• Journal of Electrochemical Science and Technology
• /
• 제2권2호
• /
• pp.116-123
• /
• 2011

Herein, a novel preparation method of highly homogeneous carbon-silicon composite materials was presented. In contrast to conventional solvent evaporation method, a milled silicon-graphite or its oxidized material were directly reacted with petroleum-derived pitch precursor. After thermal reaction under high pressure, pitch-graphite-silicon composite was prepared. Carbon-graphite-silicon composite were prepared by an air-oxidization and following carbonization. From energy dispersive spectroscopy, it was observed that small Si particles were highly embedded within carbon, which was confirmed by disappearance of Si peaks in Raman spectra. Furthermore, X-ray diffraction and Raman spectra revealed that carbon crystallinity decreased when the strongly oxidized silicon-graphite was added, which was probably due to oxygen-induced cross-linking. From the anode application in lithium ion batteries, carbon-graphite-silicon composite anode displayed a high capacity ($565\;mAh\;g^{-1}$), a good initial efficiency (68%) and an good cyclability (88% retention at 50 cycles), which were attributed to the high dispersion of Si particles within cabon. In case of the strongly oxidized silicongraphite addtion, a decrease of reversible capacity was observed due to its low crystallinity.

• Carbon letters
• /
• 제10권4호
• /
• pp.300-304
• /
• 2009

Thermal emissivity of nuclear graphite was measured with its oxidation degree. Commercial nuclear graphites (IG-110, PECA, IG-430, and NBG-18) have been used as samples. Concave on graphites surface increased as its oxidation degree increased, and R value (Id/Ig) of the graphites decreased as the oxidation degree increased. The thermal emissivity increased depending on the decrease of the R (Id/Ig) value through Raman spectroscopy analysis. It was determined that the thermal emissivity was influenced by the crystallinity of the nuclear graphite.

• Composites Research
• /
• 제26권4호
• /
• pp.254-258
• /
• 2013

본 연구에서는 폴리프로필렌과 다양한 탄소나노소재를 사용하여 제조한 복합재의 압출방향 및 권취속도에 따른 기계적 물성과 결정화도에 대한 연구를 수행하였다. 폴리프로필렌에 탄소나노소재를 균일하게 분산시키기 위해 미분쇄기에 폴리프로필렌 분말(<700 ${\mu}m$)과 탄소나노소재를 혼합한 후 나노복합재 필름 제조를 위해 압출기를 사용하였다. 나노복합재 필름의 결정화도를 분석하기 위해 differential scanning calorimetry를 이용하였다. 기계적 물성을 인장시험을 통해서 측정한 후 순수 폴리프로필렌 물성과 비교하였고, 압출 시 필름 권취속도에 대한 나노복합재 결정화도의 차이를 확인하였다. 탄소나노소재를 첨가함으로써 고분자 필름의 기계적 물성이 향상됨을 확인하였고, 그에 따른 결정화도 역시 증가하는 것을 확인하였다. 반면, 권취속도가 증가 할수록 압출물의 냉각속도도 역시 증가함으로써 결정화도가 오히려 감소함을 확인하였다.

• 공업화학
• /
• 제32권2호
• /
• pp.174-179
• /
• 2021

인조흑연 제조용 바인더로 주로 이용되는 콜타르 핏치와 페놀 레진은 soft carbon 및 hard carbon의 초기 탄소화합물 구조에 차이가 있다. 따라서 탄화 온도에 따른 열분해 거동, 미세조직, 결정성의 변화 과정도 다를 것으로 예상할 수 있다. 본 연구에서는 콜타르 핏치 및 페놀 레진의 열분해 거동, 미세조직, 결정성 변화에 관하여 비교 분석하였다. 콜타르 핏치는 액상을 경유한 탄화 과정을 거치며, 탄화 온도가 증가함에 따라 미세조직이 점차 변화되는 것을 확인할 수 있었다. 탄화 온도가 증가함에 따라 콜타르 핏치 및 페놀 레진 모두 결정성은 증가하는 경향을 나타냈지만, 콜타르 핏치는 미세조직이 급변하는 500 및 600 ℃ 구간에서 결정성도 급격히 변화는 것을 확인할 수 있었다. 또한 미세조직과 결정성은 서로 밀접한 연관성이 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.449-452
• /
• 2012

