• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.197-199
• /
• 2010

A gravity survey is a base of research earth gravity field determined, perception of the vertical motion, change of Geoid, sea-level changes, climate change etc. Recently, FG-5 was adopted in NGII. NGII has completed 4 points of absolute gravity survey and 1,400 points of relative gravity survey in 2009 to aim to observe 20 points of absolute gravity survey and 6,000 points of gravity control point by 2013. Using results of gravity survey, NGII will provide citizen with data for research about renewal of geoid model and geophysics. This study aims to go over examples of utilization of absolute gravimeter & method of utilization in korea.

• 자원환경지질
• /
• 제28권1호
• /
• pp.79-88
• /
• 1995

The gravity measurment has been carried out at 48 gravity stations with intervals of 1.0~1.5 km along the survey line between Samcheog, Gosari and Taebaek to study subsurface geology and geologic structure in the northeastern part of the Ockchon zone. The Bouguer gravity anomaly values were obtained from the measured gravity values through the gravity corrections. The subsurface geology and geologic structure were interpreted quantitatively by means of the Fourier series method and Talwani method for 2.5 dimensional body. In the study area, the depth of Conrad discontinuity is about 10 km at Samcheog, northeastern end of the survey line, and it is increased rapidly to about 12.5 km at Miro, 15 km at Gosari and 15.5 km at Dongjeom, southwestern end of the survey line, respectively. The depth of the basement of the Ockchon zone exposed at Samcheog is increased smoothly to about 2 km at 5 km from Samcheog along the survey line, and is exposed again in the area between Singiry and Gosari. Beyond Gosari its depth is increased to about 1.7 km, and displaced 2.3 km downward by Osipcheon fault near Dogyeri and 0.5 km by Baeksan thrust near Cheolam, respectively. Many V-shaped low Bouguer gravity anomalies resulted from the fracture zone associated with faults imply the existence of Osipcheon fault and several inferred faults. The low Bouguer gravity anomaly zone between Tongdong and Dongjeom is caused by Jurassic gneissose granite. A local high Bouguer gravity anomaly at 35 km along the survey line from Samcheog is interpreted by the effect of iron deposit of high density existed at subsurface. The thickness of Great Limestone Group varies from 0.5 km to 1.4 km, that of Pyeongan Supergroup from 0.4 km to 0.9 km, and that of Yangdeog Group is about 0.3 km. The thickness of Jurassic gneissose granite varies from 1.5 to 3.0 km.

• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.88-95
• /
• 2010

천부와 광역적인 지체 구조를 해석하기 위하여 일본 혼슈섬 중부에 위치한 노토 반도 연안을 따라 2008년 10월 헬리콥터를 이용한 항공 중력 탐사를 수행하였다. 항공탐사 측선은 총 700 km 정도이며, 세 개의 교차측선을 포함하여 2 km 간격으로 연안에서 20 km 이내에서 수행되었다. 항공탐사를 통해 해석된 부게 이상은 육상탐사와 선상탐사의 결과와 잘 부합하고 있으며, 해안으로 갈수록 중력값이 감소하는 패턴 및 선행연구 결과로 알려진 와지마만의 특성을 잘 보여주고 있어 타당성 있는 항공 탐사 결과임을 확인할 수 있었다. 이번 연구에서 제안하는 항공중력 시스템은 공간적으로 2km 정도의 해상도를 제공해 주고 있다. 항공탐사 결과를 기준변의 자료로 보정해 주기 위하여 항공, 선상, 육상 탐사 결과를 모두 이용하였으며, 이를 위하여 입체각을 이용한 수치 적분을 반복적으로 수행하였다. 최종적으로는 해발 300 m 높이의 중력 이상값으로 계산하였다. 그러나, 선상중력자료와의 자연스러운 자료 통합을 수행하기 위해서는 2-5 mGal 정도의 추가 보정이 필요하였으며, 이를 고려하면, 이번 항공 중력 측정 자료는 2-g mGal 의 오차 범위를 갖는 것으로 판단된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.267-272
• /
• 2007

