• Journal of Microbiology and Biotechnology
• /
• v.24 no.4
• /
• pp.556-562
• /
• 2014

The occurrence of human norovirus (NoV) genogroup I (GI) and genogroup II (GII) strains was investigated in Korea. Between 2007 and 2010, 265 samples were collected from 89 Korean water source locations. NoV GI was detected in 4.5% and NoV GII in 1.5%. Samples collected in winter had the highest occurrence; 9.4% for NoV GI and 6.3% for NoV GII. NoV GI detection was highest in groundwater, with the next highest in river water and the lowest in lake water (5.9%, 5.4%, and 1.6%, respectively), and NoV GII was found only in river water. When three representative Korean basin systems (Han (H)-, Geum/Seom (G/S)-, and Nakdong (N)-river basins) were compared, both NoV genogroups were high in the G/S-, but absent in the H- river basin. The most prevalent genotypes within the GI and GII groups were GI.5 and GII.4, respectively. The NoVs found in surface water were identical to those found in patients and those found in groundwater. The NoVs appeared to be transmitted from the patient to the surface water, and then to the groundwater, suggesting a fecal-oral route of transmission. This is the first nationwide surveillance of NoV in major Korean water sources.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1475-1486
• /
• 2008

Bentonite-based grouting has been popularly used to seal a borehole installed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because its high swelling potential. However, if the bentonite-based grouting is conducted in coastal areas, the salinity of groundwater changes in the mineral fabric of bentontie. In order words, an increase of cation concentration in groundwater leads to a reduction in the diffuse double-layer thickness in the bentonite mineral structure, and thus the volume of bentointe-based grouts will decrease proportional to the salinity of groundwater. In this paper, the effect of salinity (i.e., NaCl 0.5M, 0.25M, and 0.1M) on the change of swelling potential for bentonite-based grouts has been quantitatively evaluated for seven bentonite grouts from different product sources. In addition, in case of using addictives such as a silica sand to increase the thermal conductivity of bentonite-based grouts, the possibility of particle segregation has been studied considering the viscosity of grouts and salinity of groundwater.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.379-394
• /
• 2002

This study was initiated to identify groundwater quality and contamination at present in the 'A' section of Seoul Metropolitan Subway. Groundwater samples were collected at 21 boreholes along the 'A' section and appeared to show mainly $Ca-HCO_3$ type. In 20 samples, concentration of $SO_4$, Cd, Pb, Fe, Mn, Al, F and $NO_3-N$ were higher than those of Korean drinking water quality standards. From chemical data and saturation Indices, contaminant sources of individual chemical elements were inferred to be buried wastes and surface sediments over the study area. The result of factor analysis suggested that the pollution factor should account for about 47% of data variation.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.25-37
• /
• 2014

The volcanic type of geothermal water is linked intimately to active or potentially active volcanoes and takes place near the plate boundaries. In contrast to the volcanic type, the geothermal water in Korea has a non-volcanic origin. Korea's geothermal water is classified into the residual magma (RM) type and deep groundwater (DG) type according to the criterion of $35^{\circ}C$. This study reviewed the relationship between the physical and chemical features of the 281 geothermal water sources in South Korea in terms of the specific capacity, water temperature, and chemical compositions of two different basements (igneous rock and metamorphic rock) as well as the geological structures. According to the spatial relationship between the geothermal holes and geological faults, the length of the major fault is considered a key parameter determining the movement to a deeper place and the temperature of geothermal water. A negligible relationship between the specific capacity (Q/s) and temperature was found for both the RM type and DG type with the greater specific capacities of the RM- and DG-igneous types than the RM- and DG-metamorphic types. No relationship was observed between Q/s and the chemical constituents ($K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$, $Zn^{2+}$, $Cl^-$, $SO_4{^{2-}}$, $HCO_3{^-}$, and $SiO_2$) in the DG-igneous and DG-metamorphic types. Furthermore, weak relationship between temperature and chemical constituents was found for both the RM type and DG type.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.6
• /
• pp.1-17
• /
• 2021

