• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2012

The objective of this study was to investigate the sanitary and nutritional requirements for the industrialization of commercial kwamegi from Pacific herring Clupea pallasii (CK-PH). The proximate composition of CK-PH was 46.4-47.2% moisture, 24.7-25.6% crude protein, 23.6-25.2% crude lipid, and 2.5-2.9% ash, which differed significantly from that of commercial kwamegi from the Pacific saury Cololabis saira. According to the volatile basic nitrogen content, heavy metal content, and viable cell and coliform group counts, products K and F (prepared by a general process) maintained their freshness, whereas product T (treated with green tea extract) did not. Products K and F contained five types of biogenic amine: agmatine sulfate (2,596 and 2,067 mg/kg, respectively), putrescine dihydrochloride (8.5 and 8.0 mg/kg, respectively), cadaverine (3.7 and 3.9 mg/kg, respectively), histamine (17.0 and 12.4 mg/kg, respectively), and spermidine (8.7 and 8.0 mg/kg, respectively). Product T contained six amine types: tyramine (12.5 mg/kg), agmatine sulfate (2,723 mg/kg), putrescine dihydrochloride (29.4 mg/kg), cadaverine (321.6 mg/kg), histamine (45.3 mg/kg), and spermidine (13.6 mg/kg). The total amino acid content of product K (22.16/100g) was 5.8% lower than that of product F. The major amino acids of products K and F were aspartic acid, glutamic acid, leucine, and lysine. No difference was found in the fatty acid composition of products K and F. The major fatty acids in products K and F were 18:1n-9, 20:5n-3, and 22:6n-3. Based on the recommended daily dietary allowances for Koreans, the significant minerals in products K and F were calcium, phosphorus, and magnesium.

• Culinary science and hospitality research
• /
• v.22 no.4
• /
• pp.24-36
• /
• 2016

This study investigated the quality characteristics of Haengbyung using dry rice flour added with various amounts (0, 20, 40, 60%) of raw and steamed apricot juice. The moisture contents, color values, pH, texture and sensory evaluation(attribute difference and acceptance) for the samples were tested. The moisture content (p<0.001) and pH(p<0.001) of the Haengbyung significantly decreased with the increase of apricot juice. As for the color of the Haengbyung samples, the higher percentage of the apricot juice showed the lower L-value (p<0.001), and higher a-value(p<0.001) and b-value(p<0.001). Texture profile analysis of Haengbyung samples showed that hardness(p<0.001) and gumminess(p<0.001) increased, while adhesiveness(p<0.001) and cohesiveness(p<0.05) decreased with increasing amounts of apricot juice. An attribute difference test of Haengbyung samples showed that appearance(apricot color(p<0.001) and dryness(p<0.001)), flavor(sour(p<0.001), acerbic (p<0.001), and green fruit(p<0.001)), and taste(sour(p<0.001), acerbic(p<0.001), and astringent(p<0.05) as increased as apricot juice amounts increased. The control and Haengbyung sample with 20% of apricot juice (both raw and steamed) showed the highest acceptance in taste, texture, and overall acceptability in consumer ranking testing.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.3
• /
• pp.3-16
• /
• 1974

One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

• Korean journal of food and cookery science
• /
• v.29 no.4
• /
• pp.353-359
• /
• 2013

The effect of the addition of dough ripe stage rice (DRSR) and yellow ripe stage rice (YRSR) on the quality characteristics of Backsulgi was investigated. The DRSR and YRSR addition ratio of 30% was selected by preliminary sensory evaluation study for which backsulgi was prepared with DRSR added to full ripe stage rice (FRSR, control) as the weight ratio of 0, 20, 30 and 50%. The pasting properties of 30% added DRSR and YRSR flours, analyzed with rapid viscosity analyzer (RVA), were compared with FRSR flour. The RVA values of holding, breakdown, final viscosities were higher in 30% DRSR and YRSR flours than in control. Backsulgi prepared with 30% DRSR and YRSR showed lower moisture content along with higher greenness and yellowness than control. As a result of analysis with texture analyzer, adhesiveness, springiness, cohesiveness, chewiness and resilience were lower in backsulgis with 30% DRSR and YRSR than in control. In the sensory evaluation, backsulgis with 30% DRSR and YRSR were assessed as having more intensive green color, and more greenish and delicious taste than control. Furthermore, backsulgi with 30% DRSR showed higher score of overall acceptability than 30% YRSR (p<0.05), and not significantly different score with control (p>0.05). Therefore, the addition of 30% DRSR could give favorable color and flavor to backsulgi.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.1-7
• /
• 2006

