• Title/Summary/Keyword: ground loss

Search Result 865, Processing Time 0.037 seconds

Properties of Ground Solidification Materials using Vietnam CFBC Fly Ash (베트남 CFBC 플라이애시를 사용한 지반고화재의 특성)

  • Kim, Keeseok;Lee, Jaewon;Lee, Dongwon;Yu, Jihyung;Hoang, Truong Xuan;Minh, Ha;Min, Kyongnam
    • Resources Recycling
    • /
    • v.27 no.3
    • /
    • pp.39-47
    • /
    • 2018
  • According to Vietnam government establishes additional coal-fired power plants to secure generation capacity, emission of ashes is accelerating and processing them is urgent issue. This study targeted utilize fly ashes that occurred in circulating fluidized bed combusion (CFBC) power plant to use ground solidification materials. CFBC fly ashes are used to make solidification with ground granulated blast furnace slag (GGBFS), gypsum and cement. Then produced specimens by mixing with soft ground soil to confirm mixing effect of fly ash in solidification. As a result it was possible to find mixture design that is satisfied 3 MPa compressive strength in age 28 days and reduce weight loss rate over 50% in acid immersion test than plain specimens that using only ordinary portland cement.

A Study on the Correlation between Underwater Noise and Ground Vibration (지반진동과 수중소음의 상관성 연구)

  • Park, Jung-Bong;Kang, Choo-Won;Lee, Chang-Won
    • Explosives and Blasting
    • /
    • v.31 no.1
    • /
    • pp.11-22
    • /
    • 2013
  • This study compared and analysed ground vibration, size of underwater background noise in fish farms and underwater object noise of blasting and obtained ground vibration prediction equation through a regression analysis and correlation equation between underwater object noises in order to predict degrees of underwater noise in blasting and organize underwater noise control regulations. Before the study, when background noise of fish and shellfish farms with different conditions was measured, levels of background noise were different according to environmental characteristics of each farm. Ground vibration which causes underwater noise was measured to obtain a correlation equation between ground vibration and underwater object noise. Therefore, if underwater noise is predicted for each construction with a use of a correlation and permissible standards appropriate for each condition are applied for design and construction, financial loss from damages to fish and shellfish caused by development of insufficient technological and engineering logic can be prevented and successful construction with safety of underwater creatures guaranteed can be achieved.

Elucidation of Antioxidant Activity of Phosvitin Extracted from Egg Yolk using Ground Meat

  • Jung, Samooel;Jo, Cheo-Run;Kang, Min-Gu;Ahn, Dong-Uk;Nam, Ki-Chang
    • Food Science of Animal Resources
    • /
    • v.32 no.2
    • /
    • pp.162-167
    • /
    • 2012
  • Phosvitin was extracted from a chicken egg yolk and the iron-binding, along with antioxidative activity of the extracted phosvitin, was determined after mixing with ground beef at the concentrations of 100 and 500 mg/kg of meat. The electrophoretic pattern of the extracted phosvitin on SDS-PAGE was found to be identical to that of the standard phosvitin. The extracted phosvitin at $1,000{\mu}g$/mL showed an ability to bind approximately 65% of the iron in a 3 mM iron solution. Lipid oxidation was inhibited in the ground beef mixed with 500 mg/kg of the extracted phosvitin, during storage at $4^{\circ}C$ compared to that of the control (p<0.05). Additionally, color stability of ground beef containing the extracted phosvitin was enhanced (p<0.05). The pH, cooking loss, texture, and sensory properties of the ground beef were not affected, by adding up to 500 mg/kg of the extracted phosvitin. This result suggests that the phosvitin extracted from egg yolk could be used as an antioxidant reagent. In particular, phosvitin would be more amenable for use in meat products because it is a natural protein derived from animal products.