Self-potential (SP) surveys measure naturally occurring differences in electrical potential in the absence of artificial sources and have been applied to various fields since the first application in mineral explorations. Among various causes of SP occurrences, streaming potential is generated by the flow of groundwater, and makes SP surveys suitable for the exploration of groundwater table fluctuation, fractures, sinkholes and landslide occurrences. Recently, there has been many studies that applied SP surveys to monitor water leakage through dikes and embankments. In this review paper, we first review the characteristics and theoretical backgrounds of streaming potential in saturated or unsaturated porous media to introduce it in the embankment among various application field. After the review of the background theory, we review the past cases of field SP surveys on dikes and embankments and also the characteristics of field streaming potential data in the surveys. Further, by analyzing past studies of qualitative as well as quantitative interpretation of SP survey data, we show the possibility of quantitative interpretation of streaming potential data obtained on dikes and embankments. Consequently, it is hope that this review paper helps researches on SP surveys on dikes and embankments, and provides basis for interpretation methods of the SP data to identify leaked area and further leakage rate (or permeability).

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.217-234
• /
• 2009

This study characterized groundwater quality and the influence of agrochemicals in a part of Ilgwang-Myeon agricultural area in Gijang-Gun, Busan Metropolitan City, using factor analyses. From the 1st, 2nd, and 3rd analyses of groundwater samples, the mean concentrations of $Ca^{2+}$, $Na^+$, $Mg^{2+}$, $K^+$, $Zn^{2+}$, $Cu^{2+}$, $Fe^{2+}$, $Al^{3+}$, $NO_3\;^-$, $Cl^-$, $SO_4\;^{2-}$, $F^-$, and $SiO_2$ were higher in the 2nd analysis than the other analyses. Pesticide carbofuran and herbicide alachlor were detected at the wells more than a half of all the wells in the 2nd analysis but not in the 4th analysis. This fact may be explained by that a higher precipitation induced higher infiltration rate of contaminants into groundwater during the 2nd survey. According to R- and Q-mode factor analyses, and chemical composition, inorganic constituents excepting $SiO_2$, $HC0_3\;^-$-, and $F^-$ may be influenced by anthropogenic sources (manures, synthetic fertilizers, and domestic wastes), seawater as well as water-mineral interaction. A typical indicator of groundwater contamination, nitrate, exceeds around 4-5 times over the Korean standard for drinking water. Additionally, the influence of seawater diminishes from the seaside to inland.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.4
• /
• pp.48-59
• /
• 2018

Beryllium (Be), cobalt (Co), thallium (Tl) and vanadium (V) are candidates of 21 priority soil pollutants in Korea. The distribution of their concentration in soils from three contamination sources including industrial, roadside and mining areas was investigated. Concentrations of the metals were evaluated quantitatively using pollution indices and the fractionation of metals was conducted using modified SM&T (Standards Measurements and Testing programme) sequential extraction. Concentrations of the metals for all samples from industrial and roadside soils were within the range of natural background levels, while some of Be in soils from abandoned mines exceeded that the range. Enrichment Factor (EF) and Nemerow Integrated Pollution Index (NIPI) for Be, Co, Tl and V showed that there are effects or possibilities of anthropogenic activities. Pollution Load Index (PLI) analyses indicated all investigated sites needed further monitoring. The results of sequential extractions indicated mobile fractions (F1+F2) of Be, Tl and V were below 30% except some of Co in soil, which implies their low mobility to neighboring environment media. Variable tools like sequential extraction, comparison with background/actual concentration and pollution indices, as well as aqua regia extraction should be considered when evaluating Be, Co, Tl, V in soil.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.27-27
• /
• 2003

