• 품질경영학회지
• /
• 제32권4호
• /
• pp.265-273
• /
• 2004

We got the growth distance curve by spline smoothing method with observed marketing data and the growth velocity curve by the derivation of the growth distance curve. Using this growth velocity curve, we defined the several characteristic points which describe the variation of marketing data. In this paper, to specify several patterns of marketing data, we suggested characteristic function by using these characteristic points. In addition, we applied characteristic function to the seventeen brands of electric home products data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.261-266
• /
• 2003

The growth behavior of the transverse crack, which was one of the most dangerous damages of rail defects, was investigated under mode I and mixed mode loading in rail steel. In the case of variable amplitude loading, the fatigue crack growth behavior was discussed using characteristic stress intensity factor ranges ${\Delta}_{rms}$. In addition, characteristic comparative stress intensity factor ranges ${\Delta}_{V,rms}$ was proposed to evaluate the quantitative effects of the variable amplitude under mixed mode loading. As a result, crack growth rate under variable amplitude loading was faster than that under constant amplitude loading.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.797-804
• /
• 2001

To obtain representative fatigue crack growth characteristic curve in residual stress field, fatigue crack growth test was carried out at various stress ratio and fatigue crack growth characteristic curve was represented using crack closure concept. Obtained results are as follows;K(sub)op/K(sub)max was independent of K(sub)max when R was lower than 0.5 and crack closure phenomenon was not observed when R is higher than 0.5. therefore neglecting crack closure behaviour, actual fatigue crack growth rate can be underestimated. Thus, considering crack closure phenomenon, fatigue crack growth characteristics curve of A 106 Gr B Steel weldment can be effectively estimated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1040-1043
• /
• 2004

As time goes by, the market demand increases and each LCD panel manufacturing company makes every effort to produce more panels in a limited time. It is necessary to reduce the cost and time of production for the improvement of productivity in manufacturing companies. The increased speed of thin films growth used in the TFT process brings improvement of productivity but it is also accompanied by a drop in display quality due to a characteristic change of the thin film. So in our dissertation, we deal with the increased speed of a-Si layer growth and the proportioned a drop in characteristic quality. We discuss a drop in display quality by a characteristic change of a-Si layer and we propose a counter-plan through panel design improvement. We have already applied our plan to the 15" XGA panel and confirmed the improved result.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1098-1106
• /
• 2018

The object of this study is to clarify fatigue limit and fatigue crack growth characteristic of SBHS700 base metal which is 780 MPa class steel. This study carried out the fatigue tests of SBHS700 base metal containing different defect size, and the fatigue limit was compared with that of the conventional steel. Test results indicate that the fatigue limit increased with decrease initial defect size, and can be precisely evaluated by using ${\sqrt{area}}$ parameter model. This paper also presents that crack growth characteristic was almost the same as that of the conventional steel from the observation of striations by using Scanning electron microscope and length of beach marks.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.88-94
• /
• 2013

As the results of analysis that are applying a heat pump using underground water as heat source of facility horticulture house, temperature change in house, growth of cultivated plants and the crop characteristic, the conclusion can be acquired as follows. It was possible to maintain the chamber temperature through operating heat pump with setting goal temperature at $16^{\circ}C$ and temperature variation at ${\pm}3^{\circ}C$. And cooling and heating coefficient of performance in heat pump system are different from setting room temperature and operation condition of equipment, totally in case that the setting temperature in house is low, the coefficient of performance and the in case that temperature departure is low. In case that the house does not heated, the result of the growth characteristic of cucumber planted last 50days is that cucumber grown in house equipped with heat pump is the most favorable growth characteristic due to maintaining a constant room temperature. After 90 days, the quantity and weight cucumber harvested in each house are averagely 9.8%, 13.1% increase and more heavy weight respectively. So it is researched that crop characteristic is superior.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.54-64
• /
• 1995

