• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.364-371
• /
• 2017

Compared to one made of glass, an aluminum mirror features light weight, compact design, low cost, and quick manufacturing. Reflective mirrors and supporting structures can be made from the same material, to improve the athermal performance of the system. With the rapid development of ultraprecise machining technologies, the field of applications for aluminum mirrors has been developed rapidly. However, most of them are rotationally symmetric in shape, and are used for infrared applications. In this paper, the design and manufacture of an off-axis aluminum mirror used for a three-mirror-anastigmat (TMA) optical system at visible wavelengths is presented. An optimized, lightweight design provides a weight reduction of more than 40%, while the surface deformation caused by earth's gravity can meet the required tolerance. The two pieces of an off-axis mirror can be diamond-turned simultaneously in one setup. The centrifugal deformation of the off-axis mirror during single-point diamond turning (SPDT) is simulated through the finite-element method (FEM). The techniques used to overcome centrifugal deformation are thoroughly described in this paper, and the surface error is reduced to about 1% of the original value. After post-polishing, the form error is $1/30{\lambda}$ RMS and the surface roughness is better than 5 nm Ra, which can meet the requirements for visible-light imaging.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.135-139
• /
• 2011

In order to make high-purity ferro-manganese from $Mn_3O_4$ waste dust, the application of aluminothermite process to the reduction of the waste dust was investigated. The mixture from $Mn_3O_4$ dust as metallic source and Al metal powder as the reductant ignited, and reduced with an extremely intense exothermic reaction. The rapid propagation of the aluminothermite reaction occurred spontaneously and stably by ignition of the mixture. The Manganese having some alloy elements emerged as liquids due to the high temperatures reached up to about $2,500^{\circ}C$ and separated from the liquid by their differences of specific gravity. The result of thermite reaction showed the fact that can be obtained high purity ferro-manganese which have over about 90% of manganese content and lower impurities such as C, P, S than those of KS D3712 specification. The recovery of manganese from $Mn_3O_4$ dust was lower level of about 65% than about 75% from manganese ore by electric furnace process, that is due to spatter loss because of its extremely intense thermite reaction. But it will be improved by the process designed to provide CaO as the cooler or to use the Al metal powder having larger particle size distribution.

• 건축역사연구
• /
• 제21권5호
• /
• pp.19-32
• /
• 2012

The purpose of this paper is a study on the dome plan of S. M. del Fiore Church of F. Brunelleschi. The results of study are as follows: 1. The planning of floor, elevation and cross section plan of S. M. del Fiore church is basically planned by each other correlation. In particular, the octangular form of geometrical standard which is formed with altar as the center at the crossing part is important component elements which is decided by not only the dome, but form and size of the drum and floor plan form of the lantern 2. The dome which has been planned by F. Brunelleshi has completed the new dome, preserving gothic thought intended by the church plan after study on architecture of ancient Rome with Pantheon. And the dome which is a main space of church through all aspects of plan, structure, function and construction about the dome is a opportunity in the beginning of Renaissance architecture which is a new epoch and a turning point of architecture on various point of view. 3. The dome which is constructed by F. Brunelleshi has been planned through the innovative solution by the refusal of traditional semicircle form dome, centering use and creation double-shell structure form for the first time in history. And the construction of dome has been solved with the invention of various construction equipments and machineries, the stone rib planned for connection and reinforcement about shells of the octangular form, the support method for reduction the gravity of bricklayers work and the brick work of nock-patterned shape which is masonry construction method of the architecture of ancient Rome.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.481-484
• /
• 2008

본 연구에서는 경제성, 환경부하저감성 및 순환잔골재의 품질개선효과가 우수한 순환잔골재 건식생산기술로서 고속회전충격식 비중분리장치 및 원심력 미분말 집진장치 등으로 구성된 건식생산시스템을 개발하고 각 공정별 건식생산기술의 주요 메커니즘을 규명함으로서 향후 레미콘용, 2차 제품용 등 고부가가치용의 고품질 순환잔골재 활용을 위한 기초자료를 확보하고자 한다. 그 결과 고속회전충격에 의한 순환잔골재의 파쇄작용, 원심력 및 질량차에 의한 미분말과 미세분진의 분리 및 집진작용에의해 순환잔골재의 고품질화에 효과가 있을 것으로 사료된다. 또한 파쇄장치의 효율, 고속회전충격식 비중분리장치 회전날개의 구성, 파쇄분리공정의 배치 등에 따른 연구가 추가적으로 진행되어야 할 것으로 판단되며, 향후 투입된 폐콘크리트의 체계적인 품질관리와 더불어 파쇄장치 및 고속회전충격식 비중분리장치 등의 꾸준한 개선을 통해 순환잔골재 건식생산기술에 의해서도 고품질 순환잔골재의 생산이 가능한 것으로 사료된다.

