• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4165-4170
• /
• 2012

In this paper, a method for the improvement in the gain and bandwidth of a microstrip-fed broadband planar quasi-Yagi antenna (QYA) is studied. The broadband characteristics of the QYA are achieved from the coplanar strip-fed planar dipole driver and a parasitic director close to the driver. In order to obtain stable gain variation over the required frequency band, a director and a ground reflector are appended to the driver having a nearby parasitic director. The QYA is fed through an integrated balun composed of a microstrip line and a slot line which are terminated in a short circuit. By adjusting the feeding point, a broadband impedance matching is obtained. A QYA with an operating frequency band of 1.75-2.7 GHz and a gain > 4.5 dBi is designed and fabricated on an FR4 substrate with dielectric constant of 4.4 and thickness of 1.6mm. The experimental results show that the fabricated antenna has good performance such as a broad bandwidth of 59.7%(1.55-2.87 GHz), a stable gain between 4.7-6.5 dBi, and a front-to-back ratio > 10 dB. The measured data agree well with the simulation, which validates this study.

• Research in Plant Disease
• /
• v.20 no.4
• /
• pp.307-313
• /
• 2014

In May 2013, an angel's trumpet leaves showing mosaic and malformation symptoms were collected from Suwon city, Gyeonggi-do. An analysis of the collected sample by transmission electron microscopy observation showed filamentous rod particles of 720-800 nm in length. On the basis of the these observations, we performed PCR against three reported Potyviruses (Brugmansia mosaic virus, Colombian datura virus and Brugmansia suaveolens mottle virus), and the sample was positive for BruMV. Pathogenicity and host range test of BruMV was determined by mechanical inoculation. Solanaceae (tobacco, tomato and eggplant) and Amaranthaceae (ground cherry) appeared typical virus symptoms. To determine coat protein of this virus, we designed specific primer pairs, and performed PCR amplification, cloning, and sequencing. Phylogenetic analysis showed that BruMV-SW was most closely related to BruMV isolate SK. Comparison of the BruMV-SW coat protein nucleotide sequences showed 92% to 99% identities to the other BruMV isolates.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.25-34
• /
• 2001

/sup 226/Ra and /sup 228/Ra analysis were carried out at the representative station of Masan Bay from May to August, 1999. The high activities of /sup 226/Ra and /sup 228/Ra in the surface water were appeared in rainy season (August, 1). However, there is no significant variation in concentrations in the other season. A high negative linear correlation between /sup 226/Ra activities and salinity in the surface water suggests that /sup 226/Ra activity in the surface water was controlled by simple mixing between the two end-members low salinity high /sup 226/Ra activity water of inner Bay and a high salinity low /sup 226/Ra activity water of the continental shelf water out of Bay. /sup 226/Ra activities below the surface mixed layer were higher than those of expected level from the /sup 226/Ra versus salinity. And also /sup 228/Ra//sup 226/Ra ratios in the bottom water were lower compared to those in surface water due to the presence of potential source of /sup 226/Ra below the surface mixed layer. However, it is known that /sup 228/Ra compared to /sup 226/Ra is enriched in bottom sediments and pure water. Therefore, the most probable sources for low /sup 228/Ra//sup 226/Ra activity ration is submarine ground water discharge. Further studies are required to quantify the various sources of /sup 226/Ra and /sup 228/Ra and their relative contributions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2983-2988
• /
• 2010

The train control system used in Gyeongbu-line is classified in ATC, IXL and CTC. Domestic railway signaling systems are being developed by electrification. In these systems the electrification of interlocking reaches 57% and the safety equipments of railway crossings in trackside devices have completed their development into an integrated system. Block systems of all the existing sections have not yet electrified and integrated so that they need a number of complement in terms of construction and maintenance. For ABS currently used in existing domestic lines, and LEU being installed in Gyeongbu and Honam lines, although a train is controlled by the signaling information of the same train in the same location, the system is separately installed so that the same information is separately divided and transmitted at the each distinct system. Therefore, in the conventional ABS and LEU, there are a lot of duplicate installed compartments such as lamp detection and a power supply unit. Hence, we have a lot of problems: for maintenance, a lot of manpower and costs need to be invested and the overall manufacturing costs get higher, as well as the construction costs by duplicate. Therefore, this paper suggest design to develop an integrated electronic Block Control Unit by the integration of the currently used ABS, and communication and electronic technology. We are to monitor and manage the block systems in the corresponding station by integrating. And we are to transmit information together with LEU, which is an ATS wayside transmitter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.604-609
• /
• 2016

This study evaluated the long-term performance of RSR (Reinforced Subgrade for Railways) technology which increases the railway line capacity without the need for additional land. Its characteristics include the use of a short reinforcement with rigid wall, which make it possible to apply it in confined spaces. The 7m high and 40m long testbed employed to evaluate the long-term performance was designed and constructed near Jupo station on the Chang-hang line. This line, located close to a local bus route, had collapsed at the subgrade following heavy rainfall. The performance of the new type of subgrade was verified with long term measurements over a 2 year period including the surface and ground settlement, horizontal displacement of the wall, tensile strain of the reinforcement, and settlement of the rail top on the side track. Based on the results of the measurements made until now, we concluded that it had sufficient safety and serviceability for use as a railway subgrade. It is expected that RSR technology could be frequently used at sites which lack the necessary construction materials for an embankment and are located close to functional railway lines and boundaries, in order to settle civil complaints.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.229-246
• /
• 2011

