• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.225-226
• /
• 2017

Recently, there has been a growing interest in the development of non-sintered binder to reduce CO2 emissions from the cement clinker manufacturing process and a number of studies have been conducted on fly ashes as an industrial by-product. However, in order to utilize fly ashes as a non-sintered binder, it is necessary to solve problems such as safety issues and economical efficiency due to use of an alkali activator. This study evaluates the material properties and compressive strength characteristics of three types of circulating fluidized bed boiler ashes. As a result, it was confirmed that the characteristics of each binder vary depending on the location of the power plant and the types of raw materials. In addition, it has been confirmed that the fluidized bed boiler ash shows a high compressive strength and can be used sufficiently as an non-sintered binder.

• 한국농공학회논문집
• /
• 제58권5호
• /
• pp.71-79
• /
• 2016

The effects of spot heating for growing the strawberry cultivated in a plastic greenhouse during the winter that were estimated in Nonsan strawberry experiment station located in Chungnam. The temperature of water for heating was controlled by a electric hot water boiler and kept at the range of $22{\sim}24^{\circ}C$. Heating pipes were set up in root zone for root zone heating and very close to crown for crown heating. Spot heating effects were estimated by applying spot heating system in three test factors of heating root zone, crown only and crown plus root zone. The material for crown heating pipe was white low density polyethylene and the nominal diameter of that pipe was 16 mm. The material for root zone heating pipe was flexible stainless steel and the nominal diameter of that pipe was 15A. The flow rate of heating water circulation was 480 L/h and water circulation lasted for all day long. Temperatures, harvest yield by test beds were surveyed from Nov. 10, 2013 to Apr. 29, 2014. The temperature of crown spot for crown heating bed was at the range of $13.0{\sim}17.0^{\circ}C$ during the night and that of crown spot in control bed was at the range of $8.0{\sim}14.0^{\circ}C$. Also, the temperature of root zone for root zone heating bed was at the range of $18{\sim}21.0^{\circ}C$ and that of root zone in control bed was at the range of $13.0{\sim}15.0^{\circ}C$. The cumulative yield growth rate in earlier harvest period (from Dec. 20 to Mar. 15) of crown heating bed was 43% compared with that of control bed and the cumulative yield of crown plus root zone heating bed was 39 % and that of root zone heating bed was 39 %.

• Mycobiology
• /
• 제30권3호
• /
• pp.180-182
• /
• 2002

A fungus that grew over bed-logs of shiitake(Lentinula edodes) and caused damage was isolated from mushroom-growing farms. The fungus produced extensive mat-like dark subiculum with ascomata in it and was identified as Nitschkia confertula. This is the first report in Korea and morphological characteristics are fully described.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.11-19
• /
• 2003

The main purpose of this study was to examine the application of the root system as a shore protection material through the measurement of the 개ot growth curve of Salix gracilisyla Miq. depending on the cutting size. As materials and methodology, nine group of cuttings were classified by the length(l0cm, 20cm, 40cm) and the diameter(0.72cmm$\pm$0,02, 0.58cm$\pm$0.02, 0.35cm$\pm$0.02), Each group was stuck to a flooding bed of sandy loam(Sand 60,36%, Silt 28%, Clay 11.64%) on 27th March 2001, After 65 growing days, the weight and length of the newly developed roots, shoots, and leaves were measured and analysed, This was repeated at 99, 129, 159, and 190 growing days. The major findings were as follows. The primary determinant of the root growth rate was on the weight of cutting, The secondary determinant was on the number of growing days. In addition, the dominant dimension of the cutting was the diameter rather than the length, The thicker cutting caused more rapid and stable growth however the longer cutting made the growth of the root slower and more unstable.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.89-93
• /
• 2015

Purpose: Machine vision-based image processing methods can be useful for estimating the fresh weight of plants. This study analyzes the ability of two different image processing methods, i.e., morphological and pixel-value analysis methods, to measure the fresh weight of lettuce grown in a closed hydroponic system. Methods: Polynomial calibration models are developed to relate the number of pixels in images of leaf areas determined by the image processing methods to actual fresh weights of lettuce measured with a digital scale. The study analyzes the ability of the machine vision- based calibration models to predict the fresh weights of lettuce. Results: The coefficients of determination (> 0.93) and standard error of prediction (SEP) values (< 5 g) generated by the two developed models imply that the image processing methods could accurately estimate the fresh weight of each lettuce plant during its growing stage. Conclusions: The results demonstrate that the growing status of a lettuce plant can be estimated using leaf images and regression equations. This shows that a machine vision system installed on a plant growing bed can potentially be used to determine optimal harvest timings for efficient plant growth management.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제22권3호
• /
• pp.151-156
• /
• 2016

