• Applied Science and Convergence Technology
• /
• 제24권3호
• /
• pp.67-71
• /
• 2015

InP/InGaP quantum structures (QSs) were grown on GaAs (001) substrates by a migration-enhanced molecular beam epitaxy method. Temperature-dependent photoluminescence (PL) and emission wavelength-dependent time-resolved PL (TRPL) were performed to investigate the optical properties of InP/InGaP QSs as a function of migration enhanced epitaxy (MEE) growth cycles from 2 to 8. One cycle for the growth of InP QS consists of 2-s In and 2-s P supply with an interruption time of 10 s after each source supply. As the MEE growth cycle increases from 2 to 8, the PL peak is redshifted and exhibited different (larger, comparable, or smaller) bandgap shrinkages with increasing temperature compared to that of bulk InP. The PL decay becomes faster with increasing MEE cycles while the PL decay time increases with increasing emission wavelength. These PL and TRPL results are attributed to the different QS density and size/shape caused by the MEE repetition cycles. Therefore, the size and density of InP QSs can be controlled by changing the MEE growth cycles.

• 한국산림과학회지
• /
• 제79권2호
• /
• pp.138-143
• /
• 1990

낙엽송 성숙임분(成熟林分)(1925년(年) 식재(植栽))내(內)에서 해면버섯균(菌)과 꽃송이버섯균(菌)의 자실체(子實體)가 발생(發生)된 부후피해목(腐朽被害木)을 벌채(伐採)하여 심재부후피해(心材腐朽被害)을 조사(調査)하였다. 벌근단면상(伐根斷面上)에 수(髓)를 중심(中心)하여 나타난 부후단면적율(腐朽斷面積率)은 19.2~74.4%, 부후(腐朽)높이는 수고(樹高) 1.2~5.5m, 부후재적율(腐朽材積率)은 2.2~13.4%였고, 심재부(心材部)에 부후(腐朽)가 나타나는 높이까지를 손실재(損失材)로 보면 전체재적(全體材積)의 27.2%(13.1~37.1%)가 부후(腐朽)된 것으로 나타났다. 양균종간(兩菌種間)의 피해(被害)크기 비교(比較)에서는 꽃송이버섯균(菌)에 의(依)한 피해(被害)가 해연버섯균(菌)에 의(依)한 피해(被害)보다 더 심(甚)하였다. 또한 부후재부(腐朽材部)의 압축강도(壓縮强度)($52{\sim}77kg/cm^2$)와 비중(比重)(0.40~0.47)은 건전목(健全木)의 건전재(健全材)에 비(比)하여 각각(各各) 최고(最高) 77% 및 39%가 감소(減少)한 것으로 나타났고, 부후재부(腐朽材部)가 있는 높이까지의 육안건전재부(肉眼健全材部)의 강도(强度)와 비중(比重)도 최고(最高) 42% 및 26%가 감소(減少)한 것으로 나타났다. 한편 부후피해목(腐朽被害木)과 건전목(健全木)의 연년(連年) 생장량(生長量) 비교(比較)에서, 흉고직경(胸高直徑) 생장량(生長量)은 식재(植栽) 8-14년후(年後)부터 재적(材積) 생장량(生長量)은 식재(植材) 12-21년후(年後)부터 건전목(健全木)에 뒤떨어지는 것으로 나타났다.

• 대한수학회논문집
• /
• 제38권3호
• /
• pp.943-966
• /
• 2023

In this paper, we study the initial-boundary value problem for viscoelastic wave equations of Kirchhoff type with Balakrishnan-Taylor damping terms in the presence of the infinite memory and external time-varying delay. For a certain class of relaxation functions and certain initial data, we prove that the decay rate of the solution energy is similar to that of relaxation function which is not necessarily of exponential or polynomial type. Also, we show another stability with g satisfying some general growth at infinity.

• 전기의세계
• /
• 제17권2호
• /
• pp.16-26
• /
• 1968

Cds is possible to add excess donors and to compensate partially using other group metals as acceptors. The impurities can ble incorporated either during crysta growth or by diffusion into a bulkcrystal. The addition of rimpurities leads also to the production of vacancies in a manner depending on the atmosphere surrounding the crystal during growth, during the diffusion process or using bulk. Cds of the mentioned above affects spectral sensitivity, speed of response, the variation on photocurrent, electron life time, and decay of photoconductivity with temperature and with intensity of illumination. In the work to be deseribed, these properties have been studied between liquid nitrogen and room temperature. In addition, the electron trap distribution has been correlated with speed of response, variation of photocurrent with temperature in various atmosphere. Four major trapping levels have been observed, and their identification with impurity and vacancy levels is discussed. And also the effects of lattice imperfections on the photoconductive properties CdS were investigated in detail.