This study was performed to know and compare the community structures of macrobenthic invertebrates of eight fishing grounds in the coastal waters of Jeju Island from September to October 2008. A total of 166 species was identified. Mollusks comprised 77 species (46.4%); Arthropods 24 (14.5%), Cnidarians 18 (10.8%); Poriferans 16 (9.6%); and the others including Echinoderms 33 (17.7%). Density and biomass were estimated to be 6,905 ind./$m^2$ and 113,100.7 gwwt/$m^2$, respectively. Gastropods was the most dominant taxon in terms of abundance (3,311 ind./$m^2$) and number of species as well, and Gastropods was predominant in biomass (55,789.2 gwwt/$m^2$). The dominant species were Omphalius pfeifferi, Astralium haematragum, Turbo cornutus, Ergalatax contraacta, Lithophaga cura, Anthocidaris crassispina, Herdmania monus in 5-15 m. Based on the cluster analysis, the study area could be divided into two station groups. The biodiversity, evenness and richness index appeared as follows: H' = 1.59-2.95, E' = 0.38-0.87, R = 3.3-10.4. The dominance index were highest in Daepo and lowest in Woljeong.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.191-199
• /
• 2015

We conducted this research to observe the changes of surface morphology and composition of clay minerals influenced by various concentrations of fluoric acid. Hydrofluoric acid (HA), a solution of hydrogen fluoride (HF) in water, is a colourless solution that is highly corrosive, capable of dissolving many materials, especially oxides. To do this, we treated several concentrations of HA on the ground soil samples collected from the agricultural experimental station located at Chungnam National University to observe the influence of fluoric acid on the changes of surface structures and elemental composition of clay particles. Generally, microscopic examination showed that the HA can not only attack an edge of clay particles but also start at any point where structural defects and weaknesses predisposed sites to acid. The orderly flake arrangement of clay minerals may reflect certain crystal symmetry elements. The ESEM-EDS results of element composition of clay particles influenced by HA indicated the changes of structures of clay minerals. It is also clear from the formation of etch figures and element composition of clay particles that the product layer at least partially dissolved or disintegrated in the presence of acid. Conclusively, the clay structures can be strongly influenced by concentrations of HA, resulting in changes of physical and chemical properties that can determine the behavior of solute transport as well as mobility of ions in soils.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.3
• /
• pp.37-47
• /
• 2017

The geotechnical characteristics of frozen ground is one of the key design issues for the construction of infrastructure in cold region. In this study, the dynamic properties (shear modulus and damping ratio) of frozen and unfrozen soils sampled from Terra Nova Bay located in eastern Antarctica, where Jang Bogo station was built, were investigated using Stokoe-type resonant column test (RC). In order to freeze the reconstituted soil specimen, the RC testing equipment was modified by adding a cooling system. A series of resonant column tests were performed in frozen and unfrozen soils with various soil densities and temperatures. The shear modulus (G) and damping ratio (D) of soil frozen at $-7^{\circ}C$ were compared with those of unfrozen soil. In addition, the effect of temperature rise on the maximum shear modulus ($G_{max}$) and damping ratio was experimentally investigated. This study has significance in that the difference of dynamic soil properties between frozen and unfrozen soils and the effect of temperature rise on frozen soil were identified.

• Publications of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.11-16
• /
• 2015

First light galaxies have predictable linear clustering, and are expected to produce fluctuations with a characteristic spatial power spectrum, which peaks at an angular scale of ~ 10 arcminutes and in the $1-2{\mu}m$ spectral regions. The Cosmic Infrared Background ExpeRiment 2 (CIBER2) is a dedicated sounding rocket mission for measuring the fluctuations in the extragalactic infrared background light, following up the previous successful measurements of CIBER1. With a 28.5 cm telescope accompanied with three arms of camera barrels and a dual broadband filter on each H2RG (${\lambda}_c=2.5{\mu}m$) array, CIBER2 can measure 6 bands of wide field ($1.1{\times}2.2$ degrees) up to 3 AB magnitudes deeper than CIBER1. This project is leaded by California Institute of Technology/Jet Propulsion Laboratory, collaborating internationally with Institute of Space and Astronautical Science in Japan, Korea Astronomy and Space Science Institute, Korea Basic Science Institute, and Seoul National University. The Korean team is in charge of 1) one H2RG scientific array, 2) ground station hardware and software, 3) telescope lenses, and 4) flight and test bed electronics fabrication. In this paper, we describe the detailed activities of the Korean participation as well as the current status of the CIBER2 project.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.784-793
• /
• 2017

A two-axis gimbal-type X-band antenna mounted on an observation satellite can efficiently transmit high-capacity image data to a ground station regardless of both the satellite position and the orbital motion. However, this X-band antenna induces unnecessary micro-jitter which can degrade the image quality of the high-resolution observation satellite. Therefore, to achieve the high-resolution image quality from the observation satellite, micro-jitters have been required to be isolated. In this study, to resolve aforementioned drawback, we proposed blade gear using a shape memory alloy (SMA) applied to azimuth stage of X-band antenna. To investigate the rotational basic characteristics of the proposed SMA blade gear, we performed rotational static loading test. Futhermore, to evaluate the cycle to failure of the gear, accelerated life test was conducted. The temperature test was conducted to confirm rotational basic characteristics at various temperature conditions. To verify the isolation performance for micro-jitter, we performed micro-jitter measurement test.