• 한국결정성장학회지
• /
• 제30권5호
• /
• pp.183-188
• /
• 2020

에어로졸 증착법에 의해서 상온에서 5~10 ㎛ 두께의 PZN-PZT(0 %, 20 %, 40 %) 복합체의 막을 실리콘/사파이어 기판 위에서 제조하였다. PZN의 농도는 0 %, 20 % 및 40 %까지 첨가하였다. 실리콘기판 및 사파이어 기판 위에서 증착된 막은 전기로에서 700℃ 및 900℃에서 각각 어닐링처리 하였으며 900℃에서 어닐링한 경우의 잔류분극 및 유전 상수 등의 전기적 특성이 700℃에서의 특성보다 우수하였다. 특히 900℃에서 어닐링한 2PZN-8PZT 막의 경우 1200℃에서 소결한 같은 조성의 벌크재에서 얻은 값과 상호 비교하였다. 열처리 온도가 높아짐에 따라 유전상수가 증가하는 경향을 보이는데 이는 후열처리에 따른 막의 결정성의 향상과 입자 성장으로 기인한다.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.301-307
• /
• 2020

In this study, factors considered to be causes of promotion of densification of sintered pellets identified during phase change are reviewed. As a result, conclusions shown below are obtained for each factor. In order for MA powder to soften, a temperature of 1,000 K or higher is required. In order to confirm the temporary increase in density throughout the sintered pellet, the temperature rise due to heat during phase change was found not to have a significant effect. While examining the thermal expansion using the compressed powder, which stopped densification at a temperature below the MA powder itself, and the phase change temperature, no shrinkage phenomenon contributing to the promotion of densification is observed. The two types of powder made of Ti-silicide through heat treatment are densified only in the high temperature region of 1,000 K or more; it can be estimated that this is the effect of fine grain superplasticity. In the densification of the amorphous powder, the dependence of sintering pressure and the rate of temperature increase are shown. It is thought that the specific densification behavior identified during the phase change of the Ti-37.5 mol.%Si composition MA powder reviewed in this study is the result of the acceleration of the powder deformation by the phase change from non-equilibrium phase to equilibrium phase.

• 한국토양환경학회지
• /
• 제5권3호
• /
• pp.25-33
• /
• 2001

새만금 간척으로 인해 변화된 조류흐름이 갯벌의 조성에 미치는 영향을 조사하였으며, 이에 따른 물리적 특성이 중금속의 오염도에 미치는 영향을 분석하였다. 또한 회분실험을 통하여 중금속의 종류와 농도 변화에 따른 흡착특성을 알아보고, 흡착등온식을 적용시켰다. 분석결과에 따르면, 해류의 흐름변화로 강 하구 부분에 퇴적현상이 일어나고 있었으며, 이 현상은 중금속의 함량에 영향을 미치고 있었다. 특히 입도 분포와 유기물 함량 그리고 양이온 치환능력의 영향이 크게 작용하고 있음을 알 수 있었다. 중금속 흡착능력은 30분 이내에 주입농도의 90%이상이 흡착되는 것으로 나타났다. 그러므로 새만금의 흐름 양상은 토양 입도를 변화시킬 것이며, 역시 중금속의 흡착능력의 변화가 일어날 것이다.