Filed Applicability Evaluations of Restoration Material for Underground Cavities Formed by Ground Subsidence (지반침하로 인한 지하공동 복구재료의 현장적용성 평가)

  • Bang, Seongtaek;Baek, Seungju
    • Journal of the Korean GEO-environmental Society
    • /
    • v.21 no.3
    • /
    • pp.5-11
    • /
    • 2020
  • Recently, ground pits that have been occurring frequently in urban areas are hindering traffic flow and causing property damages and loss of human life, acting as factors that are threatening the safety of citizens. Therefore, sunken ground must be quickly restored and provisions must be made for additional damage but current domestic detailed standards regarding ground pits and accurate definitions regarding causes and measures to be taken for reoccurrences are lacking. Restoration methods of sunken ground include backfilling by reusing sunken soil or other fill material and paving the road and while this is the most often used method, this only prevents ground from sinking temporarily and can not serve as a fundamental solution. Also, additional ground pits can occur on ground that is reinforced using this method due to faulty backfill material or faulty hardening. This study used Eco-friendly High-Strength Material (EHSM) as restoration material that can be used in the restoration of underground cavities that have occurred due to ground subsidence to analyze the engineered characteristics of modified dredging clay and test pieces made from changed ratios of EHSM and weathered granite soil were uniaxial compression tests were conducted and freezing-thawing tests were conducted to study strength properties according to environmental changes of restoration material, and after tests were concluded by each level, uniaxial compression tests and dynamic elasticity tests were conducted for intensity analysis. Also, to evaluate strength characteristics of the restored ground, dynamic plate load tests were conducted to verify the improvement effectiveness of the restored ground.

Changes in the Quality of Ground Pork Loin Adding Olive and Soybean Oil During Cold Storage (올리브유 및 대두유를 첨가한 돼지등심 분쇄육의 냉장 중 품질변화)

  • Park, Kyung-Sook;Lee, Kyung-Soo;Youn, Dong-Hwa;Moon, Yoon-Hee;Park, Hyun-Suk;Jung, In-Chul
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.36 no.7
    • /
    • pp.896-901
    • /
    • 2007
  • This study was carried out to investigate the effect of the addition of olive and soybean oil on the color, water holding capacity, cooking loss, increase rate of thickness, decrease rate of diameter, pH, VBN content and TBARS value of ground pork loin during cold storage for 15 days. Ground pork loin were prepared by three types such as ground pork loin containing 20% pork fat (GP-P), ground pork loin containing 20% olive oil (GP-O) and ground pork loin containing 20% soybean oil (GP-S). The $L^{\ast}$ (lightness) and $b^{\ast}$ (yellowness) value of GP-P, GP-O and GP-S were not significantly different during storage, and the $L^{\ast}$, $a^{\ast}$ and $b^{\ast}$ value of GP-P were higher than those of GP-O and GP-S (p<0.05). The water holding capacity tended to increase along with storage period, the water holding capacity of GP-P was higher than that of GP-O and GP-S. Also, the cooking loss of GP-P was lower than that of GP-O and GP-S (p<0.05). The increase rate of thickeness by cooking increased along with storage period, but the decrease rate of diameter was tend to decreased with increase in storage period (p<0.05). The pH of all ground pork loins decreased until storage at 5 days, but increased at 15 days (p<0.05). The VBN content of all ground pork loins increased along with storage period, and the VBN content of GP-P was higher than that of GP-O and GP-S (p<0.05). The TBARS value of all ground pork loins increased along with storage period; also, the VBN content of GP-P was the highest among all ground pork loins and GP-O was the lowest among all ground pork loins (p<0.05).

High performance couplers using micromachined transmission lines in millimeter-wave band (마이크로 머시닝 기술을 이용한 밀리미터파 대역 저 손실 결합기에 관한 연구)

  • Lim, Byeong-Ok;Kim, Sung-Chan;Baek, Tae-Jong;Shin, Dong-Hoon;Rhee, Jin-Koo
    • Proceedings of the IEEK Conference
    • /
    • 2005.11a
    • /
    • pp.925-928
    • /
    • 2005
  • In this study, we fabricated the DAMLs using surface micromachining technology as well a low loss coupler for the millimeter-wave band applications using these DAMLs. The structure of DAML is that a signal line is supported on ground plane by dielectric posts. Therefore it has advantages about the loss characteristic and the stable structure. The other advantage of the DAML process is a simple and convenient technique using 4 mask steps, even if it has a micromachining technology. The lowest loss of the fabricated DAML was obtained 2.2 dB/cm at 110 GHz. To obtain the low loss characteristic, couplers were designed and fabricated by using DAMLs. The fabricated ring hybrid coupler has the coupling of 3.58 dB and the thru of 3.31 dB at 60 GHz. We can also obtain the coupling of 3.42 dB, the thru of 3.82 dB from fabricated branch line coupler at 60 GHz.

