fungal pathogens, which can damage living trees and/or wood material and cause a large amount of timber loss. We isolated and identified basidiomycetous fungi from the decayed bark of Mongolian oak wrapped with sticky roll traps. The degrading enzyme activities were then tested for all fungal isolates. The decay ability of selected isolates was assessed based on the weight loss of wood discs after inoculating with culture suspension of decay fungi under the different humidity levels. A total of 46 basidiomycetous fungal isolates belonged to 12 species, and 10 genera were obtained from Jong Myo (16 isolates), Chang Kyung palace (7 isolates), Cheong Gye (10 isolates), and Gun Po (13 isolates). Gymnopus luxurians was the most dominant fungus in the present study, and this species distributed in all survey sites with 9 isolates in Jong Myo, followed by 3 isolates in Chang Kyung palace, while Cheong Gye and Gun Po had only 1 isolate each. Among 46 isolates, 44 isolates secreted at least one enzyme, while 25 isolates produced both cellulase and phenol oxidase enzymes, and 2 isolates produced neither. The assessment of decay ability by artificial inoculation indicated that the weight loss of wood discs was significantly influenced by humidity conditions when inoculated with bark decay fungi. The percent weight losses by G. luxurians inoculation in RH of 90-100% and RH of 65-75% were 4.61% and 2.45%, respectively. The weight loss caused by Abortiporus biennis were 6.67% and 0.46% in RH of 90-100% and RH of 45-55%, respectively. The humidity reduction approach should be applied for further studies to control the growth and spread of bark decay fungi on the trunks wrapped with sticky roll traps.

• Korean Journal of Legislative Studies
• /
• v.24 no.1
• /
• pp.171-202
• /
• 2018

Issue ownership concerns a party's issue handling reputation. When a party is perceived to have the best solution for an issue, voters identify the party as the owner of the issue. Extant literature of issue ownership voting shows that voters tend to vote for a party that they identify as the owner of an issue they concern most. That is, the effect of issue ownership on voting is conditioned by the perceived salience of the issue in question. This study investigates another condition of issue ownership voting: i.e. party behavior in election campaigns. It argues that the effect of issue ownership on voting is conditional: it depends on party behavior as well as issue salience. During the campaign in the 2016 legislative election, only the Democratic Party of Korea, the opposition party at that time, actively presented itself as the owner of economic issues. The analysis results of this study show that the identification of the Democratic Party as the economic issue owner affects voting for the party when a voter thinks the economy to be the most important issue. However, the identification of the other parties as the economic issue owner does not affect voting for them under the same condition. The results support the argument that party behavior as well as issue salience are conditions of issue ownership voting.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.861-869
• /
• 2018

To determine the origin of the inhomogeneous microstructure and texture observed in drawn and annealed high purity copper wires, two kinds of drawing process conditions and their influence was investigated. The regular condition, based on a symmetric die, and a condition designed intentionally to produce an inhomogeneous shear deformation using an asymmetric die were employed. The difference in intensity of <111>-<100> distributed texture between the two wires confirmed that the wire drawn under the asymmetric die condition experienced a higher amount of shear deformation. The extensive shear strain in the wire drawn under the asymmetric die condition gave rise to inhomogeneous primary and secondary recrystallization behavior. After annealing at $200^{\circ}C$, grains with <100> texture, which were larger than the surrounding recrystallized grains, were extensively present on one half circle of the wire drawn under the asymmetric die condition, while larger grains with <100> were sparsely observed around the middle region of the wire drawn under the regular condition. Interestingly, the area where the larger grains with <100> texture existed was identical to the area where the high shear strain occurred during drawing in both wires. During annealing at $400^{\circ}C$, grains with <112> texture started to grow abnormally at the center of both wires as a result of secondary recrystallization. After annealing at $900^{\circ}C$ grains with <112> due to secondary recrystallization occupied the entire region of the wire drawn under the regular condition. On the other hand, in the wire drawn under the asymmetric die condition and then annealed at $900^{\circ}C$, the <100> oriented grains as a result of the normal grain growth of the larger <100> grains which were observed after annealing at $200^{\circ}C$, coexisted with the abnormally grown <112> grains. These results indicate that dynamic recrystallization induced by the shear strain during drawing plays an important role in the inhomogeneity of the microstructure and texture of wires after annealing.

• Korean Journal of Ecology and Environment
• /
• v.54 no.1
• /
• pp.12-23
• /
• 2021

As fish communities are sensitive to natural environmental changes as well as anthropogenic pressures, their composition and characteristics help us to assess the aquatic ecosystem health. The fish fauna and the length-weight relationship of Zacco platypus in the Seomjin River system were investigated from July 2018 to May 2019. The collected species during the survey period were 49 species belong to 14 families including 19 Korean endemic and two endangered species. According to Bray-Curtis similarities, 14 sites were divided into four groups based on the fish community composition; two groups(group A, B) and two uncategorized sites(group C, D). There were significant differences between groups A and B(analysis of similarities, R=0.722, p=0.002). A similarity percentage analysis revealed that Z. koreanus(8.55%), Micropterus salmoides(6.90%), and Lepomis macrochirus (4.90%) contributed to these differences of fish assemblages between group A and B. Group A showed higher relative abundances of exotic species such as M. salmoides and L. macrochirus, while Z. platypus and Z. koreanus which are the common species in Korea, were the most dominant species in group B. Based on the length-weight relationship of Z. platypus, b values were varied from 2.82 to 3.80, indicating that growth patterns of the species were spatially different. This study could be served as baseline data for understanding fish fauna, assessing habitat characteristics based on the fauna, and identifying health conditions of Z. platypus in the Seomjin River system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.2
• /
• pp.77-83
• /
• 2021