• 대한가정학회지
• /
• 제29권2호
• /
• pp.87-120
• /
• 1991

The purpose of this study was to identify the design characteristics of the multi-leveled chest(jang) which was the main furniture of the master bedrom(anbang) in the Chosun Dynasty. The major findings and conclusions were: 1. The front view of the multi-leveled chest were composed of a protruded top panel(kaepan), drawers, folded doors, sectional panels(chwibyok kan and morum kan) and base stand(madae) in general. Variety in the front view found more frequently in single level chests than bi- or tir-level chests. 2. The overall dimensions of each type of chest increased with increase in number of levels, but the height of the sectional parts decreased. That is, the overall proportion of the single level chests were 10 : 9, bi-level chests were 5 : 6, and tri-level chests were 2 : 3. The proportion of 1 : 1, 4 : 5, 1 : 3, 1 : 4, 1 : 5 were found often in the sectional parts such as drawers, doors, chwibyok kans and morum kans. 3. In general, the surface treatments were subtle. Carved or inlayed ornamentation were seldom seen, and most chess were finished with clear lacquer to show the natural wood grain. There were no distinctive characteristics of surface ornamentation characteristic of any one type of chest. 4. The general patterns of the metal ornaments were spade(yowidu), round, bow, rectangular(yakgua), bat and flower shapes. The multi-level chests were decorated with more metal ornament types compared with the single-level chests. 5. In conclusion, there was more variety in all the design elements in the single level chests compared with the other types of chests. The bi-and tri-level chests were quite stylized in composition, size, proportion, surface treatment, and metal ornamentation.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.114-125
• /
• 1997

The purpose of this study is to clarify the geological occurrence, mineralogical, physico-chemical and thermal properties of the sericite ore which located in Chungha area, Kyungsangbuk-do. The geology of this area are composed mainly of hornfels and some felsite porphyry. The sericitic ore is classified into sericite, sericite-quartz and quartz-sericite ore according to mineral assemblages. Mineral components in sericite ore are mainly sericite with minor quartz, apatite, sphene, zircon, ilmenite, bismuthinite, iron oxide and etc. Sericite-quartz ore are mainly composed of sericite and quartz. Accessary minerals are muscovite, epidote, zircon, sphene, iron oxide and etc. The chemical compositions of K2O, Al2O3, & Ignition loss in sericite and sericite-quartz ore increase than that of the host rock, while the composition of SiO2, Na2O & Fe2O3 decrease. Sericite and sericite-quartz ore are characterized by the specific gravity of 2.35 and 2.44, the pH of 4.36 cP and 2.36 cP respectively. The result of size analyses of sericite ore is 11.3% in grain volume concentration between 12.9 $\mu\textrm{m}$ and 11.1$\mu\textrm{m}$, and 32.3% between 9.6$\mu\textrm{m}$ and 12.9$\mu\textrm{m}$. The thermal expansivity of sericite and sericite-quartz ore show the similar pattern. The sericite ore shows the thermal expansivity of 0.31% at 50$0^{\circ}C$, 0.39~0.75% at 600~1,00$0^{\circ}C$ and 0.74% at 1,10$0^{\circ}C$. The sericite-quartz ore show the thermal expansivity of 0.29% at 50$0^{\circ}C$, 0.36~0.72% at 600~1,000% and 0.71% at 1,10$0^{\circ}C$.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 1999

In this study we investigated the effects of process variables on the bond strength, and its dependency upon the interfacial chemistry when the joined $ZrO_2$ toughened $Na\beta$"-alumina to $\alpha$-alumina using B$_2$$O_3$-$SiO_2$-Al$_2$$O_3$-CaO glass sealant. We observed that bond strength is mainly determined by the strength of the glass, which, in turn, depends on the glass composition established after joining reaction. Joining at $950^{\circ}C$ for 15min yielded the highest average bond strength of 66MPa. Different types of interfacial reaction seem to occur at each interface. After joining at $950^{\circ}C$ for 15min we found that Ca and Si diffuse much deeper(~15$\mu\textrm{m}$) into the $\beta$"-alumina composite than into the $\alpha$-alumina(<1$\mu\textrm{m}$) as a result of ion exchange reaction and more effective grain boundary diffusion. Thermal expansion coefficient of the glass was found to have changed more closely to those of the $\beta$"-alumina composite and $\alpha$-alumina, which put the glass under a slight compressive stress.ressive stress.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.550-554
• /
• 2009

