• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.256-267
• /
• 2015

Grid-connected transformerless photovoltaic (PV) inverters (TPVIs) are increasingly dominating the market due to their higher efficiency, lower cost, lighter weight, and reduced size when compared to their transformer based counterparts. However, due to the lack of galvanic isolation in the low voltage grid interconnections of these inverters, the PV systems become vulnerable to leakage currents flowing through the grounded star point of the distribution transformer, the earth, and the distributed parasitic capacitance of the PV modules. These leakage currents are prohibitive, since they constitute an issue for safety, reliability, protection coordination, electromagnetic compatibility, and module lifetime. This paper investigates a wide range of multi-kW range power rating TPVI topologies and classifies them in terms of their leakage current attributes. This systematic classification places most topologies under a small number of classes with basic leakage current attributes. Thus, understanding and evaluating these topologies becomes an easy task. In addition, based on these observations, new topologies with reduced leakage current characteristics are proposed in this paper. Furthermore, the important efficiency and cost determining characteristics of converters are studied to allow design engineers to include cost and efficiency as deciding factors in selecting a converter topology for PV applications.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.335-336
• /
• 2014

This paper investigates the design of coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -1, i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 0.5. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one. Coupled inductors having optimal coupling factor can minimize the ripple current of inductor and battery current resulting in a reliable and efficient operation of battery chargers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.1001-1006
• /
• 2012

This paper presents a carbon nanotube (CNT) triode-structure field emitter as an ion source in a micro time-of-flight mass spectrometer(TOF-MS). In the ion source by field emission, the electrons emitted from cathodes under an electric field accelerated to the anode and ionize gas molecules by impact before arriving the anode. The generated positive ions are to be accelerated to the ion collector. Whereas most of ions are drawn to the cathodes in diode field emitters, a grid in the triode field emitter prevents the ions from being drawn to the cathodes. The triode field emitter is fabricated by micromachining. The cathode is composed of six CNT cylinders. The total size of the fabricated device is $8.0{\times}7.3{\times}1.9mm^3$. The anode and the grid current of the fabricated CNT field emitter were measured for various anode and grid voltages. When the anode and the grid voltages are 1000 V and 990 V, respectively, the emission current passing through the ionization region is 8.6 ${\mu}A$, which is a sufficient emission current for ionization and mass spectrometry.

• The KIPS Transactions:PartA
• /
• v.8A no.3
• /
• pp.269-278
• /
• 2001

Routing region modeling method of auto_routing systems are use the grid and the non-grid type. Though grid type has a few electrical and physical element on PCB, grid type has disadvantage which decrease the auto-routing speed dur to constraint with board and gird size. Thus it increase the memory capacity, Non-grid type(Shape baed type) use the region processing type, so it has 44.2% memory decrease effect than grid type in routing region. Thus, via number has 55% decrease effect, total routing time is increased 83.8% than conventional PCB system. In this paper we developed high speed PCB auto-routing system without memory waste by using shaped type applicant with auction algorithm which reaching the destination from one-point with best speed and solving the path problem. Also, this system developed by Visual C++ in IBM Pentium computer Window environment, and compatible with other PC.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.390-398
• /
• 2006

The objective of the High Energy Physics(HEP) is to understand the basic properties of elementary particles and their interactions. The CMS(Compact Muon Solenoid) experiment at CERN which will produce a few PetaByte of data and the size of collaboration is around 2000 physicists. We cannot process the amount of data by current concept of computing. Therefore, an area of High Energy Physics uses a concept of Tier and Data Grid. We also apply Data Grid to current High Energy Physics experiments. In this paper, we report High Energy Physics Data Grid System as an application of Grid.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.99-105
• /
• 2019

Unlike typical a dynamic positioning (DP) system, a DP-assisted mooring system must determine a set point (SP) that can ensure a mooring tension safety range to prevent an excessive increase in mooring tension. In this paper, a new algorithm for determining the SP is suggested in order to reduce the tension on all the mooring lines. To determine the SP, a working area around the vessel is represented by a rectangular grid. Thus, the size of the grid area is limited considering the offset of a vessel with a mooring system. At each grid's nodes, the resultant tension from all the mooring lines is estimated using the time history of the tension and vessel's position. The results of static analyses for each grid position are used to estimate the global tension. Consequently, the SP is automatically selected as a position satisfying criterion for minimizing the total tension. In order to validate the suggested algorithm, a motion simulation with the control system in the time domain and a discussion of the results are presented.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.169-180
• /
• 2019