Uiseong subbasin belonging to Kyungsang basin resulted from volcanic activity in the late Cretaceous. In this study, we carry out MT and gravity survey at the Hwasan caldera, which was formed of volcanic and abyssal rocks complex, then analyze and identify geological substructure. Potential survey such as gravity and magnetic survey has been mainly carried out in former studies, so depth information for understanding substructure was not enough. To complement a potential survey, we use MT method, which has high vertical resolution. Moreover we make a simple 2D model comparing with former study. The result of MT and gravity 2D modeling shows that this area is roughly composed of 3 layers; The bottom layer is a basement. In the second layer, intrusive rocks having high resistivity is placed along the ring faults and the sedimentary layer of low resistivity is inside caldera. The highest layer is alluvium. To comprehend the 3D structure of the Hwasan caldera, we perform 3D gravity inversion, and construct the 3D model from the result of 3D gravity inversion. MT responses are calculated by using the constructed 3D model and the 3D model of the Hwasan caldera's structure is suggested after comparing the calculated values with the observed values at MT line.

• 자원환경지질
• /
• 제24권1호
• /
• pp.63-69
• /
• 1991

Gravity study was carried out to investigate the structure and total mass of the Bupyeong silver deposits closely related to formation of the Bupyeong caldera. Survey region covers $3.3{\times}6.6km^2$ over silver deposits and is comprised of 334 gravity measurement stations. An apparent regional gravity trend parallel to the west coast line is mainly attributed to isostasy. A least square isostasy model was used for the regional correction. A Fortan subroutine was coded to calculate 3-dimensional subsurface model. The calculated gravity values from the 3-dimensional model of the caldera with silver deposits agree with observed anomalies relatively well. Gravity anomaly due to Bupyeong silver deposits reaches to +3.5 mgal from the background value and anomaly due to the caldera reaches to -4 mgal. But the maximum negative anomaly of the caldera would be much greater at its center. The total mass of silver deposits calculated from the subsurface model is $4.19{\times}10^9$ tons. Although the economic part of silver deposits depends on the grade of orebody, we expect that there are still large amount of silver reserves in Bupyeong area.

• 한국지구과학회지
• /
• 제26권7호
• /
• pp.691-697
• /
• 2005

최근에 수행되고 있는 중력 탐사는 고분해능의 중력계와 GPS(Global positioning system)를 통한 정밀한 측정과 측지가 이루어지고 있다. 중력탐사에서 모델링과 역산의 기술은 많은 발전이 있어왔지만, 중력자료처리는 거의 변화가 없었다. 통상적인 정밀한 중력 자료 보정을 통한 부우게이상은 측정점의 고도에서 기준면까지의 물질의 영향을 일정한 밀도를 이용해 제거해 버리기 때문에 측정점 바로 하부의 이상체에 의한 영향을 상당히 왜곡시키게 된다. 본 연구에서는 탐사 지역의 지형을 DEM(Digital Elevation Map) 자료와 Multiquadric equation을 이용하여 실제 지형과 유사한 Multiquadric surface를 자동적으로 구성하고, 이를 블록화 함으로써 보정의 대상이었던 기준면 상부에 대한 밀도를 탐사 지역의 지질 정보와 지형을 포함하는 역산을 통해 수치적으로 계산하였다. 이러한 지형을 포함한 역산 방법을 3차 원중력지형역산(3DGTI; 3-D Gravity Terrain Inversion)이라 한다. 이 연구의 효율성을 검증하기 위하여 주변암과 밀도차가 존재하는 관입지역에 대한 모델을 구성하고 적용한 결과 기존의 부게 보정 방법을 적용한 부게 이상도에 비해 자료의 왜곡이 감소하는 효과를 얻을 수 있었다. 이를 통하여 지형 역산을 통한 객관적인 부게 밀도의 결정과 부게 보정시 실제의 수평적인 밀도 변화를 반영함으로써 기존의 문제점을 보완하였다. 게다가, 3DGTI로부터 얻어진 밀도분포는 지형의 윤곽을 그대로 표현하고 있어서 보다 실질적인 지질을 보여준다고 하겠다. 이 방법을 화강암체가 관입하고 있는 마산$\cdot$창원 일대에서의 중력 탐사 자료에 적용해본 결과 기존 방법보다 관입 화강암체의 위치와 그 규모를 알아내는데 더 효과적이었다. 따라서, 수평적인 밀도 변화가 뚜렷하게 존재하는 지역의 경우, 새로운 중력 자료 처리 방법이 기존의 부게 보정에서 발생하였던 문제점을 해결함으로써 천부의 분해능을 높이고, 심부의 밀도 분포도 좀더 정확하게 계산할 수 있으리라 생각된다.