Unreported dielectrics based on the binary system of MgO-SiO$_2$ were investigated as potential candidates for microwave dielectric applications, particularly those demanding a high fired density and high quality factors. Extensive dielectric compositions having different molar ratios of MgO to SiO$_2$, such as 2:1, 3:1, 4:1, and 5:1, were prepared by conventional solid state reactions between MgO and SiO$_2$. 1 mol% of V$_2$O$_5$ was added to aid sintering for improved densification. The dielectric compositions were found to consist of two distinguishable phases of Mg$_2$SiO$_4$ and MgO beyond the 2:1 compositional ratio, which determined the final physical and dielectric properties of the corresponding composite samples. The increase of the ratio of MgO to SiO$_2$ tended to improve fired density and quality factor (Q) without increasing grain size. As a promising composition, the 5MgO.SiO$_2$ sample sintered at 1400 $^{\circ}C$ exhibited a low dielectric constant of 7.9 and a high Q $\times$ f (frequency) value of $\sim$99,600 at 13.7 GHz.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.313-319
• /
• 2017

일반적으로 플라이애시의 입도, 화학성분, 비정질양, 비정질 Si, Al 양등 매우 다양한 요인이 시멘트와의 반응에 영향을 미치고 있다. 본 연구에서는 플라이애시의 입자 특성이 압축강도에 미치는 영향을 확인하고자 한다. 표준사를 플라이애시와 유사한 입도로 분쇄하여 플라이애시와 동일하게 시멘트와 배합하여 압축강도를 측정하였다. 측정된 압축강도 결과 값을 사용하여 시멘트 수화반응에 의한 강도와 입자 충진 효과에 의한 강도 증진을 확인하였다. 표준사 분말을 치환한 모르타르의 압축강도 결과를 활용하여 플라이애시의 포졸란 반응에 의한 강도 증가분을 계산하였다. 이러한 결과 값과 플라이애시의 입자 특성을 비교한 결과, 분말도는 압축강도와 약한 상관성을 보이고 있으며, PI(Pozzolanic Index)는 10% 통과직경(D10)과 50% 통과직경(D50)과 좋은 상관관계를 나타내었다. 따라서 향후 PI와 D10과의 상관성은 플라이애시의 화학적 특성과 함께 플라이애시 특성을 파악하는 좋은 수단이 될 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.589-593
• /
• 2014

AlNO multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. $Al_2O_3$/AlNO(LMVF)/AlNO(HMVF)/Al/substrate of 4 multi-layer has been prepared in an Ar and ($N_2+O_2$) gas mixture, and $Al_2O_3$ of top layer is anti-reflection layer on double AlNO(LMVF)/AlNO(HMVF) layers and Al metal of infrared reflection layer. In this study, the roughness and surface properties of AlNO thin films were estimated by field emission scanning electron microscopy(FE-SEM). The grain size of AlNO thin films increased with increasing sputtering power. The composition of thin films has been systematically investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The absorptance of AlNO films shows the increasing trend with swelling ($N_2+O_2$) gas mixture in HMVF and LMVF deposition. The excellent optical performance showed above 98% of absorptance in visible wavelength region.

• Journal of Nutrition and Health
• /
• 제45권4호
• /
• pp.303-314
• /
• 2012

The purpose of this study was to investigate the relationship between dietary fat intake, anthropometric data, blood lipids, C-reactive protein, and adiponectin in Korean male college students. Forty-eight subjects were divided into 2 groups based on dietary fat intake: UERF (under 30% of energy ratio for fat source), AERF (above 30% of energy ratio for fat souce). We collected dietary intake data using 24-hour dietary recall for 3 days. Anthropometric and biochemical parameters were measured by using standard methods. Segmental body composition analysis was carried out using an 8-electrode multifrequency bioelectrical impedance method of body fat estimation. There was no significant difference in anthropometric data and serum lipid profile between UERF and AERF group. Serum C-reactive protein level was significantly higher in the AERF group compared to the UERF group. Although there was no significant difference in serum adiponectin level between UERF and AERF groups, subjects had lower adiponectin levels. Correlation data show that serum adiponectin level was positively correlated with vegetable intake (p < 0.05). In addition, dietary fat intake had a positive correlation with meat (p < 0.01), whereas a negative correlation with grain (p < 0.01), vegetables (p < 0.05), and fish (p < 0.05). These results suggest that the increased fat intake of non-obese Korean male college students is associated with their increased serum C-reactive protein concentration. Therefore, proper guidelines on fat intake and nutrition education are necessary for the prevention and management of metabolic syndromes.