• 한국소음진동공학회논문집
• /
• 제12권3호
• /
• pp.236-242
• /
• 2002

This paper presents some advanced and supplemental methods to enhance the accuracy In case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verity the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at tile twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30 m from the center of near side lane.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.441-447
• /
• 2002

KSR-III(Korea Sounding Rocket - III), which is being developed by Space Technology R&D Division of KARI(Korea Aerospace Research Institute) will be launched in late 2002. It is a three-stage, liquid propellant rocket which can reach 250 km altitude and will carry out observation of ozone layer and scientific experiments, such as microgravity experiment, and atmospheric measurement. KSR-III is believed to be an intermediate to the launch vehicle capable of carrying a satellite to its orbit. Space Test Department of KARI performed GVT(Ground Vibration Test) fer KSR-III EM at Rocket Test Building of KARI. GVT is very important for predicting the behavior of rocket in its operation, developing flight control program and performing aerodynamic analysis. This paper gives an introduction of rocket GVT configuration and information on test procedures, techniques and results of It. In this test. to simulate free-free condition, test object hung in the air laterally by 4 bungee cords specially devised. For the excitation of test object, pure random signal by two electromagnetic shakers was used and total 22 frequency response functions were achieved. Polyreference parameter estimation was performed to identify the modal parameters with MIMO(Multi-Input-Multi-Output) method. As the result of the test, low frequency mode shapes and modal parameters below 60Hz were identified

• 한국지반환경공학회 논문집
• /
• 제11권6호
• /
• pp.21-29
• /
• 2010

본 논문에서는 소음과 진동이 거의 없고 환경친화적 공법으로 기대되는 무소음 무진동을 위한 스크류콘크리트말뚝공법을 소개하였고, 기존 PHC말뚝과 스크류콘크리트말뚝에 대하여 수치해석을 실시하였다. 그 결과 각 말뚝의 지지력 및 침하량 거동을 분석하였고 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.42-47
• /
• 2014

In this paper, fatigue life analysis of each structure was performed through theoretical analysis method at design stage in order to verify the success or failure of the store's acoustic noise durability according to the Method 515.5 standard of MIL-STD-810F. In addition, experimental analysis was carried out through the ground and flight test by manufacturing the measuring store, and verification of the sound durability was completed through the flight test after manufacture of the actual store. Furthermore, the commercial FEM code through the PSD calculation method applying measured SPL enables verify the durability of new store components development for the future.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.369-374
• /
• 2016

냉각탑은 옥탑이나 건물 외부에 설치하여, 실내의 온도제어를 위해 사용된다. 냉각탑의 운전시 모터, 팬 및 낙하되는 냉각수에서 발생되는 소음 진동은 주변으로 전파가 용이하여, 인접한 건물 내부의 소음 진동 문제를 야기할 수 있다. 본 논문은 공장에 인접해 위치한 산업용 냉각탑의 진동 소음을 측정하여, 공장 내부의 정밀장비에 미치는 영향을 평가하였다. 정상 운전조건에서의 냉각탑의 소음을 측정하고, 냉각탑에서 일정거리 떨어진 공장의 바닥과 공장 내부에 위치한 정밀장비를 대상으로 진동을 측정하여, 냉각탑과 정밀기계의 진동 소음 평가기준에 의해 냉각탑의 진동 소음이 정밀장비의 정밀도에 미치는 영향을 분석하였다. 측정결과 냉각탑의 소음은 동일 용량 냉각탑의 기준 소음치인 68dB(A)보다 4~9dB(A) 높다. 냉각탑의 진동이 정밀장비에 미치는 영향은 냉각탑이 위치하는 건물 지지 프레임의 진동이 정밀장비가 위치한 바닥의 진동보다 낮아 영향은 미미하다. 정밀장비가 위치한 실내 바닥은 진폭은 허용기준치 안에 들어가나 진동 가속도 레벨 기준으로는 높게 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.960-963
• /
• 2007

In this paper, development of the noise barrier analysis program is described. The upper part of barriers may have complicated shapes like "Y", "T", inverted L, and other shapes. The insertion loss of the barrier is predicted by summation of multiple diffractions occurring at top edge points. In addition, the program considers diffractions occurring at both vertical sides, while reflections from ground due to mirror images are also included. In case of two barriers at both sides of the road, reflections from the other side of barriers are considered, in which magnitudes are decreased by the ratio of absorption coefficient.

• 화약ㆍ발파
• /
• 제23권3호
• /
• pp.19-25
• /
• 2005

본 연구에서는 이완식 발파공법과 건교부 제시 발파공법을 적용한 현장에서 지반진동과 소음을 측정, 분석하고 비교하였다. 건교부 방식 발파에 비해 이완식 발파공법이 다소간 진동감쇠 효과가 있었다 발파매트를 사용한 이완식 발파시험 견과가 건교부 방식 발파에 비하여 소음이 감쇠되는 것으로 나타났으며, 파쇄입도는 다소 떨어졌다.

• 소음진동
• /
• 제8권4호
• /
• pp.690-699
• /
• 1998

This paper discusses the techniques, procedures and the results of the ground vibration test(GVT) performed on the development aircraft and the simple procedure of FE model updating technique from the GVT results. The GVT was carried out using random excitation technique with MIMO(Multi-Input-Multi-Output) data acquistion method, and taking full advantage of poly-reference global parameter estimation technique to identify the vibration modes. In dynamic FE modeling, the aircraft was represented by beam elements and all dynamic analysis was performed using MSC/NASTRAN for this model. In updating procedure, the stiffness of the beam model was adjusted iteratively so as to get the natural frequencies and mode shapes close to the GVT results.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.425-432
• /
• 2009

Recently, reduction of road traffic noise in residential buildings has become one of the most important subjects. To reduce the road traffic noise, noise impact assessment by the road traffic prediction model is required before building construction. For reasonable road traffic noise prediction, it is required to analysis of various factors in road traffic prediction models. This paper was studied the road traffic noise propagation factors such as distance from road to building, receiver height, alignment angle of building and reflection coefficient of the building facade by two calculation models, RLS-90 and CRTN. The result showed that noise reduction was generally higher at bottom stories by ground absorption effect. The reflection coefficient of the building facade was affect of additional sound pressure level by facade reflecting. And alignment angle of building at $90^{\circ}$ was performed effective noise reduction better than $0^{\circ}$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.775-780
• /
• 2011

This paper represents the study on the development of semi-active bicycle suspension system. The road vibration and transmissibility of front suspension are obtained by driving test on proving ground. The numerical simulation is evaluated by dynamic system modeling and equation of motion. The numerical simulation are performed to estimate the optimal damping force for minimal vibration transmission. And oscillating displacement is calculated and analyzed. Therefore the stoke which convert the damping characteristics is suggested from the driving test and numerical simulation.