• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.30-35
• /
• 1999

A simple, rapid, efficient method is for extraction of 13 synthetic water-soluble food colours (Tartrazine, Amarnth, Indigo carmine, New coccine, Sunset yellow FCF, Allura red AC, Eosine, Fast Green FCF, Brilliant Blue FCF, Erythrosine, Acid red, phloxine, Rose Bengal) by polyamide resin and for their quantitative by high performance liquid chromatography (HPLC). Colours (coal-tar dyes) were extracted with polyamide resin and then determinated by HPLC. The HPLC conditions using a reverse phase partition type column $(Nova-pak\;C_{18})$, photodiode array (PDA) detector and 1% Ammonium acetate / 60% acetonitrile in water as eluent, were acceptable for various kinds of colorants. By the use of the proposed method, a survey of coal-tar dyes was carried out on 20 samples and that were detected $4.76{\sim}133.47\;ppm$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.701-705
• /
• 1992

The effect of different boiling methods(with distilled water, 1% salt added water and 1% sodium bicarbonate added water) on the physicochemical properties of Su Ri Chwi (Synurus palmatopinnonatifidus var. indivisus KITAM.) were investigated. The addition of 1% sodium bicarbonate (baking soda) to the boiling water resulted in an increase in the pH of effluent. The green value of cooked Su Ri Chwi was simillar to the raw material. Su Ri Chwi cooked in 1% sodium bicarbonate added for 10minutes retained higher chlorophyll and vitamin C contents than those of Su Ri Chwi treated in distilled water and 1% salt water for 30minutes. 70% of the water-soluble proteins in raw Su Ri Chwi was albumin. However, albumin was decreased by the method used. The contents of glutelin, globulin, and prolamin were increased by the cooking, vice versa. The contents of NDF, ADF, cellulose, and lignin were decreased regardless of the method used, on the other hand, the content of hemicellulose was increased.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.15-25
• /
• 2012

In order to resolve transportation system focused on vehicles which have led to all sorts of problems such as traffic congestion, air pollution and so on, Korea recently have tended to center around Transit Oriented Development(TOD) which is capable of initiating public traffic demands. It is imperative to develop objective evaluation method which is able to measure pedestrian environment and amenity in order to facilitate green transit. The purpose of this paper is to present evaluation indices and measurement framework of pedestrian environment by analyzing effect on TOD major planning factors such as diversity, density, design, and supply etc. For this, we applied evaluation index with regard to TOD planning factors, investigating connection to pedestrian and employed AHP (Analytic Hierarchy Process) so as to quantify the result of measurement in Jongro 3ga and Hangangjin station. As a result, we presented relationship between travel patterns of pedestrian and each TOD planning factor. More importantly, the proposed framework is expected to make the best of the visualization as well as evaluation method for the pedestrian accessibility, convenience of public transportation, and the mixed land-use patterns in subway area and transit center.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.315-321
• /
• 2009

The Very Large Marine Structure has been widely used new method of ocean space instead of method for reclamation Therefore, VLFS is proposed to coincide on such request. It can be established regardless of nature of soil and height of water, and stream of flow exists under the floating structure, there is seldom effect in natural environment. Fuertherrnore, it can do easily to do assembly and taking to pieces due to expansion or removal. Based on the regulation by class, VLFS have to possess more than enough structural strength against severe wave loading induced by green sea condition Therefore, There are performed structural simulation as well as experimental test about expected loading scenario in order to examine the safety of structure. Up to now, various examinations based on the strength limit value of the main structural material have been done based on the elasticity response analysis. However, there is little finding about the collapse behavior and the safety when the load that exceeds the collapse of the material acts. In the present study, we investigated the collapse behavior based on the ultimate limit state calculated by FE-analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.56-61
• /
• 2009

Paradigm depending only on fossil fuel for building heat source is rapidly changing. Accelerating the change, as it has been known, is obligation for reducing green house gas coming from use of fossil fuel, i.e. reaction to United Nations Framework Convention on Climate Change. In addition, factors such as high oil price, unstable supply, weapon of petroleum and oil peak, by replacing fossil fuel, contributes to advance of environmental friendly renewable energy which can be continuously reusable. Therefore, current new energy policies, beyond enhancing effectiveness of heat using equipments, are to make best efforts for national competitiveness. Our country supports 11 areas for new renewable energy including sun light, solar heat and wind power. Among those areas, ocean thermal energy specifies tidal power generation using tide of sea, wave and temperature differences, wave power generation and thermal power generation. But heat use of heat source from sea water itself has been excluded as non-utilized energy. In the future, sea water heat source which has not been used so far will be required to be specified as new renewable energy. This research is to survey local heating system in Europe using sea water, central solar heating plants, seasonal thermal energy store and to analyze large scale central solar heating plants in German. Seasonal thermal energy store necessarily need to be equipped with large scale thermal energy store. Currently operating central solar heating system is a effective method which significantly enhances sharing rate of solar heat in a way that stores excessive heat generating in summer and then replenish insufficient heat for winter. Construction cost for this system is primarily dependent on large scale seasonal heat store and this high priced heat store merely plays its role once per year. Since our country is faced with 3 directional sea, active research and development for using sea water heat as cooling and heating heat source is required for seashore villages and building units. This research suggests how to utilize new energy in a way that stores cooling heat of sea water into seasonal thermal energy store when temperature of sea water is its lowest temperature in February based on West Sea and then uses it as cooling heat source when cooling is necessary. Since this method utilizes seasonal thermal energy store from existing central solar heating plant for heating and cooling purpose respectively twice per year maximizing energy efficiency by achieving 2 seasonal thermal energy store, active research and development is necessarily required for the future.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.41-55
• /
• 2017

