• 제목/요약/키워드: green mold

검색결과 142건 처리시간 0.021초

사형(砂型)의 열전달(熱傳達)에 관(關)한 연구(硏究) (A Study on Heat Transfer in Sand Molds)

  • 이종남;김광배
    • 한국주조공학회지
    • /
    • 제2권1호
    • /
    • pp.2-11
    • /
    • 1982
  • In order to investigate the relationship between the thermal characteristics of the various molds as green sand mold, dry sand mold, $CO_2$ mold and shell mold, and the solidification characteristics of molten metal, the thermal analysis of rarious molds and melt were performed. The structure of Al-Castings was a/so observed. Results obtained in this experiment were as follows : 1) The heating rate of the molds was increased in the order of green sand mold, $CO_2$ mold, dry sand mold and shell mold, On the other hand the solidification time of the melts was shortened in the order of dry sand mold castings, $CO_2$ mold castings, green sand mold castings and shell mold castings. 2) The arrest temperature period in the heating curve of the green sand mold was resulted from the eraporation of moisture contained in mold, which was transfered to the outer side of the mold. 3) The temperature fluctuation of the melt in the shell mold was considered to be resulted from the combution heat of resin contained in the mold. 4) The amounts of heat absorption of the molds were increased in the order of dry sand mold, $CO_2$ mold, green sand mold and shell mold. 5) The higher the solidification rate was, the longer was its shrinkage pipe and the finer its grain size.

  • PDF

느타리버섯 푸른곰팡이병에 대한 Thiabendazole의 방제효과 (Effects of Thiabendazole on Green Mold, Trichoderma spp. during Cultivation of Oyster Mushroom, Pleurotus spp.)

  • 전창성;유창현;차동열;김광포
    • 한국균학회지
    • /
    • 18권2호
    • /
    • pp.89-96
    • /
    • 1990
  • Thiabendazole이 느타리버섯 재배에서 발생하는 푸른곰광이병에 방제약제로서의 가능성을 조사한바 다음과 같은 결론을 얻었다. 1. 한천배지상에서 원제농도가 50ppm 처리구에서는 ASI 2001, 2072, 2016, 100 ppm에서는 ASI 2018, 500 ppm에서는 ASI 2070호가 균사생장이 억제되었다. 2. 볏짚의 침수시 처리된 약제의 농도 중 0.2g/1000ml 이상의 처리구에서 느타리버섯 균사생장이 억제되기 시작하였다. 3. 공시약제의 모든 처리는 푸른곰광이 병원균의 처리구와 푸른곰팡이 병원균과 느타리버섯균의 혼합처리구에서도 컬럼의 하단부에 푸른곰장이병의 발생을 발견할 수 없었다. 4. 살균 전 균상표면에 약제를 농도별로 표면살포한 결과 방제효과는 $2g/m^2$$5g/m^2$의 처리구에서 병해가 발생하지 않았으며, 수량성은 $5g/m^2$ 처리구에서 가장 수량이 높았다.

  • PDF

Suppression of Green and Blue Mold in Postharvest Mandarin Fruit by Treatment of Pantoea agglomerans 59-4

  • Yu, Sang-Mi;Kim, Yong-Ki;Nam, Hyo-Song;Lee, Young-Kee;Lee, Seung-Don;Lee, Kui-Jae;Lee, Yong-Hoon
    • The Plant Pathology Journal
    • /
    • 제26권4호
    • /
    • pp.353-359
    • /
    • 2010
  • In order to control postharvest spoilage of satsuma mandarin fruits, rhizobacteria were isolated from soil samples. The Pantoea agglomerans strain 59-4 (Pa 59-4) which suppresses the decay of mandarin fruit by green and blue mold, was tested for the control efficacy and its mode of action was investigated. Pa 59-4 inhibited infection by green and blue mold on wounded mandarins, which were artificially inoculated with a spore suspension of Penicillium digitatum and P. italicum with control efficacies of 85-90% and 75-80%, respectively. The biocontrol efficacy was increased by raising the concentration of cells to between $10^8$ and $10^9\;cfu/ml$, and pretreatment with the antagonist prevented subsequent infection by green mold. The population of Pa 59-4 was increased more than 10 fold during the 24 hr incubation at $20^{\circ}C$, indicating that colonization of the wound site might prevent the infection by green mold. Despite poor antifungal activity, the Pa 59-4 isolate completely inhibited the germination and growth of P. digitatum spores at $1{\times}10^8\;cfu/ml$. We argue that the control efficacy was mediated by nutrient competition. Overall, the effective rhizobacterium, Pa 59-4, was shown to be a promising biocontrol agent for the postharvest spoilage of mandarin fruits by green and blue mold.

