Journal of the Korean Graphic Arts Communication Society (한국인쇄학회지)
- Volume 22 Issue 1
- /
- Pages.39-52
- /
- 2004
- /
- 1226-1149(pISSN)
A new evaluation method of UV curing process by using electrical properties(II)
전기적 특성을 이용한 UV 경화 프로세스에 대한 새로운 평가방법(II)
- Lee, Mun-Hak (Department of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
- Kim, Sung-Bin (Division of Image and Information, College of Engineering, Pukyong National University) ;
-
Lee, Tae-Hoon
(Department of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
- Ryu, Jong-Yi (Department of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
- Kim, Tae-Hoon (Department of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
- Son, Se-Mo (Division of Image and Information, College of Engineering, Pukyong National University)
- 이문학 (부경대학교 대학원 인쇄공학과) ;
- 김성빈 (부경대학교 공과대학 화상정보공학부) ;
-
이태훈
(부경대학교 대학원 인쇄공학과) ;
- 류정이 (부경대학교 대학원 인쇄공학과) ;
- 김태훈 (부경대학교 대학원 인쇄공학과) ;
- 손세모 (부경대학교 공과대학 화상정보공학부)
- Published : 2004.03.01
Abstract
A novel evaluation method is investigated for measuring the ability of acid amplification of acid amplifier. The method is based on the measurement of conductivity change by the acid generation according to UV radiation. It is found that the decrease of conductivity is caused by photopolymerization of epoxy monomer during UV curing process of ink film and the by the rate of UV curing. In this paper, the novel acid amplifiers were synthesized and measured thermal stability by means of DSC. It was found that mono-type acid amplifiers were more stable than di-type. It is possible to make the dynamical evaluation the curing rate of UV curable ink in curing process by this method.
Keywords