This study predicts the average scores of top 150 PGA golf players on 132 PGA Tour tournaments (2013-2015) using data mining techniques and statistical analysis. This study also aims to predict the Top 10 and Top 25 best players in 4 different playoffs. Linear and nonlinear regression methods were used to predict average scores. Stepwise regression, all best subset, LASSO, ridge regression and principal component regression were used for the linear regression method. Tree, bagging, gradient boosting, neural network, random forests and KNN were used for nonlinear regression method. We found that the average score increases as fairway firmness or green height or average maximum wind speed increases. We also found that the average score decreases as the number of one-putts or scrambling variable or longest driving distance increases. All 11 different models have low prediction error when predicting the average scores of PGA Tournaments in 2015 which is not included in the training set. However, the performances of Bagging and Random Forest models are the best among all models and these two models have the highest prediction accuracy when predicting the Top 10 and Top 25 best players in 4 different playoffs.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.503-513
• /
• 2016

In order to reduce the green-house gas exhaustion, International Maritime Organization (IMO) has been reinforcing carbon gas regulations. Due to the regulations, a lot of competitions for designing Eco ship in the shipbuilding industry are progressing now. It is faced with the necessity of reducing hull weight by combining automated systems for optimal compartment arrangement with hull structural design. Most researches on optimum structural design method have been consistently in progress and applied to minimize weight and cost of mid-ship section in preliminary ship design stage based on analytical structural analysis method on fixed compartment arrangement. In order to reduce design period and to improve international technical competitiveness by shortening the period of hull structural design and enhancing design accuracy, it has been felt necessity to combine optimized compartment arrangement with optimum design of ship structure based on the international regulations and rules. So in this study, the automated design algorithm for longitudinal members has been developed to combine automated algorithm of compartment arrangement with hull structural design system for oil tanker. The SeaTrust-Hullscan software developed by Korean Register is used to perform ship structural design for mother ship and selected design cases. The effect of weight reduction is verified with comparison of ship weight between mother ship and the cases suggested in this study.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.12 no.2
• /
• pp.212-221
• /
• 1999

Tongue examination is the most unique and important diagnostic method of oriental medicine. It reveals patients condition and give some information about direction of therapy and background of disease as well as produces clue of duration of disease changing that grasps it from outside. The aims of this study show that results of tongue examination is related to somewhat special pattern. we study 27 patients(age of means: 63.01 years old, male: 14, female: 13) who come to Wonkwang University Oriental-Medicine Hospital at Chonju with diabetes mellitus or diabetes mellitus complications. Tongue colors of this study result in pale-red 8 cases, pale 6 cases, red 6 cases, crimson 5 cases, blue-green-purple 2 cases and tongue fur of this study result in white-fur 16 cases, yellow-fur 7 cases, black-fur 1 case, none-fur 3 cases. And the condition of tongue fur with grimy and thin result in thin-white-fur 12 cases, white-grimy-fur 4 cases, thin-yellow-fur 5 cases, grimy-yellow-fur 2 cases, black-fur 1 case. Means level of fasting glucose during 7 days was $223.24{\pm}32.l7mg/dl$ and postprandial 2hours was $286.37{\pm}24.54mg/dl$ There were no changes in tongue body and tongue color but changes occur in tongue fur with 9cases in this period. 5 cases of patient make a difference between FBS(fasting blood glucose) and postprandial blood glucose level more than l00mg/dl (2 cases of patient with thin-white-fur gradually turned to slight-yellow-fur. There were no changes in 2 cases of patient with crimson-none-fur and pale-white-fur. 1 case of patient with slimy-yellow-fur turned to black fur.) 11 cases of patient had lesser than $10\%$ hemoglobin $A_lC$ and tongue color of these patient were pale-red 5cases, pale 2 cases, red 2 cases, crimson 2 cases. 16 cases of patient had more than $10\%$ Hemoglobin $A_1C$ and tongue color of these patients were pale-red 3 cases, pale 4 cases, red 4 cases, crimson 3 cases, blue 2 cases. This result shows that quantity of Hemoglobin $A_1C$ make a somewhat role in tongue color. The above results show that tongue color, fur color, condition and change of fur in diabetes mellitus patients is various in pale-red, pale, crimson, none-fur. So it is difficult to give an exact diagnosis on pathology of diabetes mellitus only with tongue examination because there are a little matches between blood glucose level, prevalence-period, short-term blood glucose regulation and tongue and fur colors.

• Journal of Internet of Things and Convergence
• /
• v.7 no.4
• /
• pp.85-94
• /
• 2021

This study verified what differences in screen golf content characteristics, intention to reuse, customer satisfaction and economic value experienced by consumers according to the image feeling, expression method, and image color provided by screen golf graphic content. In addition, the purpose of this study was to analyze what kind of influence the content characteristics of screen golf have on the economic value and what kind of influence the intention to reuse and customer satisfaction have in this process. From September 1, 2021 to September 30, 2021, a survey of 225 copies of consumers using the screen golf course was conducted. For data processing, frequency analysis, factor analysis, reliability analysis, cluster analysis, chi-square analysis and 3-step mediated regression analysis were performed. The research results are as follows. First, the preferred image feeling showed a high level of clean and sophisticated feeling and the preferred expression method showed a high realistic image. In addition, the preferred image color showed a high level of green color. Second, there were differences in competitiveness, ease of use, sense of solidarity and realism according to the degree of consideration of graphic content and differences in consumer's intention to reuse, customer satisfaction, and economic value. Third, in the relationship between screen golf content characteristics and economic value, customer satisfaction and re-use intention had a mediating effect. Through this study, by providing basic data to derive the graphic design model of screen golf, the operating entity suggested a way to improve economic benefits and tried to contribute to the growth of the screen golf industry.