톨라신류 펩티드 혼합처리에 의한 항진균 활성의 증가 (Increase in antifungal activity by the combination of tolaasin and its analogue peptides)

  • 윤영배;이형진;김영기
    • Journal of Applied Biological Chemistry
    • /
    • 제61권1호
    • /
    • pp.69-73
    • /
    • 2018
  • 표고버섯(Lentinus edodes)은 원목이나 톱밥배지를 사용하여 재배한다. 이 배지에 푸른곰팡이(Trichoderma)가 감염되면 표고버섯의 생장을 크게 억제한다. 버섯은 신선식품이기 때문에 푸른곰팡이를 방제하기 위한 항생제와 화학약품의 사용은 허용되지 않는다. Pseudomonas tolaasii에 의해 분비되는 펩티드 독소인 톨라신과 톨라신 유사체들은 항진균 활성을 가져 푸른곰팡이병 방제에 성공적이었다. 푸른곰팡이 Trichoderma harzianum H1에 톨라신 펩티드를 처리하였을 때 곰팡이의 성장은 효과적으로 억제되었고, 실제 톱밥배지에서 균주 배양액을 푸른곰팡이 균사에 분사하였을 때, 균사 성장은 완벽하게 억제되었다. 특히, P. tolaasii 6264와 HK11 균주의 배양 추출액을 혼합하여 처리하였을 때에 항진균 활성이 크게 증가하였다. 따라서 이러한 균주들과 펩티드 독소들은 푸른곰팡이의 성장을 억제할 수 있고, 표고버섯 재배에서 푸른곰팡이병을 방제하기 위한 좋은 후보가 될 수 있다.

High Precision Molding Process for Barrier Ribs of PDP by using a Soft Mold and a Green Sheet

  • Ryu, Seung-Min;Park, Lee-Soon;Yang, Dong-Yol
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.316-319
    • /
    • 2007
  • In this paper, high precision molding process was developed using a soft mold to fabricate fine closed-types of the barrier ribs for PDP. A green sheet was employed to fabricate the barrier ribs in this process. The soft mold with good demolding characteristics was replicated from a master mold. An optimal forming load which would not fracture the soft mold was also determined. The barrier ribs of rectangular type with upper width of $30\;{\mu}m$ would be fabricated by this process.

  • PDF

폴리머 몰드를 이용한 금속 나노분말의 미세부품 제조 (Fabrication of Micro Component of Metallic Nano Powder Using Polymer Mold)

  • 이우석;김상필;이혜문;배동식;최철진
    • 한국분말재료학회지
    • /
    • 제14권3호
    • /
    • pp.202-207
    • /
    • 2007
  • Novel polymer mold process for fabrication of microcomponents using metal nanopowders was developed and experimentally optimized. Polymer mold for forming green components was produced by using a hard master mold and polydimethylsiloxane (PDMS). In the preparation of metallic powder premix for the green components without any defect, 90 wt.% 17-4PH statinless steel nanopowders and 10 wt.% organic binder were mixed by a ball milling process. The green components with very clear gear shape were formed by filling the powder premix into the PDMS soft mold in surrounding at about $100^{\circ}C$. Cold isostatic pressing (CIP) was very potent process to decrease a porosity in the sintered microcomponent. The microgear fabricated by the improved process showed a good dimension tolerance of about 1.2%.

느티만가닥버섯에서 Penicillium brevicompactum에 의해 유발된 곰팡이 오염 특성 (Characterization of Green Mold Contamination caused by Penicillium brevicompactum in Hypsizygus marmoreus)

  • 김민근;심순애;김아영;권진혁;장영호
    • 한국균학회지
    • /
    • 제48권4호
    • /
    • pp.397-405
    • /
    • 2020
  • 느티만가닥버섯은 일본에서 가장 많이 생산하고 소비되는 버섯으로 영양학적 가치, 우수한 식감 및 저장성 때문에 국내에서도 점진적으로 생산량이 늘어나고 있다. 2018년과 2019년 사이 경남지역 느티만가닥버섯 재배농가에서 자실체 발생이 불균일하며 수량이 감소하는 피해가 확인되었다. 분리한 오염균은 균총의 전체 표면에 회색을 띠는 진녹색포자를 형성하였다. 분리 균주의 균사생장 적합온도는 25℃로 확인되었으며 비교적 느리게 자라는 특성을 보여주었다. 분리 균주는 ITS rDNA 염기서열 분석결과 Penicillium brevicompactum과 100.0%의 상동성을 나타내었고, P. brevicompactum F51로 동정 및 명명하였다. 분리 균주를 처리한 배지는 농가에서 수집된 시료와 동일하게 버섯균사의 재생을 저해하면서 발이가 46.5-71.5% 수준까지 감소되었으며, 수량은 최대 75.6%까지 감소하였다. 이러한 결과는 P. brevicompactum이 느티만가닥버섯 재배과정에서 피해를 일으킨다는 사실을 국내에서 처음 보고하는 것이다.