Anatomical and physical properties of kenaf grown in Chuncheon, Korea were investigated using light and scanning electron microscopy and X-ray diffraction method. Bast fiber, phloem ray, cortex parenchyma cell and sieve tube member were observed in phloem, and vessel element, fiber and ray in xylem. Solitary and multiple radial pores in xylem existed. The cell types of ray parenchyma in radial section were procumbent, upright and square cells. The length of bast fiber increased with increasing the growth period. The length of wood fiber was 0.74~0.82 mm, but was not significantly different between the growth period and stem height. Relative crystallinity was 53~74% in phloem and 43~58% in xylem. Cellulose crystallinity width was 2.68~3.24 nm in phloem and 2.46~2.95 nm in xylem. The green moisture content and green density increased but basic density decreased with increasing the stem height.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.10-16
• /
• 2018

Lindera erythrocarpa is a less utilized species in Korea although that it has straight stem and it grows up to 40 cm in diameter. A proper kiln-dry schedule is required in advance to utilize an unknown species. Terazwa's quick oven-dry method was used to find it and which was confirmed by drying 25 mm thick boards in a kiln. The average green moisture content and the average green specific gravity of Lindera erythrocarpa are 72.3% and 0.53, respectively. Prospective kiln-drying conditions obtained by Terazwa's quick oven-dry method are a initial dry-bulb temperature of $50^{\circ}C$, a initial wet-bulb depression of $4^{\circ}C$ and a final dry-bulb temperature of $75^{\circ}C$, which are in a good agreement with USDA FPL kiln-dry schedule of T5-D4. 25 mm thick boards dried in a kiln with T5-D4 kiln-dry schedule did not have any severe drying defects such as honycombing and warping. A severer kiln-dry schedule of T8-C5 was developed and applied to another kiln-drying run to confirm it.

• Korean journal of food and cookery science
• /
• v.28 no.1
• /
• pp.17-24
• /
• 2012

The present study was performed to expand the application of mechanically impacting technology reported in our previous studies. Several parameters were analyzed to research Korean indigenous pigmented rice. The proximate composition of Korean indigenous rice was the following; 12.0-13.4% moisture, 74.1-77.3% carbohydrate, 6.8-8.7% crude protein, 1.68-3.25% crude lipid, 0.78-1.38% crude ash, with a 6.6-7.07 pH value. The phenolic compound content of red rice was twice that of black rice. Moreover, antioxidative activity was estimated by DPPH radical-scavenging activity (IC50 = 0.15-1.04 mg/mL). Anthocyanin and chlorophyll in each pigmented rice type were detected by spectrophotometer. Garaedduk samples were prepared with non-waxy rice, salt, 24% water, and/or 15% indigenous pigmented rice(red, green and black, w/w of total swelling non-waxy rice) and adapted with or without mechanically impacting technology. Hardness, as a main texture profile parameter of Garaedduk was maintained up to 3 days under storage at $20^{\circ}C$. The results suggest that Korean indigenous pigmented rice can be applied for functional Garaedduk adapted with mechanically impacting technology.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.2
• /
• pp.2949-2967
• /
• 1973