• 천문학논총
• /
• 제30권2호
• /
• pp.279-281
• /
• 2015

We adopt the PASTEL catalog combined with SIMBAD radial velocities as a testing standard to validate the stellar parameters (effective temperature $T_{eff}$, surface gravity log g, metallicity [Fe/H] and radial velocity $V_r$) from the first data release (DR1) of The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) survey. After applying data reduction and temperature constraints to the sample obtained by cross-identification, we compare the stellar parameters from DR1 and PASTEL. The results show that the DR1 results are reliable under certain conditions. We derive a dispersion of 110 K, 0.19 dex, 0.11 dex and $4.91kms^{-1}$ in specified effective temperature ranges, for $T_{eff}$, log g, [Fe/H] and $V_r$ respectively. Systematic errors are negligible except for those of $V_r$. In addition, for stars with PASTEL [Fe/H] < -1:5, the metallicities in DR1 are systematically higher than those in PASTEL.

• 한국방재안전학회논문집
• /
• 제11권1호
• /
• pp.1-5
• /
• 2018

발전소는 선진 산업사회에서의 중요한 사회기반시설이다. 이러한 발전소가 해초, 물고기, 해파리, 새우 등과 같은 해양생물의 유입으로 정지 될 경우, 사회-경제적으로 심각한 문제가 발생하기도 한다. 따라서, 발전소 취수구 유입구 부분의 해양생물 침투로 인한 발전소 가동이 정지되는 것을 방지하기 위하여, 에어버블 차단막 기술이 활용되고 있다. 본 연구에서는 에어버블 차단막 기술의 기초연구인 에어버블의 거동을 분석하기 위하여 수직형 에어버블 실험장치를 개발 및 에어버블수직 거동 특성을 분석하였다. 에어버블 수직 거동 특성을 분석하기 위하여 수직형 에어버블 실험 장치를 이용하여 에어 분사량에 따른 수심별 에어버블의 상승 속도를 측정하였으며, 실험결과를 바탕으로 수심구간별 에어버블 상승속도 경험식을을 제시하였다. 제시된 경험식은 향후 에어버블 차단막 설계의 기초자료로 활용될 것이며, 발전시설 운영 부분에서의 안정성을 확보하는 데 크게 기여할 것으로 기대된다.

• 박물관보존과학
• /
• 제27권
• /
• pp.91-102
• /
• 2022

철기 문화재 복원에 사용되고 있는 실리카 계열의 무기질 충전제는 열팽창률감소, 흐름성 개선 등의 기능성 부여를 목적으로 사용되고 있다. 그러나 충전제의 양이 많을 수록 복원재의 물성저하 및 황변 현상 촉진의 원인이되며, 결과적으로 재처리로 이어져 유물의 피로도를 상승시키는 결과를 초래한다. 따라서 복원제와 충전제의 혼합 정량화 및 황변성 연구 필요성이 강조될 수 밖에 없다. 이를 보완하기 위해 실리카계 경량 충전제인 Micro Shell을 비교군으로 물성연구를 진행하였다. 실험 결과 기존에 사용하던 충전제에 비해 Micro Shell이 황변도 발생 수치가 최대 34% 낮았으며, 충전제의 배합양에 따라서 공통적으로 접착력과 비중의 물성 수치값이 좋은 것을 확인하였다. 본 연구 결과 Micro Shell의 사용 가능성에 대해 확인하였다.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.55-63
• /
• 2022

A stranded ship means a ship which is stuck on a rock or a seabed, and cannot move by itself. The lightening plan is required to refloat the stranded ship. For this, we have to understand the forces and moments acting on the ship, which is composed of the gravity, buoyancy, and reaction force due to the touched area below the ship. This study defines those forces and moments, and proposed the calculation method to find the posture based on the static equilibrium. It is divided by two steps. In the first step, the magnitude and position of the reaction force are obtained based on the known information such as initial trim angle and draft of the ship. In the second step, the reaction force and the posture is calculated due to the three cases such as addition, reduction, and movement of the cargo. It is applied to three examples in order to calculate the reaction force, and the trim angle due to changes of the cargo. As a results, we successfully obtain the magnitudes and positions of forces acting on the stranded ship and to check the posture of the stranded ship.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.523-530
• /
• 2022

해수의 흐름이 존재하는 방조제 제체 보강공사 시 가장 큰 문제는 재료의 유출로, 콘크리트의 중력식 타설은 원활히 공극을 채우기 어렵고 굳지 않은 콘크리트의 시멘트는 해수에 분산될 확률이 높기 때문에 경화 후 품질의 신뢰성이 저하될 뿐만 아니라, 인근 환경에 악역향을 끼칠 수 있다. 이에 주입이 가능한 겔형태의 주입재가 필요하다, 본 연구에서는 급결성을 띠는 전기로환원슬래그 및 고로슬래그를 활용하여 초기 강도와 해수 침지에 따른 내구성 향상 효과를 평가하였다, 실험 결과 실리카계 약액과의 반응을 통해 흐름성을 갖는 겔형태의 주입재 제조가 가능하였으며 겔의 흐름성은 배합에 따라 105~143 mm 수준으로 현장모사 시험을 통해 외부 유출 없이 공극을 채울 수 있어 현장 적용성을 확인하였다.