The effects of swirl on early flame development and late combustion characteristic were investigated using a high speed single-shot visualized 51 engine. LDV measurements were performed to get better understanding of the flow field in this combustion chamber. Spark plugs were located at half radius (R/2) and central location of bore. High speed schlieren photographs at 20,000 frames/sec were taken to visualize the detailed formation and development of the flame kernel with cylinder pressure measurements. This study showed that high swirl gave favorable effects on combustion-related performances in terms of the maximum cylinder pressure and flame growth rate regardless of spark position. However, at R/2 ignition the low swirl shown desirable effects at low engine speed gave worse performances as engine speed increased than without swirl. There were distinct signs of slow-down in flame growth during the period when the flame front expanded from 2.5mm in radius until it reached 5.0mm apparently due to the presence of ground electrode. There seemed to be heat transfer effect on the flame expansion speed which was evidenced in high swirl case by the slowdown of the late flame front presumably caused by relatively large heat loss from burned gas to wall compared with low- or no-swirl cases.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.407-412
• /
• 2012

This study investigated the process of thermal-induced growth of micro-crack developed at the crystalline solar cell using EL image, determined the output characteristic according to the pattern of micro-crack, analyzed the I-V characteristic according to the pattern of crack growth, and predicted the output value using simulation. The purpose of this study was, therefore, to investigate the process of thermal-induced growth of micro-crack developed at the early stage of PV module completion using EL image, to analyze the resulting decrement of output and predict the output value using simulation. It was observed that the crack grew increasingly by the thermal condition, and accordingly the lowering of output was accelerated. The output values of crack patterns with various direction were predicted using simulation, resulting in close I-V curve with only around 4% of error rate. It is considered that it is possible to predict the electric characteristic of solar cell module using only pattern of micro-crack occurred at solar cell based on our results.

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.51-55
• /
• 2003

The interrelation into nucleation and thermodynamic parameters of solutions has been established by plotting of various dependencies: the enthalpy of dissolution, solubility product and super-solubility on ionic salt radii and also the extent of deviation from an ideal Debye -Huckel model of electrolyte solution on solubility product. The possible methods of perfect crystal growth from aqueous solution have been found a priori by separating of known set of pair values of solubility and super-solubility into no less than six-nine characteristic and distinctive sub-sets.

• 생물환경조절학회지
• /
• 제16권3호
• /
• pp.217-221
• /
• 2007

다양한 활엽수 자원의 개발에 필요한 기초자료를 제공하고자 쪽동백나무 유묘의 생육밀도에 따른 물질생산량과 생장특성 등 최적의 생장조건을 조사하였다. 묘목의 생육밀도는 수고생장에 크게 영향을 미치는 중요한 요인이 될 수 있으며, 본 실험 결과 쪽동백나무의 $1m^2$당 생육 밀도에 따른 묘목의 생장은 49본구에서 간장과 근원직경이 우수한 생장량을 보인반면 생육밀도가 낮은 처리구는 근원직경 생장이 증가하면서 간장생장은 떨어지는 경향을 보였다. 물질생산량 또한 생장 특성과 마찬가지로 $1m^2$당 49본구 처리구에서 전체 물질생산량이 통계적으로 유의적인 차이를 보이면서 $3.12{\pm}0.80g$로 다른 처리구보다 높은 물질생산량을 보였고, T/R율에서도 1.59로 나타났다. 생리적 특성으로 광합성률 또한 쪽동백나무의 경우 $1m^2$당 $49/m^2$ 본구와 $64/m^2$ 본구에서 상대적으로 높은 광합성률을 보였고 밀도가 높아질수록 광합성 효율이 떨어지는 결과를 나타냈다. 이는 생육 환경조건에서 적절한 공간 확보가 궁극적으로 최종 물질대사 작용인 광합성률 변화에서 최적의 상태를 보이면서 생리적으로 안정된 생장형태를 보이는 것으로 판단되며, 적정 공간의 장애가 실질적인 생장저하를 발생시키고, 궁극적으로 물질대사의 최고 단계인 광합성효율 또한 낮아지는 경향을 나타냈다.