• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.458-463
• /
• 2010

MLCC (multi-layer ceramic capacitor) is usually fabricated by lamination of predetermined number of single layers. Often, the state of MLCC before sintering is called the green state, whose strength comes from the adhesion between the dielectric material and the polymer binder. Therefore the lamination of a single layer before sintering can be easily deformed by environment due to the relatively lower strength. After the compression process, which helps single sheets cohereto with adjacent sheets, the MLCC green bar is preheated to resolve the probable internal stress. Unfortunately, unexpected deformation after preheating resulted in problems during cutting of the MLCC green bar. In this study, one of 2 primary hypotheses which were proposed to resolve the unexpected deformation after preheating was examined by quantitative experiment with GC/MS (gas chromatograpy/mass spectrometer). The proportion of deformation caused by DOP evaporation, which was primarily evaporated componet during preheating, to the total deformation of the MLCC green bar was found to be 53%.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.207-210
• /
• 1998

To prolong the shelf life of green chili pepper, packaging films such as 30 $\mu\textrm{m}$ low density polyethylene(LDPE), 20 $\mu\textrm{m}$ perforated polyolefin (SM250), 30 $\mu\textrm{m}$ cast polypropylene (CPP) and 15 $\mu\textrm{m}$ polyolefin (MPD) were used. LDPE showed a suitable gas concentration which consisted of 3-5% O$_2$ and below 5% CO$_2$for keeping quality of green chili peppers after 10 days. Though weight loss was 9.3% for SM250 after 5 days, others showed below 2.0% weight loss after 40 days. Green chili peppers inside CPP package revealed a great decrease in ascorbic acid content after 30 days. SM250 showed a less total microbial count among packages, but there was no great differences among packages.

• Journal of the Korean housing association
• /
• v.24 no.5
• /
• pp.69-76
• /
• 2013

The seriousness of greenhouse gas exhaustions and energy use of the building has increased, the world is making an effort with many requests and the consultation for sustainable development. For this reason, Green Building Certification Criteria has been implemented to reduce environmental load, high-performance and environmentally friendly in the United States, the United Kingdom and Germany. In response to the global trend like this, the Korean Government has induced the eco-friendly construction and sustainable development to implement the G-SEED (Green Building Certification Criteria of Korea) in 2002. However, in spite of the many authentication result, G-SEED has been pointed out that it needs for improve in the evaluation system of Apartment sector which accounts for more than 40% of the authentication. Therefore, the purpose of this study is to suggest improvements in the evaluation system. To achieve this, this study have selected for LEED, BREEAM, DGNB of comparison target, drawn improvements through comparing transition process in G-SEED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.171-174
• /
• 2000

This study uses neon and xenon gas mixture discharges to determine the effects of the neon plasma emission on the characteristics of visible emission from the stimulation of the red, green, blue(RGB) phosphor layers in a surface-type alternate current plasma display panel(AC PDP). With a mixture of less than 2% xenon to neon, it is found that the luminance changes in the visible emission of the phosphor layers are similar to those of the neon plasma emission. In the range of xenon mix ratio from 2 to 5%, the luminance of the red, green, blue(RGB) phosphor layers decreases with a decrease in the neon plasma emission intensity. However, with a mixture of above 5% xenon to neon, the luminance of the red, green, blue(RGB) phosphor layers increases regardless of a decrease in the neon plasma emission intensity. Furthermore, the color purity of the red, green, blue(RGB) phosphor layers improve as the neon plasma emission intensity decreases. Accordingly, it is concluded that the optical properties of the phosphor layers, including color purity and luminance, depend on the neon plasma discharge emission as well as the visible emission from the stimulation of the phosphor layers.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.27-34
• /
• 2010

The energy consumption of residential sectors is given a sizable portion in total energy consumption. So, improvement of building performance can be as a part of principal energy strategy. For this reason, an evaluation tool for estimation of energy consumption was developed and supportive policies were considered in this study. In particular, energy saving technology were examined to practice the green home project, among them 7 items were selected as a factor for estimating energy consumption. In addition, to the simulation study on energy consumption, heating load, hot water demand and electric consumption was also studied with actual measured value. Further more, several supportive policies were discussed to encourage green home project in Korea.

