• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.581-589
• /
• 2018

This work concentrated on the effect of different laser beams on the microstructure and dielectric properties of $BaTiO_3$ nanoparticles at different calcinations times during the gelling preparation step. The nanoparticles were prepared by the sol-gel method. A green (1000 mW, 532 nm) and red laser beam (500 mW, 808 nm), were applied vertically at the center of stirring raw materials. The samples were sintered at $1000^{\circ}C$ for 2, 4, and 6 h. X-ray diffraction (XRD) analysis showed that samples prepared under the green laser have the highest purity. The FT-IR spectra showed that the stretching and bending vibrations of TiO bond without any other bonds, which are compatible to the X-ray diffraction (XRD) results. Samples were characterized by transmission electron microscopy (TEM), Scan electron microscopy (SEM), and UV-Visible spectrophotometer. Characterization showed the samples prepared under the green laser to have the highest particle size (~ 50 nm) and transparency for all sintering durations. Laser beam effects on electrical characterization were studied. BT nanoparticles prepared under the green laser show the higher dielectric constant, which was found to increase with sintering temperature.

• 산업공학
• /
• 제17권3호
• /
• pp.384-396
• /
• 2004

This paper is concerned with a six sigma green belt training program. Comparative studies of existing training programs for three major companies (Samsung Electronics Company, Hyundai Motor Company, and LG Chemical Ltd.) and two consulting firms (Korean Standards Association and Korea Management Association) are performed. Based on the comparative studies, a cyber green belt training program is developed. The training program, which is composed of 34 modules, follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). This cyber training program is serviced in the homepage http://ise.chonbuk.ac.kr/∼sixsigma. It has been utilized as one semester subject of "Six Sigma Quality Management" in the department of industrial engineering. The advantage and disadvantage of this cyber training program are also discussed.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.180-190
• /
• 2003

실수축 상의 적분 방법에 의한 정확한 closed-form 그린함수를 이용하여 코플래너 도파로의 불연속에 대한 공간영역 full-wave 해석을 하였다. MPIE(Mixed Potential Integral Equation)를 풀기 위한 수치계산 방법으로는 삼각형 요소를 이용한 갤러킨 방법을 사용하였다. 경계면에서 삼각형 요소상의 기저함수로는 선형함수를 사용하였으며, 관측점과 전원점이 일치하는 특이점 근방의 적분 계산을 위해 면적분을 선적분 형태로 바꾸어 피적분 함수의 특이점이 사라지도록 하는 해석적인 방법을 사용하였다. 실수축 적분방법에 의한 그린함수를 이용함으로써 불연속에 대한 정확한 특성을 구하였다.

• ETRI Journal
• /
• 제39권2호
• /
• pp.275-283
• /
• 2017

A green technology for reducing energy consumption has become a critical factor in ICT industries. However, for the telecommunications sector in particular, most network elements are not usually optimized for power efficiency. Here, we propose a novel energy-efficient packet switching method for use in an IP network for reducing unnecessary energy consumption. As a green networking approach, we first classify the network nodes into either header or member nodes. The member nodes then put the routing-related module at layer 3 to sleep under the assumption that the layer in the OSI model can operate independently. The entire set of network nodes is then partitioned into clusters consisting of one header node and multiple member nodes. Then, only the header node in a cluster conducts IP routing and its member nodes conduct packet switching using a specially designed identifier, a tag. To investigate the impact of the proposed scheme, we conducted a number of simulations using well-known real network topologies and achieved a more energy- efficient performance than that achieved in previous studies.

