• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.71-77
• /
• 1998

The root-zone environment is an important factor to the plant growth and it is closely related to the thermal characteristics of the root media. In this study thermal characteristics of root media with ambient environmental conditions were analyzed. The temperatures of nutrient solution as well as inside air of culture bed were measured in Nutrient Film Technique(NFT) and Deep Flow Technique(DFT) systems, and also the temperatures of root media measured in aggregate culture systems , The temperature of nutrient solution of NFT system with as low as 3$\ell$/min of flow rate was 3$^{\circ}C$ higher than that with 5 $\ell$/min of flow rate in the daytime, and the temperature of inside air was 2$^{\circ}C$ higher at night. And the temperature of nutrient solution of DFT system with as low as 0.8 cm of water level was 1-2$^{\circ}C$ higher than that with 1 8 cm in the daytime, and the temperature of inside air was almost same at night. The root-zone temperatures in the perlite and rockwool granulate systems with film mulching were 3$^{\circ}C$ higher than those without film mulching in the daytime. However, the rockwool slab system with film mulching showed the same trend as rockwool granulate system, but relatively higher temperature than any other medium because of the exposure of media surface to the ambient air. Additionally the temperature below the plant was measured 3$^{\circ}C$ lower than that between plants.

• Land and Housing Review
• /
• v.8 no.4
• /
• pp.285-294
• /
• 2017

Recently, as the paradigm of regional development has been transformed into characterization, decentralization and cooperation, small and medium scale development is in the spotlight. In particular, as the transfer of planning authority to local governments accelerates, LH is in the process of seeking to transform itself into a system that is in line with local government demand. The purpose of this study is to elaborate the regional pending projects that meet the demand of the region. The Jeju Special Self-Governing Province is the area where land and housing prices have increased more than three times recently, which is the area of interest in recent years due to the various demand for development projects. Another objective is to establish a local government based on LH's system, it is aimed to derive a collaboration method with local government, province corporation and local researchers. The criteria for deriving the cooperation projects between the local government and LH are basically the ones that can be carried out by LH and future-oriented projects. The process of deriving has undergone the process of statutory planning, unscrupulous plan analysis, and consultation of experts' advisory committees. In order to derive the regional cooperation project, four criteria such as local uniqueness, future possibility, business promotion efficiency, and local cooperation project were set. Major projects of the Jeju Special Self-Governing Province are improvement of the surrounding traffic system, construction of the hinterland due to the construction of the second airport, and establishment of Cruise Port(Jeju Port, Seogwipo Port). The role of each entity in the implementation of regional cooperation projects is as follows. Local government should request subsidies for the projects in case of lack of budget support and secure them through competition with other regions. In addition, it should be responsible for the operation and management of the facility once it has been supported and completed smoothly. The Ministry of Land, Infrastructure and Transport affects each region through approval and subsidy of the development plan. After the development project is completed, it evaluates the development project through monitoring and plays a role of continuously improving the system. As a business operator, the provincial corporation will carry out small-scale projects including non-physical projects such as community participation. In the case of LH regional headquarters, the general manager of the region will establish a comprehensive business plan, secure development availability, and carry out large-scale growth promotion projects.

• The Korean Journal of Mycology
• /
• v.8 no.1
• /
• pp.33-43
• /
• 1980

Thirteen strains or crosses of Lentinus edodes obtained from home and abroad were compared for their mycelial characteristics on artificial media. Eleven of them were selected and inoculated on logs in order to study for their productivity, and the morphological characteristics of the mushrooms were investigated. 1) Seven strains, i. e., 11001, 12001, 13005, 13012, 13015, 12004 and 20101 were grown well on the sawdust medium. 2) The best mycelial growth and establish­ment of infection on logs were obtained from strains 20101 and 11001. 3) The highest yield of the mushrooms on logs during the six year periods were obtained from strains 11001, 12001 and 20101. 4) The highest yield of the mushrooms usually was obtained on the fourth year after inoculation. 5) The fruit body productivity in terms of dry weight recovery was the highest in strains 13005 and 20101. 6) The most productive period of the mushrooms during the years depended on strains. Most prevalent types of the strains were summer and autumn growing types, and more mushrooms were produced during these periods. 7) Morphological characteristics of the mushroom were more or less dependent on environmental conditions. 8) Thicker fruit bodies and relatively uniform shapes of the mushroom were produced by strain 20101.