Rye (Secale cereal L.) is the most tolerant to abiotic stress including low temperature, drought, and unfavorable soil conditions among the winter cereals. Rye is the rapid growth of early spring results from increasing areas for the use of the forage and green manure in the middle part of Korea. "Jungmo2509", a rye cultivar was developed by the National Institute of Crop Science (NICS), RDA in 2014. It was developed from a cross between "Olhomil", a self-compatible cultivar, and "Synthetic II", a self-incompatible line. "Jungmo2509" is an erect plant type and of a middle size, with a green leaf color, a yellowish-white colored culm, and a yellowish brown-colored, small-size grain. The heading date of "Jungmo2509" was April 23, which was 5 days later than that of "Gogu", respectively. But "Jungmo2509" showed greater resistance to lodging compared to that of the check cultivar, with similar to winter hardiness, wet injury, and disease resistance. "Jungmo2509" was a higher to than "Gogu" in terms of protein content (9.4% and 8.0%, respectively), total digestible nutrients (TDN) (55.7% and 55%, respectively). The seed productivity of "Jungmo2509" was approximately 2.08 ton 10a-1, which was 11% lower than that of the check. Almost all rye cultivars are out-crossing due to genes controlling incompatibility, but "Jungmo2509" is higher seed fertility (56%) than that of Gogu (0%). it has self-compatible genes. "Jungmo2509" is erect in plant type and resistance for lodging. Therefore, "Jungmo2509" can produce uniform seeds for processed grains of human consumption and utilize them as parents for breeding the rye hybrids with high forage yields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.349-356
• /
• 2021

Since the 1960s, traffic infrastructure, such as bridges, has increased rapidly in Korea as urbanization and industrialization progressed due to economic growth. As the scale of the bridge becomes larger, stability analysis of the superstructure of the bridge is being conducted actively, but scour stability analysis for the substructure of the bridge has not been conducted sufficiently. This study is a basic investigation to prevent large-scale disasters caused by scouring in bridge piers. A simple linear regression model was used to analyze the scour depth calculated through seventeen scour depth calculation formulae, and the scour depth measured through hydraulic model experiments. As a result, the Coleman (1971) formula was the best method among the scour depth calculation formulae, and the Froehlich (1987) formula was the most effective method for calculating the scour depth. In addition, a review using a simple regression model confirmed that the scour depth calculation formulae of CSU (1993), Coleman (1971), and Froehlich (1987) can predict a similar scour depth by reflecting domestic stream characteristics. This study can calculate the scour depth reflecting the environmental conditions of Korea in future stream design.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.441-453
• /
• 2021

Recently, the untact healthcare industry due to COVID-19 has been attracting attention, and the telemedicine industry based on medical information has become a field of the healthcare industry receiving attention. However, in Korea, due to obstacles in the legal system, telemedicine is still illegal between doctors and patients. In the case of neighboring China, the reality is the opposite of the recent rapid growth of the telemedicine industry under the leadership of the government. This study looks at this from the perspective of the industrial innovation system on the grounds that telemedicine is an industry and innovative technology needs to be changed to clarify the difference between domestic and Chinese telemedicine industries. As a result of analyzing China's telemedicine industry on the seven sub-divisions of demand conditions, innovators, networks et al., Such as seizing appropriate opportunities for demand driving effects and appropriate communication between economic actors were identified as major success factors. This researcher proposes the following suggestions. first, it conforms to the current digital New Deal policy flow, and conducts a demand survey on the change in demand for medical services in the 4th Industrial Revolution and the Untact Era. For the introduction, a plan to conduct a demand survey for the public and second, second, a plan to grow and intensively foster digital high-tech medical care as a new industry was suggested.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.68-81
• /
• 2021

The agricultural ecosystem is one of the major sources of greenhouse gas (GHG) emissions. In order to search for climate change adaptation options which mitigate GHG emissions while maintaining crop yield, it is advantageous to integrate multiple models at a high spatial resolution. The objective of this study was to develop a tool to support integrated assessment of climate change impact b y coupling the DSSAT model and the DNDC model. DNDC Regional Input File Tool(DRIFT) was developed to prepare input data for the regional mode of DNDC model using input data and output data of the DSSAT model. In a case study, GHG emissions under the climate change conditions were simulated using the input data prepared b y the DRIFT. The time to prepare the input data was increased b y increasing the number of grid points. Most of the process took a relatively short time, while it took most of the time to convert the daily flood depth data of the DSSAT model to the flood period of the DNDC model. Still, processing a large amount of data would require a long time, which could be reduced by parallelizing some calculation processes. Expanding the DRIFT to other models would help reduce the time required to prepare input data for the models.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.20-27
• /
• 2021

Effects of the etching treatment of SAPO-34 catalyst were investigated to improve the catalytic lifetime in DTO reaction. The aqueous NH3 solution was a more appropriate treatment agent which could control the degree of etching progress, compared to that of using a strong acid (HCl) or alkali (NaOH) solution. Therefore, the effect on characteristics and lifetime of SAPO-34 catalyst was observed using the treatment concentration and time of aqueous NH3 solution as variables. As the treatment concentration or time of aqueous NH3 solution increased, the growth of erosion was proceeded from the center of SAPO-34 crystal plane, and the acid site concentration and strength gradually decreased. Meanwhile, it was found that external surface area and mesopore volume of SAPO-34 catalyst increased at appropriate treatment conditions. When the treatment concentration and time were 0.05 M and 3 h, respectively, the lifetime of the treated SAPO-34 catalyst was the longest, and was significantly enhanced by ca. 36% (based on DME conversion of > 90%) compared to that of using the untreated catalyst. The model for the etching progress of SAPO-34 catalyst in a mild treatment process using aqueous NH3 solution was also proposed.