• 한국전자파학회논문지
• /
• 제16권4호
• /
• pp.418-426
• /
• 2005

본 논문에저는 MoM 행렬 요소의 해석적 계산이 가능한 새로운 형태의 closed-form 그린함수 유도를 위한 최적의 근사화 경로 선택을 3-단계 근사화 방법 및 SDP(Steepest Descent Path) 방법을 고려하여 제시하였다. 본 논문의 방법으로 유도된 새로운 형태의 closed-form그린함수 계산 결과가 기존의 방법과 달리 파수 영역 그린함수의 사전조사 없이도 넓은 주파수 범위에서 보다 정확한 결과를 주고 있음을 알 수 있었다. 본 논문이 제안하는 방법의 타당성을 확인하기 위하여 몇 가지 수치 결과들을 제시하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.126-129
• /
• 2006

AC-plasma display panels were examined before and after the aging process to analyze the effect of the aging process. The gas analysis was done to detect the impurity gases out of the MgO film and phosphor by a residual gas analyzer. There were no differences found in the components. The MgO film was analyzed to find out the effect of an ion bombardment due to discharge. The surface roughness of the MgO film was different from regional groups due to the different degree of ion bombardments. XPS analysis showed that the 8 hour aging process was not sufficient to remove $Mg(OH)_2$ and $MgCO_3$ existed on the MgO surface. Photoluminescence measurement showed the small deterioration of blue and green phosphor.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.63-92
• /
• 2001

·EC's/Japanese environmental regulation drive the Pb-free/Halogen-free application ·Most Japanese electronics companies are preparing the green products. ·All items concerning to Pb-free/halogen-free technology should be coparallely designed and developed. ·More works need to clear the unknowns on Pb-free materials ·Need of consensus on materials and standards ·EBM (Environmental Benign Manufacturing)

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 3rd Korea-Japan Advanced Semiconductor Packaging Technology Seminar
• /
• pp.21-50
• /
• 2001

EC's/Japanese environmental regulation drive the Pb-free/Halogen-free application. Most Japanese electronics companies are preparing the green products. All items concerning to Pb-free/Halogen-ree technology should be coparallely designed and developed. More works need to clear the unknowns on Pb-free materials. Need of consensus on materials and standards. EBM (Environmental Benign Manufacturing)

• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.151-155
• /
• 2007

녹색 광 발진을 위해 조화용융조성의 MgO가 첨가된 $LiNbO_3$ 결정을 이용하여 준위상정합 2차 조화파 도파로 소자를 제작하였다. 도메인 반전을 위해 +Z면에 주기적인 전극 패턴을 형성하였으며, 외부전계의 균일한 인가를 위해 LiCl 전해 용액을 사용하여 도메인을 반전 시켰다. 선택적 화학식각을 통해, 약 $6.8{\mu}m$의 분극 반전 주기를 확인 할 수 있었으며, $7{\mu}m$ ridge 높이와 $3{\mu}m$의 slap높이를 갖는 폭 $5{\mu}m$의 PPMgLN ridge-type 도파로 소자의 비선형 특성을 측정하였다.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.29-35
• /
• 2000

전자빔 증착 장비를 이용하여 SrS:Cu,X TFEL 소자를 제작한 후, 발광 특성을 분석하였다. 형광체 모체는 SrS 분말을 사용하였고 발광 중심체로는 Cu, $CuF_2,\;Cu_2S$ 또는 CuCl 등의 미분말을 사용하였다. SrS:Cu,X TFEL 소자의 발광 특성은 부활성제에 따라 매우 많은 변화를 나타내었다. SrS:$Cu_2$ TFEL 소자의 휘도($L_{40}$)와 효율 (${\eta}_{20}$)은 각각 1443 cd/$m^2$와 2.44 lm/w를 나타내었고, 녹색 빛의 발광 효율은 ZnS:Tb TFEL 소자보다 높아 새로운 녹색 형광체로의 활용이 기대되었다. SrS:CuCl TFEL 소자의 휘도($L_{40}$)와 효율(${\eta}_{20}$)은 각각 262 cd/$m^2$와 0.26 lm/w를 나타내었고 청색 빛을 방출하여 새로운 청색 형광체로의 활용 가능성을 확인하였다.