• KSBB Journal
• /
• v.4 no.1
• /
• pp.40-47
• /
• 1989

Changes of principal components of crude green tea were determined after 30 min. of heat treatment at 10$0^{\circ}C$, l15$^{\circ}C$, 14$0^{\circ}C$, 16$0^{\circ}C$. Four kinds of free sugars(sucrose, fructose, glucose, raffinose) and an unidentified sugar compound were separated in green tea by using High Performance LiQuid Chromatography (H.P.L.C.). 26-34 peaks were isolated as aroma compounds of green tea by means of Gas Liquid Chromatography(G.L.C). The typical aroma component of green tea such as linalool, furfural, benzyl alcohol and 13 other substances were identified. Contents of most compounds were decreased by heat treatment. Especially contents of free amino acids, free sugars, vitamin C and tannins were decreased remarkably, while those of total nitrogen and soluble nitrogen were hardly changed. The effect of heat treatment on organoleptic quality of tea extracts were examined by sensory evaluation of which result indicated the most favorable tea was produced at 115$^{\circ}C$. The Percentages of loss in contents of total sugars, reducing sugars, vitamin C, free amino acids and tannins at 115$^{\circ}C$ were 17%, 16%, 36%, 12% and 15% respectively, while those were 38%, 53%, 55%, 74% and 23% at 16$0^{\circ}C$.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.252-258
• /
• 2018

A larger energy consumption and concentration of population induced green house gas glowing and heat island effect in the urban space. Roof green system was a effect method to reduce green house gas and heat concentration in the city. Therefore, construction of this system was increasing. Most of lightweight soil used in roof green system was perlite, but this caused dust and skin disease. So it needed to develop another new lightweight soli for roof green system. Meanwhile, a thermoelectric power plant generated bottom ash as a by-product. According to previous research, bottom ash could be used for artificial lightweight soil with 60 wt% of mixing rate. But this study was proceed to develop a artificial lightweight soil using bottom ash with higher mixing rate by 65 wt% and different organic ingredients. First, physical and chemical properties of bottom ash was investigated. Then test according to landscaping design standard was proceeded for various artificial lightweight soil mix types using bottom ash, bark, compost and coco peat. As a result, the artificial lightweight soil with 65% of bottom ash, 30% of bark and 5% of compost was suitable for low and middle range of soil standard.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.665-670
• /
• 2014

Because reducing atmospheric pollution is becoming a serious issue, studies are actively focusing on exhaust gas reduction. This study was conducted to determine the emission characteristics when applying an EGR system, the main approach used for NOx reduction, to an off-road mechanical diesel engine. For the application of the EGR system, the emission characteristics in consideration of the engine conditions were analyzed. The optimum EGR ratio for NOx emission reduction was determined by applying variable EGR conditions for each engine speed condition. Considering the above process, the emission characteristics of the modified EGR condition are compared with those of other conditions (non-EGR and existing EGR condition) in the NRTC mode. Consequently, NOx emission was reduced by around 42 compared with the non-EGR condition when using the modified EGR map.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.159-166
• /
• 2011

Green house gas emissions are increasing as development of the industrial economy of the international community. Many countries in the world are endeavoring to reduce green house gas emissions under severe climate change. In order to protect grobal warming, government is trying to reduce green gas emissions under "Low Carbon Green Growth Policy" and investing climiate-firendly industries such as renewable energy harvesting. Renewable energy has been rapidly developing as a result of investment for development technology of using natural energy such as solar, wind, tidal, etc. There are lots of waste energy in the road space. However, nobody is not interested in waste energy from the road space. This paper present a fundamentally experimental study of energy harvesting technique to use waste energy in the road. The waste energy in the road is covered a pressure and impact of vehicles on the road, the radiant heat from asphalt pavement, road noise and vibration etc. In this study, an energy harvesting device using piezoelectric element is proposed and various tests are conducted to investigate a characteristic of this device as function of impact loading based on piezoelectric effect behavior. This paper shows the energy harvesting results of the device using domestic piezoelectirc element as a function of impact load size and pavement types.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.575-580
• /
• 2020

In this study, we simulated an amine regeneration process with heat-stable salts removal unit. We derived the optimal operating conditions considering the flow rate of waste, the removal rate of heat-stable salts, and the loss rate of MDEA (methyl diethanolamine). In the amine regeneration process that absorbs and removes acid gas, heat-stable salt impairs the absorption efficiency of process equipment and amine solution. An ion exchange resin method is to remove heat-stable salts through neutralization by using a strong base solution such as NaOH. The acid gas removal process was established using the Radfrac model, and the equilibrium constant of the reaction was calculated using Gibbs free energy. The removed amine solution is separated and flows to the heat-stable salts remover which is modeled by using the Rstoic model with neutralization reaction. Actual operation data and simulation results were compared and verified, and also a case study was conducted by adjusting the inflow mass of removal unit followed by suggesting optimal conditions.