• 대한수학회지
• /
• 제57권6호
• /
• pp.1573-1590
• /
• 2020

In this paper, we classify all solutions bounded from below to uniformly elliptic equations of second order in the form of Lu(x) = a_ij(x)D_iju(x) + b_i(x)D_iu(x) + c(x)u(x) = f(x) or Lu(x) = D_i(a_ij(x)D_ju(x)) + b_i(x)D_iu(x) + c(x)u(x) = f(x) in unbounded cylinders. After establishing that the Aleksandrov maximum principle and boundary Harnack inequality hold for bounded solutions, we show that all solutions bounded from below are linear comb_inations of solutions, which are sums of two special solutions that exponential growth at one end and exponential decay at the another end, and a bounded solution that corresponds to the inhomogeneous term f of the equation.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.75-80
• /
• 2000

Kinetic data for the acid phase anaerobic digestion were presented in this study and the constants were determined with acid production rate and gas production rate. Process models based on continuous culture theory were used to describe the characteristics of the acid forming microorganisms and to enable further development toward utilization of the process in a more rational manner. Acid phase digestion can be separated with appropriate manipulation of hydraulic retention time in anaerobic digestion. Kinetic analysis of data from the various hydraulic retention times using a phase specific model obtained form the acid phase indicated maximum specific growth rate of 0.40/h, saturation constant of 2,000mgCOD.$\ell$, yield coefficient of 0.35 mgVSS/msCOD utilized and decay constant of 0.04/h for the acid production rate. Similar analysis of data for the gas production rate indicated maximum specific growth rate of 0.003/h, saturation constant of 2,200mgCOD/$\ell$, yield coefficient of 0.035 mgVSS/mgCOD utilized and decay constant of 0.06/h.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.92-98
• /
• 1997

To make good use of chitosan forming complex with heavy metals in wood preservative treatment, woods impregnated with chitosan and copper sulfate were prepared. Amounts of leached copper, decay resistance, anti-mold efficacy, iron corrosion rates, moisture regain rates and degradation pattern in chitosan pre-treated and untreated wood were compared. After leaching test, amounts of leached copper from chitosan pre-treated wood had a much smaller than chitosan untreated wood, and good decay resistance was retained even after leaching test. From these results, it was proved that chitosan-copper complex formed in wood played and important role for decay durability. In chitosan pre-treated wood, damage values by test molds became remarkably smaller, but the growth of test molds was not perfectly inhibited. Distinct differences in iron corrosion rates between chitosan pre-treated and untreated woods was not recognized but chitosan pre-treated wood showed the lower moisture regain rates than chitosan untreated wood because of water insoluble chitosan membrane formed in wood. After leaching test, the tracheid walls in the wood treated with 2.0% copper sulfate only were eroded by the fungal attacks, but those in the wood pre-treated with chitosan remained almost intact.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.700-710
• /
• 2008

A Bubble size distribution model has been developed for the numerical simulation of cryogenic high-speed cavitating flow of the turbo-pumps in the liquid fuel rocket engine. The new model is based on the previous one proposed by the authors, in which the bubble number density was solved as a function of bubble size at each grid point of the calculation domain by means of Eulerian framework with respect to the bubble size coordinate. In the previous model, the growth/decay of bubbles due to pressure difference between bubble and liquid was solved exactly based on Rayleigh-Plesset equation. However, the unsteady heat transfer between liquid and bubble, which controls the evaporation/condensation rate, was approximated by a theoretical solution of unsteady heat conduction under a constant temperature difference. In the present study, the unsteady temperature field in the liquid around a bubble is also solved exactly in order to establish an accurate and efficient numerical simulation code for cavitating flows. The growth/decay of a single bubble and growth of bubbles with nucleation were successfully simulated by the proposed model.

• The Plant Pathology Journal
• /
• 제28권1호
• /
• pp.55-59
• /
• 2012

Northern stem canker caused by $Diaporthe$ $phaseolorum$ var. $caulivora$ ($Dpc$) has become a serious disease in soybean. The objectives of this study were to survey the existence of $Dpc$ on soybean in Korea, and to examine the potential pathogenicity of $Dpc$ in seed decay. One such isolate, SSLP-4, isolated from a field-grown plant of the Korean soybean cultivar Danbaekkong, was identified as $Dpc$, based on its morphological and molecular characteristics by sequences of internal transcribed spacer (ITS), translation elongation factor (TEF) 1-${\alpha}$ and ${\beta}$-tubulin regions, as well as pathogenic analyses. Moreover, morphological and molecular analyses revealed that isolate SSLP-4 was nearly identical to $Dpc$ strains from the United States. Pathogenicity tests on hypocotyls of soybean seedlings and detached leaves resulted in typical symptoms of soybean northern stem canker and inoculation on plants at R5-R7 stage caused seed decay. All results suggest that the $Dpc$ strain SSLP-4 can cause both stem canker and seed decay on soybean. Thus, the SSLP-4 isolate has the potential to contribute greatly to understanding of host plant resistance mechanisms, both at vegetative and reproductive growth stages in soybean.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.155-159
• /
• 1997

We investigated the effect of mechanical backside damage in Czochralski silicon wafer. The intensity of mechanical damage were evaluated by minority carrier recombination lifetime by a laser excitation/microwave reflection photoconductance decay method, photo-acoustic displacement method, X-ray section topography, and wet oxidation/preferential etch methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the photoacoustic displacement values are also increased proportionally.