• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2002년도 춘계 공동학술발표회
• /
• pp.167-169
• /
• 2002

The extended Born, or localized nonlinear approximation of integral equation (IE) solution has been applied to inverting single-hole electromagnetic (EM) data using a cylindrically symmetric model. The extended Born approximation is less accurate than a full solution but much superior to the simple Born approximation. When applied to the cylindrically symmetric model with a vertical magnetic dipole source, however, the accuracy of the extended Born approximation is greatly improved because the electric field is scalar and continuous everywhere. One of the most important steps in the inversion is the selection of a proper regularization parameter for stability. Occam's inversion (Constable et al., 1987) is an excellent method for obtaining a stable inverse solution. It is extremely slow when combined with a differential equation method because many forward simulations are needed but suitable for the extended Born solution because the Green's functions, the most time consuming part in IE methods, are repeatedly re-usable throughout the inversion. In addition, the If formulation also readily contains a sensitivity matrix, which can be revised at each iteration at little expense. The inversion algorithm developed in this study is quite stable and fast even if the optimum regularization parameter Is sought at each iteration step. Tn this paper we show inversion results using synthetic data obtained from a finite-element method and field data as well.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.15-28
• /
• 1998

As an alternative for solving the incompressible Navier-Stokes equations, we present a vorticity-based integro-differential formulation for vorticity, velocity and pressure variables. One of the most difficult problems encountered in the vorticity-based methods is the introduction of the proper value-value of vorticity or vorticity flux at the solid surface. A practical computational technique toward solving this problem is presented in connection with the coupling between the vorticity and the pressure boundary conditions. Numerical schemes based on an iterative procedure are employed to solve the governing equations with the boundary conditions for the three variables. A finite volume method is implemented to integrate the vorticity transport equation with the dynamic vorticity boundary condition . The velocity field is obtained by using the Biot-Savart integral derived from the mathematical vector identity. Green's scalar identity is used to solve the total pressure in an integral approach similar to the surface panel methods which have been well-established for potential flow analysis. The calculated results with the present mettled for two test problems are compared with data from the literature in order for its validation. The first test problem is one for the two-dimensional square cavity flow driven by shear on the top lid. Two cases are considered here: (i) one driven both by the specified non-uniform shear on the top lid and by the specified body forces acting through the cavity region, for which we find the exact solution, and (ii) one of the classical type (i.e., driven only by uniform shear). Secondly, the present mettled is applied to deal with the early development of the flow around an impulsively started circular cylinder.

• 한국수산과학회지
• /
• 제27권6호
• /
• pp.782-786
• /
• 1994

Dey and Morrison (1979)이 육상의 전기탐사문제의 해결에 성공적으로 적용한 적분차분법(integral finite different method)의 해양에서의 응용성을 연구해보기 위해, 해석해가 존재하는 연안역의 해수고유진동 문제를 도출하여 기존의 고유진동문제에 적용하여 보았다. 그 응용성의 평가는 기존 해양에 널리 적용되는 기존차분법(conventional finite different method)으로 구한 수치결과와 적분차분법으로 구한 결과를 해석해와의 비교검증을 통하여 실시되었다. 그 결과 적분차분법으로 구한 고유치와 고유함수값이 기존차분법으로 구한 결과보다 좋은것으로 나타났다. 이러한 결과는 적분차분법의 경우 원래의 기본방정식에 Green's theorem을 적용함으로써, 기본방정식에 존재하는 2계 미분연산자가 1계 미분연산자로 해석적으로 처리되었기 때문으로 사료된다. 따라서 적분차분법을 이용하여 해수고유진동문제를 비롯한 다른 유사문제를 풀 경우 기본차분법보다 좋은 결과가 나을 것으로 사료된다. 또한 미분방정식의 수치해를 구할 경우 적분법이 차분법보다 좋은해를 줄 수 있다는 것을 증명한 것으로 사료된다.

• 에너지공학
• /
• 제8권4호
• /
• pp.540-545
• /
• 1999

고전적인 Fourier 열전도 방정식은 극저온하에서 또는 아주 짧은 시간동안의 가열시 타당성이 없는 것으로 고려되었다. 이러한 조건하에서는 열전도파의 성질이 지배적이기 때문에 , 수정된 Fourier 법칙에 근거한 쌍곡선형 열전도 방정식이 도입되었다. 열전도에 대한 Fourier 모델과 쌍곡선형 열전도모델이 적분변환법과 함께 Green 함수방법을 이용하여 분되었다. 한쪽 표면에서 주기적인 표면가열을 하는 유한한 평판의 열유속 분포 및 온도분포의 해를 제시하였고 각가의 모델로부터 얻어진 결과를 서로 비교검토하였다. 쌍곡선형 열전도 방정식에서 유도된 열전도파는 매개물을 통해 전파되어 맞은편쪽의 단열표면에서 가열 표면쪽으로 반사하였으나 , 고전적인 Fourier 모델에 의한 열은 열적교란이 매개물의 전체에 걸쳐서 전달된 후 즉각적으로 무한한 속도로 열전파가 발생함을 보여주었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.187-191
• /
• 2003