• Mycobiology
• /
• v.37 no.1
• /
• pp.53-61
• /
• 2009

The process of biodegradation in lingo-cellulosic materials is critically relevant to biospheric carbon. The study of this natural process has largely involved laboratory investigations, focused primarily on the biodegradation and recycling of agricultural by-products, generally using basidiomycetes species. In order to collect super white rot fungi and evaluate its ability to degrade lingo-cellulosic material, 35 fungal strains, collected from forests, humus soil, livestock manure, and dead trees, were screened for enzyme activities and their potential to decolorize the commercially used Poly-R 478 dye. In the laccase enzymatic analysis chemical test, 33 white rot fungi and 2 brown rot fungi were identified. The degradation ability of polycyclic aromatic hydrocarbons (PAHs) according to the utilized environmental conditions was higher in the mushrooms grown in dead trees and fallen leaves than in the mushrooms grown in humus soil and livestock manure. Using Poly-R 478 dye to assess the PAH-degradation activity of the identified strains, four strains, including Agrocybe pediades, were selected. The activities of laccase, MnP, and Lip of the four strains with PAH-degrading ability were highest in Pleurotus incarnates. 87 fungal strains, collected from forests, humus soil, livestock manure, and dead trees, were screened for enzyme activities and their potential to decolorize the commercially used Poly-R 478 dye on solid media. Using Poly-R 478 dye to assess the PAHdegrading activity of the identified strains, it was determined that MKACC 51632 and 52492 strains evidenced superior activity in static and shaken liquid cultures. Subsequent screening on plates containing the polymeric dye poly R-478, the decolorization of which is correlated with lignin degradation, resulted in the selection of a strain of Coriolus versicolor, MKACC52492, for further study, primarily due to its rapid growth rate and profound ability to decolorize poly R-478 on solid media. Considering our findings using Poly-R 478 dye to evaluate the PAH-degrading activity of the identified strains, Coriolus versicolor, MKACC 52492 was selected as a favorable strain. Coriolus versicolor, which was collected from Mt. Yeogi in Suwon, was studied for the production of the lignin-modifying enzymes laccase, manganese-dependent peroxidase (MnP), and lignin peroxidase (LiP).

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.1
• /
• pp.47-53
• /
• 2011

HACCP methodology was applied in the post-harvest processing and storage of domestic medicinal produces. Particularly in terms of mold and mycotoxin contamination, candidate critical control points (CCP) in the conventional practice in Korean farms were selected and monitored by comparing with on the standard guided processing and storage. When each processing of Angelicae Gigantis Radix were assessed for their safety, the drying steps such as the sun drying or the thermal drying depending on each farm made differences in mold contamination. Moreover, the storage conditions before or after the processing were another critical determinant in the fungal contamination. In other words, storage under $4{\circ}C$ rather than at room temperature was favorable for reducing mold growth in the harvested crops. Occurrence rate of Aflatoxin $B_1 \;(AFB_1)$ in Angelicae Gigantis Radix were 12.8%, but amount of $AFB_1$ in all the collected samples were below 10 ppb regulatory limit allowed in Korea. However, for a few samples of Angelicae Gigantis Radix, still relatively high levels of total amount of the major aflatoxins (aflatoxin $B_1\; +\; B_2\; +\; G_1\; +\; G_2$) were observed around 0.18~49.94 ppb, which is not regulated presently in Korea. It thus can be suggested that post-harvest processing and storage of Korean medicinal crops need further investigation and monitoring to establish the Good Agricultural Practice (GAP), particularly to minimize microbial risk including mold and mycotoxin contamination under the changing climate. Additionally, it is also warranted for new enacting of regulatory limits for total aflatoxins in the medicinal crops.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.27-33
• /
• 2001

The growth characteristics of 4-fold grain which was appeared in KLN deposition on $Pt/Ti/SiO_2/Si(100)$ substrate was studied by varying process variables. Substrate temperature, sputtering pressure, rf power were selected as process variables, and experiment was carried out near optimum fabrication condition. When using K and Li enriched target, the optimum fabrication conditions were substrate temperature of $600^{\circ}C$, sputtering pressure of 150mTorr, rf power of 100 W and its surface morphology is sensitively varied by small deposition condition changes. KLN is composed of elements which have large difference of boiling point. And it is difficult to fabricate thin film at high temperature and high vacuum deposition condition. Furthermore the phenomenon during deposition process can not be explained by using Thorton's model which explains the relation between thin film structure and melting point of thin film materials. These phenomenon can be explained using boiling point of elements which consist of thin film material.