The purpose of this study is to find out and determine the minimum consumptive use of water for Korean cabbage and turmp, so that the minimum water requirement can be secured always for a stable cultivation of these vegetables regardless of weather conditions. The experiment was conducted in two periods; first one from May to July and second one from August to October, each experiment with two varieties of cabbage and two varieties of radish with 2 replicants and 15 treatments. The results found from the above are briefly as follows: 1. Since the mean soil moisture equivalent 64 days after the treatment was 28.5% and the soil moisture content at the time was 2.67% which is far less than that of the wilting point, the crop seemed to be extremely caused by a drought. 2. The rate of 51 days after the seeding, soil moisture content of plot No.2 where irrigation has been continuous was the highest or 21.3%, whereas the plot No.14 without irrigations was 11.2% and the lowest. Therefore, the soil moisture content for the minimum qrowth seemed to be 20%. 3. The consumptive coefficient of Blaney and Criddle on cabbage in two periods were K=1.14 and 0.97 respectively, and on radish in two periods were K=1.06 and 0.86 respectively, thus, cabbage was higher than radish. The consumptive coefficient in the first experiment (May-July) was 0.17 to 0.20 higher than the 2nd experiment(August-October). 4. Nomally, cabbage and radish germinate within one week, however, the germination ot these crops which were treated with a suspended water supply from the beginning took two full weeks. 5. When it elapsed 30 days after seeding, the conditions in plot 1,2 and 3 were fairly good however, the crops in the plops other than these showed a withering and the leaves were withered and changed into high green due to an extrem drought. Though it was about same at the beginning, the drought damage on cabbage was worse than that on radish period, and the reasos for this appears in the latter that the roots are grown too deep. 6. The cabbage showed a high affinity between treated plots and varieties. Consequently, it can be said that cabbage is very suseptive to drought damage, and the yield showed a difference of 35% to 56% depending on the selection oe varieties. 7. The radish also showed a high affinity between the treated plots, however, almost us affinity existed between varieties. Therfore, the yield of radish largely depends on the extent of drought, and the selection of variety does not affect at all. 8. The normal consumptive use on cabbage is $0.62{\ell}/sec$, while that on radish is $0.64{\ell}/sec$, and the minimum optimum water requirement that was obtained in this study is $4,000cc/day/m^3$ or $0.462{\ell}/sec/ha$.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.238-243
• /
• 2009

To investigate the characteristics of moisture content (MC), moisture distribution and starting point of drainage in a rockwool slab culture, time domain reflectometry (TDR) sensors were used in a drip irrigation system. MC values ($0{\sim}100%$) measured by TDR sensors in a slab were compared to those by loadcells. Seventy two seedlings of paprika (Capsicum annuum L.) were cultured for $5{\sim}6$ months in a green-house and the starting point of irrigation was determined by the average value of three TDR sensors which were inserted diagonally across the slabs under the plants. MCs as a standard for starting point of irrigation by TDR were determined with 40%, 50%, and 60%. Distribution of MCs in a slab measured with five TDR sensors equally spaced from two irrigation points were not much different when the MC in the slab increased from zero to saturation point. The saturated MCs in the slab were presented at $58{\sim}65%$ and the drain was started when the MC became around $50{\sim}55%$. At the saturated MC in the slab, TDR sensors presented 100% but the values from the loadcell showed 90% at the same time. However, measurement errors between two methods for MC remarkably decreased with a decrease in the MC in a slab. Especially when the MC was maintaining below 60%, the errors between TDR and loadcell methods for measuring MC in the rock-wool slab were less than 5%. There were no significant differences in number of fruits and fresh and dry weights of fruits when they were cultured under the different MC conditions with three irrigation regimes (40%, 50%, and 60%). These results indicated that the MC control by TDR sensors in a rock-wool based paprika culture can be suggested as a method to determine the starting point of irrigation for a soilless culture system.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.912-917
• /
• 2005

Physicochemical components of dried green algae, Seaweed fulvescens (Capsosiphon fulvescens) with $96.02{\pm}0.02%$ moisture content, were investigated. Crude protein, crude lipid, ash and carbohydrate content of C. fulvescens were $31.76{\pm}0.26,\;1.01{\pm}0.21,\;13.58{\pm}0.62\;and\;53.65{\pm}0.73$, respectively. Predominant minerals were Na, Mg, Ca, K and P. Fe $(122.83{\pm}11.19mg/%)\;and\;Se\;(0.90{\pm}0.07mg%)$ contents in were higher than those of other seaweeds. Major free sugars were identified as fructose, glucose, sucrose, maltose and galactose. Organic acid including L-malic acid, citric acid, tartaric acid and d-malic acid were detected. Most abundant amino acids were glutamic acid, aspartic acid and alanine. Main fatty acids were palmitic acid, linolenic acid and stearidonic acid, with 58.37% polyenes.