항진균성 펩티드에 의한 표고버섯 푸른곰팡이병의 억제 (Suppression of green mold disease on oak mushroom cultivation by antifungal peptides)

  • 이형진;윤영배;허정훈;김영기
    • Journal of Applied Biological Chemistry
    • /
    • 제60권2호
    • /
    • pp.149-153
    • /
    • 2017
  • 원목과 톱밥배지에서 푸른곰팡이의 오염과 성장은 표고버섯의 생장을 심하게 저해할 수 있다. 표고버섯 재배에서 푸른곰팡이병의 방제를 위하여 농약과 항생제와 같은 화학 약품의 사용은 일반적으로 허용되지 않는다. 본 연구에서는 푸른곰팡이병의 방제를 위하여 느타리버섯에서 갈반병을 일으키는 세균성 병원균을 분리하고 이들의 펩티드 독소를 분리하였다. Pseudomonas tolaasii 균주들은 항진균 활성을 갖는 톨라신 및 이와 구조적 유사체인 다양한 펩티드 독소를 분비한다. 이러한 펩티드들은 표고버섯의 생장에는 영향을 주지 않는다는 것이 알려져 있다. 펩티드 독소들을 Trichoderma harzianum H1 푸른곰팡이에 처리하였을 때, 푸른곰팡이의 성장을 저해하였다. 펩티드를 분비하는 20 종의 P. tolaasii 균주 중에서 강, 중, 약의 항진균 활성을 가진 균주의 수는 각각 8, 5, 7 종으로 나타났다. 표고버섯을 재배하는 동안에, 펩티드 독소를 함유한 세균 배양액에서 세균을 제거한 배양원액을 톱밥배지 표면에 자란 푸른곰팡이 균사에 분무하였다. 배양원액은 푸른곰팡이의 성장은 억제할 수 있는 반면, 표고버섯 생장과 생산에는 영향을 주지 않았다. 펩티드 독소를 함유하는 배양원액은 곰팡이의 흰색 균사체를 노란색의 마른 딱지로 변화시켰고, 이것은 펩티드 독소가 강력한 항진균 활성과 살균 활성을 갖고 있음을 보여준다.

Molecular Markers for Detecting a Wide Range of Trichoderma spp. that Might Potentially Cause Green Mold in Pleurotus eryngii

  • Lee, Song Hee;Jung, Hwa Jin;Hong, Seung-Beom;Choi, Jong In;Ryu, Jae-San
    • Mycobiology
    • /
    • 제48권4호
    • /
    • pp.313-320
    • /
    • 2020
  • In Pleurotus sp., green mold, which is considered a major epidemic, is caused by several Trichoderma species. To develop a rapid molecular marker specific for Trichoderma spp. that potentially cause green mold, eleven Trichoderma species were collected from mushroom farms and the Korean Agricultural Culture Collection (KACC). A dominant fungal isolate from a green mold-infected substrate was identified as Trichoderma pleuroticola based on the sequences of its internal transcribed spacer (ITS) and translation elongation factor 1-α (tef1) genes. In artificial inoculation tests, all Trichoderma spp., including T. atroviride, T. cf. virens, T. citrinoviride, T. harzianum, T. koningii, T. longibrachiatum, T. pleurotum, and T. pleuroticola, showed pathogenicity to some extent, and the observed symptoms were soaked mycelia with a red-brown pigment and retarded mycelium regeneration. A molecular marker was developed for the rapid detection of wide range of Trichoderma spp. based on the DNA sequence alignment of the ITS1 and ITS2 regions of Trichoderma spp. The developed primer set detected only Trichoderma spp., and no cross reactivity with edible mushrooms was observed. The detection limits for the PCR assay of T. harzianum (KACC40558), T. pleurotum (KACC44537), and T. pleuroticola (CAF-TP3) were found to be 500, 50, and 5 fg, respectively, and the detection limit for the pathogen-to-host ratio was approximately 1:10,000 (wt/wt).