• 한방재활의학과학회지
• /
• 제28권4호
• /
• pp.125-130
• /
• 2018

This case report was conducted to introduce the use of miniscalpel-acupuncture for the treatment of hand osteoarthritis. A-76-year old female patient who had pain on both hands due to osteoarthritis was treated with miniscalpel-acupuncture for 7 weeks. The main outcome were the Numeral Rating Scale (NRS) and the grip strength by dynamometer. After miniscalpel-acupuncture treatment, NRS was decreased and the strength of grasp was increased. The result of this study suggests that the treatment of miniscalpel-acupuncture may be effectively used to decrease pain and increase grip strength of patients who suffer from hand osteoarthritis. Further research is necessary by the reason of the limited sample size of this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.181-184
• /
• 2004

The objective of this experimental study is to grasp the effect of replacement level of high-quality recycled aggregate on the properties of high-performance concrete. The mixing types were divided into two series based on containing $0\%\;and\;15\%$ fly-ash. Replacement level of recycled aggregate ranged from $0\%\;to\;100\%$. Test results showed that the initial slump and the fluid velocity were independent on the replacement level of recycled aggregate, and the loss of compressive strength was almost $20\%$ with the recycled aggregate only.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.145-152
• /
• 2000

In simply supported composite beams, the neutral axis of the composite cross section is usually located near the top flange of the steel H-shape, so that the top flange does not impart much strength to the member. This suggests that omitting the top flange entirely could be a means to lower the cost of the beam without greatly reducing the strength. However, It is not easy for inverted T-shaped composite beam to construct and to apply continuous beam which has negative bending moment. As a result, it would get more workability and decrease capability of lateral buckling and local buckling, if the bottom flange of inverted T-shaped steel used as a form. Therefore. the objectives of this study are to investigate strength and behaviors of inverted T-shaped composite beam which web is encased by concrete and to grasp bending capacity and efficiency of composite by comparing and analyzing in test piece.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.27-31
• /
• 2003

최근 박판두재인 고장력강이 구조물에 폭넓게 사용됨으로서 좌굴이 발생하기 쉽다. 특히 고장력강을 사용하는 선체구조물에서는 좌굴은 중요한 설계기준이 되고 있다. 따라서 좌굴발생 후 거동을 정확하게 파악하는 것은 선체구조의 안정성에 중요하다. 본 연구에서는 선체의 대표적인 구조물인 판을 대상으로 각 선급 룰에서 좌굴강도식의 기준으로 삼고 있는 단순지지조건에서의 여러 가지 항복강도에 따라 압축하중을 받는 박판구조물의 초기좌굴 후 거동과 2차좌굴 후 거동에 대해서 규명하였다. 해석방법으로는 범용 유한요소해석 프로그램인 ANSYS를 이용하였고 2차좌굴과 같은 복잡한 비선형거동을 해석하기 위하여 호장증분법(Arc-length method)을 사용하였다.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2141-2147
• /
• 1996

The strength of material is scattered owing to the inhomogenity of microstructure, in spite of the same material. Therefore, in order to design the mechanical structure with the reliability engineering, it is important to grasp the statistical nature of material strength. In this paper, effects of grain sezes for the statistical nature of the fatigue crack growth was discussed. And the statistical nature of mechanical properties was compared with the statistical nature of the fatigue crack growth rate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.41-44
• /
• 2007

Recently, the strenuous industrial waste is scattered and one of the oyster also make the serious environmental contamination. The purpose of this study is investigating an utilization ability as calcium binder of the oyster with Hwang-To according to a rate(10%, 20%, 30%, 40%, 50%). This study grasp physical properties of the oyster powder, bake production of the paste, and conduct the flow test, stiff time test and strength test. According to baking condition, strength of $1000^{\circ}C$(120minutes, rate 30%) is higher than any other condition. The oyster powder from above $900^{\circ}C$ seem possibility as binder hereafter. It is thought that the continuous research will be necessary.