클라우드 컴퓨팅이 주목을 받으며 대규모 스토리지 서버에 대한 필요성이 증대됐고, 그에 따라 소비전력 절감이 중요한 연구 주제로 부상하고 있다. 그러나 산업계에서 운영 중인 대규모 데이터 센터를 실험용으로 구축하는데 물리적 한계가 있기 때문에, 많은 선행 연구가 제안한 에너지 절감 기법들의 효과를 입증하는데 어려움을 겪고 있다. 이에 따라, 본 연구는 산업계에서 운영 중인 오픈소스 기반의 OCP Cold Storage를 소규모 테스트 베드로 구축하고, 이를 활용한 스토리지 서버의 정확한 소비 전력 측정 방안을 제고하였다. 또한, 제안한 테스트베드는 클라우드 응용 플랫폼과의 결합을 통해 쉽게 확장 가능하기 때문에, 저전력 스토리지 서버의 정책 개발 및 성능 평가에 크게 기여할 수 있을 것으로 기대한다.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.81-86
• /
• 2013

Purpose: Recently, domestic and abroad consumption of mushroom has been increasing. Especially, oyster mushroom has been the most consumed product, sharing one third of the mushroom market. The air temperature differences between relative positions of the mushroom farms were needs to be minimal. However, in reality, the air temperature differences ranged from 2 to $5^{\circ}C$. Because of this, the mushrooms are non-uniform growth as well as decrease in both quality and quantity. Although air circulators have been employed by oyster mushroom farms to minimize air temperature differences, no experiments have been performed to illustrate the effect of the air circulators. Methods: This experiment is designed to analyze the effect of the air circulation by constructing a prototype air circulator and measuring the air temperature when the circulator was position at different heights (50 cm, 150 cm, 200 cm) from the floor in the center. Result: The horizontal plane air temperature of the first growing bed when the air circulator was installed 50cm above the floor in the center, once not using the air circulators and the other time using the air circulators, yielded the air temperature differences of $8.6^{\circ}C$ and $1.8^{\circ}C$ and deviations of 2.82 and 0.60, respectively. The third growing bed's air temperature differences were $10.0^{\circ}C$, $1.6^{\circ}C$ and deviations 3.28, 0.64, each respectively. These outcomes proved that the use of air circulators minimized the air temperature difference and deviation. The use of air circulators helped minimize the air temperature differences and the derivations in oyster mushroom farm. Conclusion: The use of air circulators helped balance the air temperature distribution in oyster mushroom farm.

• 대한물리의학회지
• /
• 제8권3호
• /
• pp.443-448
• /
• 2013

PURPOSE: In recent years, senior friendly device is growing rapidly because of population aging The study was designed to investigate the effects of table height of electronic bed on upper extremity and trunk EMG in elderly. METHODS: Thirty right-handed elderly without history of neurological and musculoskeletal dysfunction were participated in this study. Three heights of the table (3/3 height, 2/3 height, and 1/3 height between top of the shoulder and olecranon) were provided. During the eating performance, surface electromyography (EMG) was used to measure muscle activity, and electrodes were attached to the deltoid middle fiber, serratus anterior, suprapinatus, upper trapezius, rhomboideus, cervical part of longissimus, thoracic part of longissimus, lumbar part of longissimus on right. One way ANOVA was conducted for the statistical analysis. RESULTS: There were significant differences in deltoid middle fiber, suprapinatus, upper trapezius, rhomboideus, lumbar part of longissimus in the 3 different height of table (p<.05). The deltoid middle fiber, suprapinatus, upper trapezius, and lumbar part of longissimus were significantly increased in higher table than lower table(p<.05). And the rhomboideus was significantly decreased in higher table than lower table(p<.05). CONCLUSION: This study demonstrates that different height of table affect upper extremity and trunk muscle activity. The table height of olecranon is the best for elderly.

• 한국주거학회논문집
• /
• 제16권2호
• /
• pp.91-98
• /
• 2005

The purpose of this study was to explore behaviors of spatial usages such as patterns of spatial usages, perception on residential spaces, and furniture arrangement. A questionnaire survey and interview were adopted in this study, and 146 residents living in apartment with 3 bedrooms, stairway access, and 3-bay style in the City of Gwangju. The major findings of this study were that 1) dining-kitchen (DK) was conceived and used as a space not only for dining but also family gathering and guest reception. Dining table without refrigerator was frequently found in furniture arrangement of DK, and refrigerator has been relocated in utility room facing DK. The results imply the need for social interaction that has been growing. Anbang (master bedroom) has been perceived and used as couples' private area, aside from the traditional function of family interaction. A coordination of both bed and wardrobe out of different furniture arrangements was popular in anbang. Living room was used as a multi-purpose room carrying out various activities such as family gathering, guest reception, and housekeeping. Sofa and cabinet were the most common furniture arrangement in living room. The research results are a basis for development residential open housing system.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1335-1339
• /
• 2004

A hydro-geomorphologic change in a sand bed channel reach and vegetation expansion by changes in the How regime is analyzed in this study. Field and aerial photo surveys, basic hydrological analysis about flow regime change due to two dams, Andong Dam and Imha Dam, on the upstream river and computer modeling are conducted. Two Dams in the study reach have obviously affected downstream channel in many ways including the bed particle coarsening, vegetation expansion on the sandbars and following river channel braiding. The phenomenon of no vegetation on the large point bar in front of Hahwe Village seems due to disturbance of the sandbar surface probably due to the cross flow in the meander reach during the flood. Another reason for no vegetation is that the sandbar on this reach has lower subsurface water lovels, as compared with the others in the up- and downstream of the reach where vegetation expanded, which would hinder vegetation from germinating and growing on the sandbar.