  • PDF

A Study of Shield TBM Tunnelling-induced Volume Loss Estimation Considering Shield Machine Configurations and Driving Data (쉴드 TBM의 장비 형상 및 굴진 데이터를 고려한 체적손실 산정 연구)

  • Park, Hyunku;Chang, Seokbue;Lee, Seungbok
    • Tunnel and Underground Space
    • /
    • v.25 no.5
    • /
    • pp.397-407
    • /
    • 2015
  • Estimation of shield TBM tunnelling-induced volume loss is of great importance for ground settlement control. This study proposed a simple method for evaluation of volume loss during TBM tunnlling, which is able to take into account of shield machine configurations and main driving data in calculation. The method was applied to analyze the tunnelling cases with earth pressure balanced and slurry pressure balanced shiled TBM, and mostly, reasonable agreements with monitoring results were found. Additional discussions were made for some disagreements.

Design of a Interdigital Microstrip Bandpass Filter (깍지낀 마이크로스트립 대역통과 여파기 설계)

  • 신진옥;전성근;이문수
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.3
    • /
    • pp.565-573
    • /
    • 2000
  • In this paper, a interdigital microstrip bandpass filter is designed. A interdigital microstrip bandpass filter has many advantages such as insertion return loss, lower return loss, higher frequency selectivity and smaller in size in comparison with the conventional coupled line filter. A interdigital microstrip bandpass filter consists of quasi TEM-mode strip line resonators between parallel ground plant. Each resonator element is a quarter wavelength long of the center frequency and is short circuited at one end and open circuited at the other end. In the filter design, Ensemble software is used. Experimental results show that the bandwidth of interdigital microstrip bandpass filter is 2.52GHz, insertion loss is -1.8dB and return loss is -17.0dB at 11.20Hz.

  • PDF

Improving the Performance of Multi-Hop Wireless Networks by Selective Transmission Power Control

  • Kim, Tae-Hoon;Tipper, David;Krishnamurthy, Prashant
    • Journal of information and communication convergence engineering
    • /
    • v.13 no.1
    • /
    • pp.7-14
    • /
    • 2015
  • In a multi-hop wireless network, connectivity is determined by the link that is established by the receiving signal strength computed by subtracting the path loss from the transmission power. Two path loss models are commonly used in research, namely two-ray ground and shadow fading, which determine the receiving signal strength and affect the link quality. Link quality is one of the key factors that affect network performance. In general, network performance improves with better link quality in a wireless network. In this study, we measure the network connectivity and performance in a shadow fading path loss model, and our observation shows that both are severely degraded in this path loss model. To improve network performance, we propose power control schemes utilizing link quality to identify the set of nodes required to adjust the transmission power in order to improve the network throughput in both homogeneous and heterogeneous multi-hop wireless networks. Numerical studies to evaluate the proposed schemes are presented and compared.

Pullout Characteristics of MC Anchor in Shale Layer (셰일지반에 설치된 MC앵커의 인발특성)

  • Lee, Bongjik;Kim, Josoon;Lee, Jongkyu
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.1
    • /
    • pp.53-61
    • /
    • 2012
  • In this study, the research on MC anchor has been developed as composite type has done. MC anchor exerts bearing pressure on pre-bored hole where the end fixing device is expanded. Therefore, the uplift capacity is to be increased and it has the characteristics that the anchor body is not eliminated from the ground even if the grouting is not carried out properly. Furthermore, it reduces the loss of tension and raises the construction availability by inserting the reinforced bar as well as the anchor cable, while it can improve the long-term stability because the nail is expected to play the role when the loss of the anchor cable is occurred in a long-term. However, because the resistance mechanism of the compound anchor such as MC anchor is different from friction anchor, the estimation method of the uplift capacity by the frictional force of the ground and the grout is not proper. Particularly, in domestic cases, the problem to overestimate or underestimate the uplift capacity is expected because the design method considering the soil characteristics about the compound anchor has not been developed. Therefore, in this study, in order to evaluate the characteristics of MC anchor and a kind of compound anchor, we measured the uplift, the tension and the creep by nine anchors tests in shale ground that the fluctuation of the strength is great. In addition, we analyzed the test result comparing to the result of the general friction anchor and evaluated the characteristics of MC anchor movement to gather the results. As a result of the test, we found the effect that the uplift capacity is increased in shale ground comparing to the general friction anchor.