• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.43-50
• /
• 1995

The grafting of methacrylonitrile(MAN) onto Kevlar 49 filament surface was carried out by anionic polymerization using sodium methylsulfinylcarbanion formed from sodium hydride and dimethyl sulfoxide(DMSO). The effects of reaction conditions on the grafting percentage(GP) and on the tensile strength of the fiber were investgated. GP marktedly increased with increasing metalation time, and NaH concentration, polymerization temperature and time. The tensile strength of fiber decrased with increasing metalation time, and NaH concentration, polymerization temperature and time. The optimum conditions to increase over 40% of GP with below 10% reduction rate of tensile strength of fiber : NaH concentration ; 30.6 mmol/l/0.5g Kevlar, metalation time : 10min, polymerization tempera- ture : 5$0^{\circ}C$, polymerization time: 20 sec, monomer concentration : 1.12mol/l/0.5g Kevlar.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.268-274
• /
• 2015

In this paper, the isothermal crystallization kinetics of a functional PP (FPP) with different grafting yields (GY)-methacryloxyethyltrimethyl ammonium chloride (DMC) grafted PP were investigated by differential scanning calorimetry (DSC). The results showed that the crystallization rate of FPP (GY=4.83%) was the highest for all of the studied samples. Furthermore, for the FPP with different GY, the value of $t_{1/2}$ became longer with increasing the grafting yield (GY). The possible explanation was that the quaternary ammonium groups introduced affected the crystallization process of the FPP in two opposite directions, i.e. promoting the nucleation and hindering the transport of the chain molecules towards the growing nuclei. Polarized optical micrographs showed that the DMC chains acted as nucleating agents, which accelerated the nucleation. In addition, the results showed the FPP had lower nucleation free energy than the PP. This study would be useful for designing the processing parameters of the grafted samples.

• Nuclear Engineering and Technology
• /
• v.9 no.2
• /
• pp.65-74
• /
• 1977

The radiation-induced graft polymerization of acrylic acid onto polyester fabric was investigated with accelerated electron beams as ratiation source at high dose rates. Homopolymerization was suppressed by addition of cations which is known as homopolymerization inhibitor, but this practical advantage was obtained at the expense of grafting efficiency. The rate of grafting (%/sec) was proportional to the 0.82th power of dose rates over the range from 1.6$\times$10$^{6}$ to 10$\times$10$^{6}$ rad/sec. The grafted polyester fabric showed considerable improvement in moisture regain and antistatic properties.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.740-747
• /
• 2014

Background Autologous fat graft has become a useful technique for correction of acquired contour deformity in reconstructed breasts. However, there remains controversial regarding the efficacy and safety of the practice for reconstructive breast surgery. Methods A retrospective review was performed on 102 patients who had secondary fat grafting after breast reconstruction. Fat harvest, refinement and injection were done by Coleman's technique. All patients were followed up postoperatively within 1 month and after 6 months including physical examination and ultrasonography. In 38 patients, the reabsorption rate was calculated by serial changes of thickness between skin and pectoral fascia in the ultrasonic finding. Locoregional recurrence rate was compared with control group of 449 patients who had breast reconstruction without fat graft in the same time period. Results Average 49.3 mL fat was injected into each breast. The most common location of fat graft was upper pole, followed by axilla, lower and medial breasts. During 28.7 months of average follow-up period, 2.9% of total patients had symptoms of palpable mass on fat graft side and ultrasonography identified fat necrosis and cyst formation in 17.6% of the patients. Calculated fat reabsorption rate was 32.9%. Locoregional recurrence was occurred in 1 patient (0.9%) and the rate was not different significantly with control group (2%). Conclusions Although further studies are required to provide surgeons with definitive guidelines for the implementation of fat grafting, we propose autologous fat graft is an efficient and safe technique for secondary breast reconstruction.

• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.379-384
• /
• 2001

To enhance the smooth graft-taking of grafted seedlings, the excessive evapotranspiration from grafted seedlings just after grafting should be avoided. A measurement system of the evapotranspiration rate of grafted seedling under artificial lighting was set up to investigate the effect of physical environment on the evapotranspiration and graft-taking characteristics of grafted seedlings quantitatively. The evapotranspiration rate of grafted seedlings affected by relative humidity and light intensity were analyzed using the measurement system. The hypocotyl of watermelons (Citrullus vulgaris cv. Sweetdew, Hungnong Seed Co.) was slantly cut and then inserted into a hole on the stem of rootstock (Lagenaria siceraria cv. FR-King, Hungnong Seed Co.). Grafted seedlings were healed and joined for 5 days under cool-white fluorescent lamps (FL20SEX-d/18, Keumho Electric Co.) with photoperiod of 12h$.$d$\^$-1/ except dark period for one day after grafting in a closed graft-taking enhancement system developed by Kim(2000). The evapotranspiration rate and graft-taking of grafted seedling at air temperature of 23$\^{C}$ and air current speed of 0.1m$.$s$\^$-1/ was highly affected by relative humidity. But light intensity showed higher effect on the stem length of scion than relative humidity. In conclusion, it was suggested that relative humidity should be controlled at higher than 90% with photosynthetic photon flux of 50$\mu$mol$.$m$^2$$.$s$\^$-1/ to increase the survival of grafted seedlings and to produce healthy seedlings.

• The Journal of the Korean dental association
• /
• v.53 no.9
• /
• pp.628-643
• /
• 2015

Purpose: The aim of this retrospective study was to compare marginal bone loss and survival rates of double short implants(multiple implant) which had been installed and restored in severely atrophic maxillary molar site without a grafting procedure. Material and Method: The subjects were patients (90 patients, 180 implants) who had been installed double short implants in severely atrophic maxillary single molar site without bone augmentation procedure from 2006 to 2014 in dental clinic in Chuncheon city. Following data were collected from dental records and radiographic panoramic views: patient's age, gender, smoking status, implant site, timing of implant installation, residual ridge height. The correlation between those factors and survival rate and marginal bone loss were analyzed. Statistical analysis was performed using Chi-square test, Student's t- test and ANOVA. Result: Eleven implants in 6 patients failed and the cumulative survival rate was 93.9%. No significant differences were found in relation to the following factors: patient's age, gender, implant site, timing of implant installation (P> .05). There were significant differences in smoking status and residual ridge height(P< .05). The average follow-up time was $45{\pm}14.7months$. The mean marginal bone loss of survived 169 implants was $0.08{\pm}0.59mm$. Conclusion: Despite the short term outcomes, the survival rate of double short implants was comparable to normal length implants. This study demonstrated that placement of double short implants without the use of bone grafting procedure for severely atrophic posterior maxilla is a simple and predictable treatment procedure.

• Journal of Chest Surgery
• /
• v.52 no.3
• /
• pp.155-161
• /
• 2019

Background: Coronary artery bypass grafting (CABG) is being offered increasingly frequently to octogenarians. However, old age is known to be an independent risk factor in CABG. The aim of this study was to compare the outcomes of off-pump coronary artery bypass (OPCAB) between octogenarians and septuagenarians. Methods: We retrospectively reviewed the data of 1,289 consecutive patients aged ${\geq}70years$ who underwent OPCAB at a single institution between 2001 and 2016. We compared the outcomes of 115 octogenarians and 1,174 septuagenarians. Using propensity score matching, based on preoperative clinical characteristics, 114 octogenarians were matched with 338 septuagenarians. Results: Propensity score analysis revealed that the incidence of acute kidney injury (14.9% vs. 7.9%, p=0.028) and respiratory complications (8.8% vs. 4.2%, p=0.040) was significantly higher in octogenarians. The early mortality rate (2.6% vs. 1.0%, p=0.240) and 1-year survival rate (89.5% vs. 94.4%, p=0.097) were not statistically significant between the groups. However, the 5-year survival rate (67.3% vs. 79.9%, p<0.001) was significantly lower in octogenarians. Previous myocardial infarction and a left ventricular ejection fraction ${\leq}35%$ were associated with a poor 1-year survival rate. Conclusion: Early and 1-year outcomes of OPCAB in octogenarians were tolerable when compared with those in septuagenarians. OPCAB could be a suitable option for octogenarians.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.322-327
• /
• 2013