• BMB Reports
• /
• 제51권8호
• /
• pp.369-370
• /
• 2018

In previous studies, memory storage was localized to engram cells distributed across the brain. While these studies have provided an individual cellular profile of engram cells, their synaptic connectivity, or whether they follow Hebbian mechanisms, remains uncertain. Therefore, our recent study investigated whether synapses between engram cells exhibit selectively enhanced structural and functional properties following memory formation. This was accomplished using a newly developed technique called "dual-eGRASP". We found that the number and size of spines on CA1 engram cells that receive inputs from CA3 engram cells were larger than at other synapses. We further observed that this enhanced connectivity correlated with induced memory strength. CA3 engram synapses exhibited increased release probability, while CA1 engram synapses produced enhanced postsynaptic responses. CA3 engram to CA1 engram projections showed strong occlusion of long-term potentiation. We demonstrated that the synaptic connectivity of CA3 to CA1 engram cells was strengthened following memory formation. Our results suggest that Hebbian plasticity occurs during memory formation among engram cells at the synapse level.

• 지질공학
• /
• 제13권3호
• /
• pp.335-344
• /
• 2003

본 연구에서는 전라남도 장성과 화순에 분포하는 석회암풍화토의 물성 및 전단 특성을 연구하였다. 석회암풍화토의 교란시료에 대한 물성 및 전단 특성을 파악하기 위하여 실내 시험이 수행되었다. 연구지역의 석회암풍화토에 대한 물성 및 전단 특성은 다음과 같다 비중(Gs)은 2.78~2.80, 액성한계(LL)는 37~38(%), 소성지수(PI)는 13.7~15.4이며 흙의 분류(USCS)는 CL에 해당된다. 불포화 시료의 직접전단시험 (vd, $1.5t/\textrm{m}^3$)에 의한 강도정수는 점착력(c)이 3.07~4.4 ($t/\textrm{m}^2$) 그리고 내부마찰각($\Phi$)은 $34.8~42.4^{\circ}$의 범위를 보인다. 화강암풍화토 (양, 1997; 문. 1998; 박, 1998)와 비교해 보면, 연구지역의 석회암 풍화토의 물리적 특성은 일반적으로 차이를 보이며, 전단 강도정수 중, 내부마찰각은 대체적으로 유사한 경향을 보이는 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제18권8호
• /
• pp.17-21
• /
• 2017

본 논문은 암석 및 콘크리트 등의 건설재료의 비파괴 압축강도를 산정하기 위하여 재료타격 시 발생하는 임팩에코 응답신호를 모두 측정하고 이를 누적한 전체 사운드 신호에너지의 이용성에 관해 파악하고 그 결과를 제시하는 것이다. 본 연구에서는 이를 위해서 타격장치를 고안하였고 이를 이용하여 재료를 회전 자유낙하에 의해 초기 타격토록 하고 이후 반발작용에 의한 반복타격이 소멸될 때까지 발생할 수 있도록 하였다. 본 연구에서는 서로 다른 강도를 가지도록 배합된 콘크리트 시편에 대하여 실험을 실시하고 임팩에코 응답신호를 측정하였다. 시편별 산정된 전체 사운드 신호에너지는 직접압축강도시험을 통한 시편별 압축강도와 상호 비교하였다. 비교결과, 임팩에코 응답신호를 통해 산정된 전체 사운드 신호에너지는 시편의 직접압축강도와 직접적인 관계가 있다는 것을 확인하였으며, 이를 통해 암석 및 콘크리트 등의 건설재료의 압축강도는 재료타격 시 발생하는 임팩에코 응답신호로부터 산정된 전체 사운드 신호에너지를 이용하여 비파괴적으로 산정할 수 있음을 알 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.156-161
• /
• 2003

Mechanical behavior of rock joints usually can be characterized by small-scale laboratory shear tests due to economical and technical limitations, but their applicability to the behaviour of rock mass has been always questioned by a number of researchers because of scale effect. Though there have been several researches regarding the scale effect, it has been a controversial problem how to apply the result of small-scale laboratory shear test directly to field design from different conclusions among researchers. In order to grasp the trend of scale effect of shear behavior, a series of direct shear tests on replicas of natural rock joint surfaces made of gypsum cement with different size and roughness were conducted and analyzed. Result showed that as the size of the specimen increased, average peak shear displacement increased, but average shear stiffness and average peak dilation angle decreased. As for the dependency of scale on shear strength, the degree of scale effect was dependent on normal stress and roughness of rock joint. For the condition of low normal stress and high roughness, decrease of average peak shear strength with increasing size of joint was evident.