The motion and time-mean drift force of a 2-D floating BBDB in waves are studied with and without taking account of fluctuating air pressure in the air chamber. It has been found numerically that the drift for a of the BBDB is in the reverse direction of propagation of the incident waves over specific frequency ranges as found by McCormick through his experiment work. The drift force is calculated by Pinkster's near-field method. Since Maruo's formula method for the drift force is always positive, Maruo's formula is only approximate and should be replaced by the correct near-field method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권4호
• /
• pp.546-558
• /
• 2013

The research performed in this paper was carried out to investigate the numerical analysis of the sheet cavitation on marine propeller. The method is boundary element method (BEM). Using the Green's theorem, the velocity potential is expressed as an integral equation on the surface of the propeller by hyperboloid-shaped elements. Employing the boundary conditions, the potential is determined via solving the resulting system of equations. For the case study, a DTMB4119 propeller is analyzed with and without cavitating conditions. The pressure distribution and hydrodynamic performance curves of the propellers as well as cavity thickness obtained by numerical method are calculated and compared by the experimental results. Specifically in this article cavitation changes are investigate in both the radial and chord direction. Thus, cross flow variation has been studied in the formation and growth of sheet cavitation. According to the data obtained it can be seen that there is a better agreement and less error between the numerical results gained from the present method and Fluent results than Hong Sun method. This confirms the accurate estimation of the detachment point and the cavity change in radial direction.

• 한국통신학회논문지
• /
• 제18권11호
• /
• pp.1669-1676
• /
• 1993

본 논문에서는 도체 상자에 부착된 선형 모노폴(thin-straight monopole) 안테나를 wire-grid방법을 적용하여 안테나 및 도체상자를 모델링하였고, 효율적인 계산을 위해 Pocklington 적분 방정식과 모멘트 방법(Moment Method)을 사용하여, 안테나의 특성 변화를 계산하였다. 안테나 및 모델링된 도체상자에 이용된 기저함수는 PWS(Piecewise Sinusoidal)함수이고, 도체상자의 모서리에 흐르는 전류를 효과적으로 표현하기 위해, 접합기저함수(Junction Basis Function)를 사용하였다. 특히, 모서리의 꼭지점에서 전류의 연속 조건을 만족하기 위해, 접합기저 함수가 중복되도록 하였다. 안테나 및 도체상자에 흐르는 전류분포를 계산하여, 입력 임피던스 및 복사패턴을 구하였고, 기존의 결과 데이터와 비교하였다.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.95-101
• /
• 2009

The present study is to estimate the effect of wave height affecting at the front face of breakwater systems due to specification of submarine trench such as distance from breakwater to dredged area and width of dredge. The wave diffraction field, which is important hydraulic factor in the ocean, is considered to be two dimensional(2D) plane and the configuration of the submarine dredge on the sea bed designated by single horizontal long-rectangular pit system according to the various specific conditions of dredged locations. The numerical simulation is performed by using Green function based on the boundary integral equation and meshed at moving boundary conditions. The results of present numerical simulations are illustrated by applying the normal incidence. It is shown that the ratios of wave height at the front face of breakwater was varied by dependance of distant from breakwater to dredged area and width of dredge. It means that, when the navigation channel or pit breakwater is dredged on seabed, engineers have to consider the specification of dredge. This study can effectively be utilized for safety assessment to various breakwater systems in the ocean field and provided for safety construction of offshore structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1752-1761
• /
• 2000

This paper describes the far-field estimation using the near-field measurement data. Measurement in far-field region gives us the acoustical characteristics of the source but in general measurement is made in near-field such as acoustic water tank or anechoic chamber, so far-field acoustical characteristics of the source should be predicted from near-field data. In this case, the number of measurement points in the near field which relates to the accuracy of the predicted field and the amount of data processing, should be optimized. Existing papers say that measurement points is proportional to kL and depends on geometry and directivity of the source. But they do not give us any definite criterion for the required number of measurement points. Boundary Collocation Method which is one of the far-field prediction methods, is analyzed based on Helmholtz integral equation and Green function and it has been found that the number of measurement points is optimized as 0.54kL which is about one half of the existing results.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.51-55
• /
• 2004

This paper presents a fast and stable imaging scheme using the localized nonlinear (LN) approximation of integral equation (IE) solutions for inverting electromagnetic data obtained in a crosswell survey. The medium is assumed to be cylindrically symmetric about a source borehole, and to maintain the symmetry a vertical magnetic dipole is used as a source. To find an optimum balance between data fitting and smoothness constraint, we introduce an automatic selection scheme for a Lagrange multiplier, which is sought at each iteration with a least misfit criterion. In this selection scheme, the IE algorithm is quite attractive for saving computing time because Green's functions, whose calculation is a most time-consuming part in IE methods, are repeatedly re-usable throughout the inversion process. The inversion scheme using the LN approximation has been tested to show its stability and efficiency, using both synthetic and field data. The inverted image derived from the field data, collected in a pilot experiment of water-flood monitoring in an oil field, is successfully compared with that derived by a 2.5-dimensional inversion scheme.