Shorelines should be extracted with consistency because they are the reference for determining the shape of a country. Even in the same area, inconsistent minimum vertex intervals cause inconsistencies in the coastline length, making it difficult to acquire reliable primary data for national policy decisions. As the shoreline length cannot be calculated consistently for shorelines produced by determining the arbitrary distance between points below 1m, a methodology to calculate consistent shoreline length using the minimum vertex interval is proposed herein. To compare our results with the shoreline length published by KHOA(Korea Hydrographic and Oceanographic Agency) and analyze the change in shoreline length according to the minimum vertex interval, target sites was selected and the grid overlap of the shoreline was determined. Based on the comparison results, minimum grid sizes and the minimum vertex interval can be determined by deriving a polynomial function that estimates minimum grid sizes for determining consistent shoreline lengths. By comparing public shoreline lengths with generalized shoreline lengths using various grid sizes and by analyzing the characteristics of the shoreline according to vertex intervals, the minimum vertex intervals required to achieve consistent shoreline lengths could be estimated. We suggest that the minimum vertex interval methodology by quantitative evaluation of the determined grid size may be useful in calculating consistent shoreline lengths. The proposed method by minimum vertex interval determination can help derive consistent shoreline lengths and increase the reliability of national shorelines.

• Journal of architectural history
• /
• v.27 no.6
• /
• pp.7-18
• /
• 2018

The purpose of this paper is to analyze the double stylobate of the three-story stone pagoda in Yeongnam region and to divide the types of arrangements of the body-stone and roof-stone and find their correlation. Research objects are 47 three-story stone pagodas in Yeongnam region which have accurate documents and plans. After dividing a double stylobate of three-story stone pagodas into a lower and upper stylobate, we classified each stylobate into a type of body-stone and roof-stone from an architectural point of view. Types of arrangement of body-stones are divided into methods of using the 'ㅡ' shaped stone and methods of using 'ㄱ' shaped stone in the corner. And types of arrangement of roof-stones are divided into methods of arranging stones in a row or in a grid pattern. As the size of the pagoda increases, 'ㄱ' shaped stones used for the body-stone and stones for the roof-stone are arranged in a grid pattern. As the size of the pagoda becomes smaller, the body-stone is consist of 'ㅡ' shaped stone, and the roof-stone is arranged in a row. As the construction year of the pagoda becomes later, the size of the pagoda becomes smaller and types of body-stone and roof-stone had been stereotyped. As a result, the size of the stone pagoda became smaller as constructed later, and the type of body-stone and roof-stone of the double stylobate appear differently according to the size of the pagoda.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1067-1073
• /
• 2021

Participants in the virtual environment will have an immersive and memorable perceived experience through interacting with virtual objects. Recently, commercial virtual reality technologies have released simple and cost-effective smartphone-based head-mounted displays (HMD) and high-quality wide field-of-view (FOV) HMDs. However, due to the vergence-accommodation conflict structure of HMD and the learned cognition mechanism in real, side effects such as dizziness and nausea remain challenging to overcome. This study focuses on consistent size perception among various cognitive difference factors, which are essential for interaction with virtual objects. We verified whether the visual angle, which affects the size perception of an object in real, is also the main factor in the virtual environment. Our experiments derived the relation between the visual angle and the environmental components, shadow, and grid, which help perceive a virtual object. As a result of the regression analysis, we presented that in the small FOV HMD environment, the visual angle affects size perception, and the relation between the shadow and the grid is statistically significant.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.31-40
• /
• 2015

The purpose of this paper is to propose a data transformation method for visualizing the statistical information based on the grid system which has regular shape and size. Grid is better solution than administrator boundary or census block to check the distribution of the statistical information and be able to use as a spatial unit on the map flexibly. On the other hand, we need the additional process to convert the various statistical information to grid if we use the current method which is areal interpolation. Therefore, this paper proposes the 3 steps to convert the various statistical information to grid. 1)Geocoding the statistical information, 2)Converting the spatial information through the defining the spatial relationship, 3)Attribute transformation considering the data scale measurement. This method applies to the population density of Seoul to convert to the grid. Especially, spatial autocorrelation is performed to check the consistency of grid display if the reference data is different for same statistic information. As a result, both distribution of grid are similar to each other when the population density data which is represented by census block and building is converted to grid. Through the result of implementation, it is demonstrated to be able to perform the consistent data conversion based on the proposed method.