A polyaniline-gold composite was prepared via the polymerization of aniline hydrochloride with or without water-soluble graphite oxide using auric acid as an oxidant. The reaction products were characterized using Xray photoelectron spectroscopy. The thermal stability and embedded crystallinity of the composites were also investigated using thermogravimetric and X-ray diffraction analyses. The electrical properties of the composites were examined using cyclic voltammetric measurements at room temperature and temperature-dependent DC conductivity within 300-500 K. Compared to pure graphene oxide and polyaniline-gold composite, the polyaniline-gold-graphene composite exhibited higher crystallinity and thermal stability, and higher current density response under equivalent conditions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.302.1-302.1
• /
• 2014

We report the growth of high quality zinc oxide (ZnO) thin films on amorphous glass substrates and their structural and optical characteristics. For the growth of ZnO films, mechanically exfoliated ultrathin graphite or graphene layers were used as an intermediate layer because ZnO does not have any heteroepitaxial relationship with the amorphous substrates, which significantly improved the crystallinity of the ZnO films. Structural and optical characteristics of the films were investigated using scanning and transmission electron microscopy, x-ray diffraction, and variable temperature photoluminescence spectroscopy. High crystallinity and excellent optical characteristics such as stimulated emission were exhibited from the high quality ZnO films grown on glass substrates.

• 대한화학회지
• /
• 제13권4호
• /
• pp.395-399
• /
• 1969

On the soft carbon made from petroleum coke, it was found that the graphitization began at around 2,000$^{\circ}C and crystallite diameters were almost saturated at 2,400$^{\circ}C., and that the molecular planes were difficult to arrange into an ideal graphite lattice in spite of the saturation of crystallinity by heat treatment temperature. On the hard carbon made from cross-linked thermosetting plastics, phenol-formaldehyde filler and phenol-benzaldehyde binder, it was very difficult to rotate the molecular planes into a regular directional arrangement and into a consecutive order corresponding to the large graphite crystals. In addition to the above mentioned crystallinity, it was also determined in relation to electric conductivity, resistivity, hardness and apparent density of carbons.

• 공업화학
• /
• 제33권1호
• /
• pp.58-63
• /
• 2022

흑연은 낮은 탈/리튬화 전압, 372 mAh/g의 높은 이론 용량, 낮은 가격 및 긴 수명 특성을 가져 지난 30년 동안 리튬이 온전지 음극 재료로 활용되었다. 최근 무기 고체 재료로 구성되어 높은 안정성을 가지는 전고체 리튬이온전지는 전기자동차 및 차세대 에너지 저장 장치로 엄청난 주목을 받고 있지만, 전고체 리튬이온전지 시스템에 잘 구동되는 흑연 연구는 부족한 실정이다. 그래서 우리는 탄소재료 표면에 존재하여 저항층으로 작용하는 비정질 탄소를 흑연으로부터 제거하여 흑연의 전기전도도 향상을 통해 황화물계 전고체 전지 음극 흑연 재료의 성능 향상을 유도했다. 400, 500 및 600 ℃ 공기 열처리된 흑연의 X-ray diffraction (XRD) 분석 결과, (002) 피크 반치폭(FWHM)이 bare 흑연보다 줄어들어 열처리 후 흑연의 결정성이 향상됨을 보였다. 또한 열처리 후 흑연의 결정성이 증가할수록 방전 용량, 초기 쿨롱효율(ICE) 및 수명 특성이 증가함을 확인했다. 500 ℃ 공기 열처리 한 흑연의 경우 331.1 mAh/g 및 ICE 86.2%와 10사이클 수명 측정 후 92.7%의 높은 용량 유지율을 나타내었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.713-718
• /
• 1997

Polyaniline free standing films cast from N-methyl-2-pyrrolidinone(NMP) solution, camphorsulfonic acid(HCSA), dodecylbenzensulfonic acid(HDBSA), inorganic matter(carbon black, graphite) and metal(silver) were prepared by processings. The properties of these films such as crystallinity, near-infrared absorption spectra and conductivity were investigated. The HCSA and HDBSA doped polyaniline films cast from m-cresol and chloroform solvents showed the metallic property and high crystallinity, respectively. The value of conductivity in the HCSA doped polyaniline film obtained 180 S/cm. We have obtained the value of conductivity 200 S/cm in the metal(silver) doped polyaniline film, which is higher than that of the HCSA doped polyaniline film. The metal(silver) doped polyaniline film shows good properties as a electromagnetic shielding material.

• Carbon letters
• /
• 제26권
• /
• pp.112-116
• /
• 2018