• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.327-335
• /
• 2000

The spent fuel rod extracting machine is automatically operated in high radioactive environment, so high reliability of operation is required. In this paper, to enhance the reliability of this machine by providing a close monitoring capability. a real time graphic simulation method is suggested. This method utilizes conventional IGRIP (Interactive Graphics Robot Instruction Program) 3D graphic simulation tool to visualize and simulate the 3D graphic model of this machine. Also, the dedicated protocol is defined for transmission of the operational data of the machine. The real time graphic simulation is realized by developing the socket module between a graphic workstation and a machine control computer through the TCP/IP network and by dividing the 3D graphic simulation GSL(Graphic Simulation Language) program as a small sized sub routine. The suggested method is implemented while automatically operating the rod extracting machine. The result of implementation shows that the real time 3D graphic simulation is well synchronized with the actual machine according to the operational data.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.55-65
• /
• 2003

A novel evaluation method is investigated for UV curing process in printing system. The method is based on the measurement of conducivity change by the photopolymerization of UV curable inks and paints. It is found that the decrease of conductivity is caused by photopolymerization of epoxy monomer during UV curing process of ink film and the by the rate of UV curing. It is possible to make the dynamical evaluation the curing rate of UV curable ink in curing process by this method.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.39-52
• /
• 2004

A novel evaluation method is investigated for measuring the ability of acid amplification of acid amplifier. The method is based on the measurement of conductivity change by the acid generation according to UV radiation. It is found that the decrease of conductivity is caused by photopolymerization of epoxy monomer during UV curing process of ink film and the by the rate of UV curing. In this paper, the novel acid amplifiers were synthesized and measured thermal stability by means of DSC. It was found that mono-type acid amplifiers were more stable than di-type. It is possible to make the dynamical evaluation the curing rate of UV curable ink in curing process by this method.

• 한국인쇄학회지
• /
• 제4권1호
• /
• pp.43-55
• /
• 1986

• 한국인쇄학회지
• /
• 제5권1호
• /
• pp.1-10
• /
• 1987

This paper proposes a design for the software of Graphic system for CAD/CAM, Particularly, 2D Graphic system is studied.The implemention has been tested by GSS PC24 computer and GW-BASIC is used as program language.The system is designed with basic modules of CAD using Top-down method.

• ETRI Journal
• /
• 제25권5호
• /
• pp.288-296
• /
• 2003

In this study, we present a 260k color TFT LCD driver chip set that consumes only 5 mW in the module, which has exceptionally low power consumption. To reduce power consumption, we used many power-lowering schemes in the logic and analog design. A driver IC for LCDs has a built-in graphic SRAM. Besides write and read operations, the graphic SRAM has a scan operation that is similar to the read operation of one row-line, which is displayed on one line in an LCD panel. Currently, the embedded graphic memory is implemented by an 8-transistor leaf cell and a 6-transistor leaf cell. We propose an efficient scan method for a 6-transistor embedded graphic memory that is greatly improved over previous methods. The proposed method is implemented in a 0.22 ${\mu}m$ process. We demonstrate the efficacy of the proposed method by measuring and comparing the current consumption of chips with and without our proposed scheme.

• 한국인쇄학회지
• /
• 제20권2호
• /
• pp.69-83
• /
• 2002

This research attempts on plate making for gravure. Direct Hard Dot Method, Helio Kliso Graph, and Laser TB Dot; these three method are the most popular in Korea. For examining ink transmission, three plates were made in the above three different way for the same manuscript and were printed under the same condition. After printing speed was also varied into 150line/inch, 175line/inch, and 200line/inch, ink transmission was examined too. After printing the same manuscript with the above three method then the researcher examined level of ink transmission. Printing lines shows that Laser TB Dot Method and Direct Hard Dot Method were favorable level, while there was big differences of state of Helio Kliso Graph plate.

• 한국게임학회 논문지
• /
• 제12권5호
• /
• pp.5-12
• /
• 2012

그래픽으로 표현된 정보는 컴퓨터게임에 익숙한 게임세대들에게 정보를 인지하는데 텍스트보다 선호하는 스타일이다. 또한 수학교육에 있어서도, 그래픽으로 표현된 수학문제를 통해 해를 찾는 학습은 학습자들에게 문제해결 능력을 향상시키는 데 뚜렷한 효과가 있다고 한다. 본 논문에서는 게임세대인 학습자들의 효과적인 학습을 위해, 수학문장을 그래픽적으로 표현하는 방법을 제안하였다. 제안하는 방법은 가시성이 우수한 그래픽 요소들을 사용하여 단위정보를 논리적인 구조로 배치하고 단위 정보들 사이의 논리적인 연관성을 기호, 선분, 또는 화살표로 표현하여 게임세대들이 문장의 내용을 인지하지 쉽고 논리적으로 정확하게 이해할 수 있다. 기존의 수학문장의 그래픽표현방법과 달리 제안하는 방법은 문장의 시제와 태까지도 정확하게 표현할 수 있다. 제안하는 방법은 게임세대인 학습자들에게 효과적인 수학학습이 이루어질 수 있도록 학습도구로 사용될 수 있고 또 수학교육용 컴퓨터게임의 학습 스캐폴딩 기능을 위해 사용되는 수학정보의 그래픽표현을 위해 널리 활용될 수 있다.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.72-82
• /
• 2002

This paper presents the design technology of a Graphic Generator which drives the embedded aircraft display equipments such as HUD(Head-Up Display) and MFD (Multi-Function Display) those provide pilot with the most important mission information. The main issue of this design is how we can implement the real-time embedded graphic generator using a general purpose processor as a substitute for the obsolete the production of specific graphic processor in the military market. So we proposed two kinds of method that one is a software solution so called graphic kernel system, interpreting the display file, controlling the graphic system and pre-processing graphic primitives, the other is a hardware solution so called graphic engine, interpreting passed commands through the graphic kernel system, post-processing the looping calculation taking much of time as implemented by software. We have tested and verified the functionalities and the required performance of Graphic Generator.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.