This research was conducted to elucidate the appropriate light environment right after grafting to produce vigorous cherry tomato seedlings. Tomato plants were grafted and then treated in 4 different ways: to keep in the natural light (Non), to cover the grafted stem part with aluminum foil to make only that part dark (Part), to put the grafted seedlings in the acclimation room for two (Day-2) or four days (Day-4) to make the whole seedlings in the dark condition. Tube grafting method was used for grafting, in which silicon tube of 1.5mm in diameter was used. The survival rate was the maximum in the treatment Day-2. The SPAD value, seedling quality and yield of $1^{st}$ and $2^{nd}$ cluster were the best in the treatment Part. The treatment Part needs cost more than other treatments but is more economic thanks to higher yield. Therefore it was concluded to be economically feasible to make the grafted stem part dark right after grafting in case of cherry tomato.

• Journal of Plant Biotechnology
• /
• v.32 no.1
• /
• pp.45-50
• /
• 2005

Virus-free stocks was produced by the combination of the heat treatment of virus infected plant and shoot-tip grafting (STS). To produce virus-free stocks, the plants infected with citrus viruses were used for virus-free stock production using the modified method of STG in thermotherapy at $40^{\circ}C$ for 16 hours in the light, and at $30^{\circ}C$ for 8 hours of darkness for 4 weeks. Trifoliate orange (P. trifoliata) were used as rootstock seedling for STG. Percentages of virus-free stocks against citrus tristeza virus (CTV), satsuma dwarf virus (SDV) and citrus tatter leaf virus (CTLV) were $75.7\%,\;100.0,\%\;82.6\%$ respectively. Shoot tip size for successful STG were as small as possible. Less than $0.3\;\cal{mm}$ of shoot tips gave the hight efficiency of virus free plants but survival rates were low. And, survival rate after shoot-tip culture was analyzed and the rates were dependant on the cultivars; Yuzu cultivar showed the hight survival rate ($74.6\%$) and early satsuma mandarin (Iwasagi) was $13.3\%$ as the lowest cultivar. But citrus trees were not succeed to grown, turned brown, and died.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.531-537
• /
• 2009

Purpose: Alveolar bone grafting has become an essential process in the treatmemt of alveolar cleft patient for stabilization of the maxillary arch, elimination of oronasal fistula, the reconstruction of the soft tissue nasal base support, and creation of bony support for tooth eruption for implant. The use of Autologous iliac cancellous bone is preferable because of the adequate quantity and high osteoinductive potential. However, even with iliac bone, insufficient osteoregeneration and absorption occur due to several factors such as the patient's age, cleft width, functional stress, and others. In order to increase osteoregeneration where the iliac bone is placed, the present study is associated with bone marrow aspirate (BMA). The experimental study evaluated the efficacy of osteoregeneration in normal cleft rabbits when alveolar bone grafting was performed with autologous iliac corticocancellous bone. Methods: Twenty - four New Zealand White rabbits were divided randomly into 2 groups (BMA, control). All animals underwent harvesting of corticocancellous bone graft from the right posterior iliac crest via standard surgical technique. $1m{\ell}$ of BMA were obtained by scraping the needle and aspirate with $10m{\ell}$ syringe from the contralateral iliac bone wall. The muco - periosteal flap on the palate was elevated. A mixture of Equal bone's volumes with BMA and saline as its control was inserted into the cleft. Animals were sacrificed at 2, 4, and 8 weeks and maxilla was harvested for dental peri - apical X-ray, bone matrix density (BMD),and histologic analysis. Result: BMD of regenerated bone to the cleft in the rabbits was higher than that of the control rabbits. X-ray, histologic analysis showed that increased osteoregeneration and low absorption rate were observed in the BMA group. Conclusion: Our experimental study showed BMA enhanced the osteoregeneration and survival rate of alveolar bone grafting. BMA is easy to extract & cost - time effective. So it can be an effective enhancers for bone grafting mixtures.