Lake Texoma is located on the border of southern Oklahoma and northern Texas. It has 93,000 surface acres, and is a focus of the recreation, and farming industries in the region. There are potential stressors around the Lake Texoma watershed that may cause adverse ecological effects in the lake. System assimilative capacity (SAC) is the ability of abiotic and biotic processes to atteuniate the stressors. SAC Exceeded indicates potential of occuring adverse eco-effects. A number of representative chemical release sites and stressor sources in the surrounding watershed were characterized, and several impact sites having stressors sources, such as being near agriculture, landfills, housing areas, oil production fields and heavy use recreational activity, were selected for surface water, sediment, and groundwater monitoring. A paired reference site, having similar physical characteristics as its impact site, was also chosen based on its proximity to the impact site. Lake water samples were collected at locations identified as marina entrance, gasoline filling station, and boat dock at five marinas selected on Lake Texoma from September 1999 to December 2001. Paired water and sediment samples were also collected. Groundwater samples were collected at about 70 producing monitoring wells. Water quality parameters measured were inorganics (nitrate, nitrite, orthophosphate, ammonia, sulfate, and chloride), dissolved methane, total organic carbon (TOC) (or DOC), volatile organic compounds (VOCs) such as methyl tert-butyl ether (MTBE) and BTEX, and a suite of metals. Biotic communities were evaluated at impact and reference sites. Five basic components were measured; two terrestirial components (plants and bird comminitires) and three aquatic components (benthic inverbrates, litteral-zone fishes, ecosystem attribures). Potential impacts to these comminites were evaluated.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.34-50
• /
• 2022

Principal component analysis (PCA) was conducted using hydrochemical data in four testbeds (A to D) built for the development of site characterization technologies to assess the hydrochemical processes controlling the hydrochemistry in each site. The PCA results indicated the nitrogen loading to deep bedrock aquifers through permeable fractures in Testbed A, the chemical weathering enhanced with the biodegradation of petroleum hydrocarbons in Testbed B, the reductive dechlorination in Testbed C, and the different hydrochemistry depending on the depth to bedrock in Testbed D, consistent with the characteristics of each site. In Testbeds B and D, outliers seemed to affect the PCA result probably due to the small number of samples, whereas the PCA result was still consistent with site characteristics. This study result indicates that the PCA is widely applicable to hydrochemical data for the assessment of major hydrochemical processes in contamination sites, which is useful for site characterization when combined with other site characterization technologies, e.g., geological survey, geophysical investigation, borehole logging. It is suggested that PCA is applied in contaminated sites to interpret hydrochemical data not only for the distribution of contamination levels but also for the assessment of major hydrochemical processes and contamination sources.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.59-71
• /
• 2014

We investigated soil contamination depending on the land use by examining the contamination levels and distribution characteristics of 16 polycyclic aromatic hydrocarbons (PAHs) in the national soil. Total PAHs (the sum of 16 PAH concentrations) and carcinogenic PAHs (the sum of seven carcinogenic PAH concentrations) were $8.50{\sim}3,437.16{\mu}g/kg$ and $2.94{\sim}2,136.96{\mu}g/kg$, respectively. The concentration of benzo(a)pyrene, one of the contaminants regulated by the soil quality standard in the nation, was $ND{\sim}924.73{\mu}g/kg$. Its maximum value of $924.73{\mu}g/kg$ was detected in railroad (Region 3) and is approximately 13% of the standard value for Region 3 (i.e., 7 mg/kg). We also investigated the characteristics of contamination sources of PAHs in soil of the upland, forests, roads, and railroads, examining the fraction distribution of PAHs concentration by the number of benzene rings against the total PAHs concentration. The results demonstrate that the mean fraction of 4~6-ring PAHs against total PAHs concentration in soil was in the range of 51.8~80.7% with relative abundance of high-molecular PAHs, showing that the origin of contamination is under the category of combustion sources. When the molecular indices (Flu/(Flu/Pyr), Ant/(Ant+Phe), InP/(InP+BP), and BaA/(BaA+Chr)) were applied, they were also categorized as petroleum-based combustion sources. The individual PAH concentrations in soil by the land use were grouped into Regions 1, 2, and 3, which are statistically treated and are the parts of the national category system of soil quality standard. As a result, the concentration level of 16 PAHs was $0.02{\sim}2.63{\mu}g/kg$ in Region 1, $0.05{\sim}4.26{\mu}g/kg$ in Region 2, and $2.36{\sim}178.27{\mu}g/kg$ in Region 3. The concentration level of 6 carcinogenic PAHs was 14.2~320.4% against that of benzo(a)pyrene in Region 3 and sites of recycling waste sleepers. Considering that there were similarities among PAHs in terms of structures and toxicities, it would be recommended to review other types of carcinogenic PAHs together with benzo(a)pyrene when developing the soil quality standards in the nation.