• 천문학회보
• /
• 제43권1호
• /
• pp.62.2-62.2
• /
• 2018

From the gaussian, near scale-invariant density perturbations observed in the CMB to the late time clustering of galaxies, CDM provides a minimal theoretical explanation for a variety of cosmological data. However accepting this explanation, requires that we include within our cosmic ontology a vacuum energy that is ~122 orders of magnitude lower than QM predictions, or alternatively a new scalar field (dark energy) that has negative pressure. Alternatively, modifications to Einstein's General Relativity have been proposed as a model for cosmic acceleration. Recently there have been many works attempting to test for modified gravity using the large scale clustering of galaxies, ISW, cluster abundance, RSD, 21cm observations, and weak lensing. In this work, we compare various modified gravity models using cosmic shear data from the Deep Lens Survey as well as data from CMB, SNe Ia, and BAO. We use the Bayesian Evidence to quantify the comparison robustly, which naturally penalizes complex models with weak data support. In this poster we present our methodology and preliminary constraints on f(R) gravity.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.49-53
• /
• 2009

본 연구에서는 현재 활발한 연구가 진행되고 있는 고정밀 지오이드 모델 개발에 있어서 중요한 요소 중 하나인 지상중력자료를 획득하기 위해 상대중력계를 이용하여 중력을 측정 하였다. 1등 수준노선 총 58점의 수준점에 대하여 상대중력측량을 실시하였고 이렇게 얻어진 중력값으로부터 지구조석보정 및 기계고 보정 후 자유망조정 방법을 이용하여 중력성과를 계산하였다. 이와 같은 방법을 통해 얻어지는 지상중력자료들은 고정밀 지오이드 모델 개발에 큰 기여를 할 것으로 판단된다.

• 자원환경지질
• /
• 제32권6호
• /
• pp.645-651
• /
• 1999

The gravity and magnetic measurements have been obtained from 34 stations with 50m intervals along the survey line positioned between Jangtanri and sindapri for studying subsurface geology and structures of the volcanic rocks in Yeoncheon area. The Bouguer gravity and magnetic anomaly values were evaluated from the reduction of the field observation, and then interpreted by Nettleton's method and maximum-pepth rules, are approximately 160m based on magnetic data and 135m based on gravity data. High Bouguer gravity anomaly zone between 0m in Jangtanri and 900m along the survery line, is caused by thick and high density, older dasalt which is positioned beneath jijangbong tuff breccia, and this result corresponds to the interpretation result based on magnetic anomly. Lower gravity and magnetic anomaly zones ariund 900m are caused by between 1300m and 1550m are caused by high density of Quarternary basalt exposed in the surface, and lower gravity and magnetic anomalies at 200m and 1250m are caused by faults.

• 대한원격탐사학회지
• /
• 제17권4호
• /
• pp.297-305
• /
• 2001

Ocean satellite altimetry-implied free-air gravity anomalies have had the shortest wavelengths removed during the processing to generate the optimal solution between multiple radar altimeter missions. ERS-1 168day mission altimetry was residualized to a reference geoid surface generated by integrating Anderson & Knudsen’s free-air gravity anomalies for the Barents Sea. The altimetry tracks were reduced and filtered to extract the shortest wavelengths (between 4 and 111 km) from both ascending and descending tracks, respectively. These data were recombined using existing quadrant-swapping techniques in the wavenumber domain to generate a correlated, high frequency gravity field related to the local geologic sources. This added-value surface adjusted the reference free-air gravity anomalies to better reflect features in the gravity field at a wavelength related to the distance between altimetry ground tracks.