• Korean Journal of Microbiology
• /
• v.45 no.2
• /
• pp.193-199
• /
• 2009

A bacterium producing the halotolerant extracellular protease was isolated from squid jeotgal, and was identified as Bacillus sp. SJ-10 based on morphological, physiological and biochemical characteristics, as well as phylogenetic analysis using 16S rRNA gene sequence. The strain grew at $20^{\circ}C\sim55^{\circ}C$, pH 5~8, and 0%~14% NaCl and optimal growth conditions were $35{\pm}5^{\circ}C$, pH 7, and 5% NaCl. The major cellular fatty acids were anteiso-$C_{15:0}$, anteiso-$C_{17:0}$, and $C_{16:0}$ DNA G+C content was 50.58 mol% and menaquinone consisted of MK-7 Phylogenic analysis based on the 16S rRNA gene sequence indicated that SJ-10T belongs to the genus Bacillus. About 40 kDa of the salt-tolerant protease was purified by 40% ammonium sulfate saturation and Mono Q column chromatography. The optimal activity of the protease was pH 8 and stable at pH 5~10. The optimum temperature and NaCl concentration were $35{\pm}5^{\circ}C$ and $5{\pm}1%$, respectively.

• Korean Journal of Microbiology
• /
• v.45 no.2
• /
• pp.228-231
• /
• 2009

We have purified Phytophthora capsici alpha and beta tubulin from Escherchia coli BL21(DE3). The recombinant alpha and beta tubulins were assembled into microtubule in vitro with specific conditions. The metagenome library was isolated from soil in the Mt. Yeo-Ki, Suwon, Korea and manufactured with the method mentioned in experiment contents for in vitro screening of microtubule assembly screening. FRET effect was used for microtubule assembly inhibitor screening with metagenome library. We got 2 metagenome clones from in vitro screening, and these 2 hit clones showed P. capsici growth inhibition activity on the growing pepper plants. These results suggest that new development of potent inhibitor for pepper blight disease and new approach to prevention of pepper blight disease.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.260-266
• /
• 2006

Methanol induction conditions with various additives for the enhanced production of recombinant hepatitis B surface antigen(HBsAg) were investigated in Pichia pastoris, which can utilize methanol as a carbon source and produce recombinant proteins under the control of strong, tightly-regulated alcohol oxidase(AOX) promoter. The presence of non-methanol carbon sources such as glycerol and glucose fully repressed the expression of AOX promoter. Various additives were tested to improve the production of recombinant protein and it was found that sorbitol could be a good carbon source during methanol induction period. An optimized concentration of amino acid mixture enhanced the production of HBsAg significantly. Pluronic F-68, a non-ionic surfactant, also improved the production of HBsAg without inhibiting cell growth. Addition of oleic acid at 0.01%(v/v) during the induction period showed positive effect on the production of HBsAg. Finally, 1.2%(v/v) of trace salts enhanced the production of HBsAg 1.9 times compared to that of control culture.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.46-51
• /
• 2006

As one of the $CO_2$ reduction strategies, a biological method was proposed to convert $CO_2$ to useful biomass with antioxidant carotenoids by photosynthetic microorganisms. One of the photoautotrophs, Haematococcus pluvialis is a freshwater green microalga and accumulates the secondary carotenoid astaxanthin during induction of green vegetative cells to red cyst cells. In this study, $CO_2$ fixation and astaxanthin production using H. pluvialis was conducted by photoautotrophic culture in the $CO_2$ supplemented photo-incubator. Maximum growth rate of H. pluvialis was obtained at a 5％ $CO_2$ environment on basic N and P conditions of NIES-C medium. The photoautotrophic induction consisted of 5％ $CO_2$ supply and high light illumination promoted astaxanthin synthesis in H. pluvialis, yielding an astaxanthin productivity of $9.6mg/L{\cdot}day$ and a $CO_2$ conversion rate of $27.8mg/L{\cdot}day$ to astaxanthin. From the results the sequential photoautotrophic culture and induction process using H. pluvialis is expecting an alternative $CO_2$ reduction technology with a function of valuable biosubstance production.