• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.537-543
• /
• 2008

Crosslinked agar-g-poly(acrylic acid) (x-agar-g-PAA) super absorbent with a water absorbency ($Q_{H2O}$) of approximately 660 g/g was synthesized by the copolymerization of agar with an acrylic acid monomer. KPS and MBA were used as the initiator and crosslinker, respectively. Grafting was performed in air. Infrared spectroscopy was used to identify the product of copolymerization. The optimum conditions to synthesize the x-agar-g-PAA superabsorbent were 0.1 g of agar, 0.1 g of the KPS initiator, for 15 min; 50% AA monomer, 0.005 g of the MBA crosslinker, for a propagation time of 5 min; and 1 M NaOH for 15 min to allow for saponification. The reaction temperature was $80{^\circ}C$.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.291-295
• /
• 2002

Atomic force microscopy(AFM) was used to study the polyethylene(PE) surfaces grafted and immobilized with acrylic acid by Ar plasma treatment. The topographical images and parameters including RMS roughness and Rp-v value provided an appropriate means to characterize the surfaces. The plasma grafting and immobilization method were a useful tool for the preparation of surfaces with carboxyl group. However, the plasma immobilization method turned out to have a limitation to use as a means of preparation of PE surface with specific functionalities, due to ablation effect during the Ar plasma treatment process.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.1
• /
• pp.54-62
• /
• 1994

The expanding technique of the Stochastic Finite Element Method(SFEM) is proposed in this paper for adapting direct integration methods in stochastical dynamic analysis of structures. Grafting the direct integration methods and the SFEM together, one can deal with nonlinear structures and nonstationary process problems without any restriction. The stochastical central diffrence and stochastic Houbolt methods are introduced to show the expanding technique, and their adaptabilities are discussed. Results computed by the proposed method (the Stochastic Finite Element Method in Dynamics: SFEMD) for two degree-of-free- dom system are compared with those obtained by Monte Carlo Simulation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.217-227
• /
• 1998

Calcium sulfate(plaster of Paris) has been used in dental and orthopedic surgery for about 100 years. It is well known that the plaster is bioresorbable, biocompatible, defect conformable and moldable. The purpose of this study is to evaluate two effects of calcium sulfate on bone regeneration, that is, the effects of graft materials and barrier for bone regeneration. Cortical bone defects were formed for recipient site on the femurs of 19 Sprague-Dawley rats. The autogenous particulated bone and calcium sulfate were grafted to the defects. Calcium sulfate paste, $Gore-Tex^R$ membrane(W.L. GORE & ASSOCIATES LTD., U.S.A.) and rubber sheet were used for the shielding materials. The results were as follows : 1. Calcium sulfate that had been grafted in the cortical bone defect was almost resorbed before bone remodeling, resultantly had little effect on bone regeneration. 2. Resoption process of calcium sulfate grafted on the bone grafting area tends to be accelerated, as being divided into numerous small particles progressively. Under the situation where the calcium sulfate was protected, with the coverage of fascia, $Gore-Tex^R$ membrane or rubber sheet, new bone formation was confirmed with presence of calcium sulfate particles over 6 weeks after grafting. 3. In the case of calcium sulfate covered with membrane, distinct bone formation was observed on the marrow space of femur adjacent to the plaster mass. 4. Rubber shielded plaster group revealed new bone trabeculae under the rubber sheet, but it showed ischemic degeneration of superficial cortical bone.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.2
• /
• pp.83-91
• /
• 2011

Mesoporous titanium dioxide ($TiO_2$) thin films were prepared using poly(vinyl chloride)-graft-poly(N-vinyl pyrrolidone) (PVC-g-PVP) as a templating agent via sol-gel process. Grafting of PVC chains from PVC backbone was done by atom transfer radical polymerization (ATRP) technique. The successful grafting of PVP to synthesize PVC-g-PVP was checked by fourier-transform infrared spectroscopy (FT-IR) and gel permeation chromatography (GPC). The carbonyl group interaction of PVC-g-PVP graft copolymer with $TiO_2$ was confirmed by FT-IR. The porous morphologies of the $TiO_2$ films genereated after calcination at $450^{\circ}C$ was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The mesoporous $TiO_2$ films with 580 nm in thickness were used as a photoelectrode for solid state dye sensitized solar cell (DSSC) and showed an energy conversion efficiency of 1.05% at 100 $mW/cm^2$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.69-73
• /
• 2010

The melt grafting of unsaturated silanes onto polypropylene (PP) in a twin-screw extruder and crosslinking in hot water were studied to enhance impact strength of polypropylene. The influence of grafting formulations on the melt flow rates of grafted PP and the gel percentages of crosslinked PP was investigated. 3-methacryloylpropyltrimethoxysilane (VMMS) unsaturated silane monomer was used. Benzoyl peroxide, (BPO) and Dicumyl peroxide (DCP) were used as an initiator. When benzoyl peroxide (BPO) was used as an initiator, higher gel percentage and impact strength than those of DCP has been observed. The maximum impact strength was obtained with 0.7 phr of BPO and 2phr of VMMS. The value is 8.7 kgf-cm/cm and it is on a parity with the value of with 20 phr of EOR mixed to PP.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.269-275
• /
• 2004

To graft N-isopropylacrylamide (NIPAAm) onto alginate, varying dosages of ${\gamma}$-rays were irradiated onto alginate films in deionized water and methanol media, which are non-solvents of alginate. We investigated the hydrogels graft ratio, mechanical strength, swelling kinetics and ratio, and behavior with respect to drug release. The graft yield of NIPAAm increased upon increasing the irradiation dose. The use of the aqueous solution increased the graft yield relative to that obtained in methanol. The mechanical strength of the grafted hydrogels increased after grafting with NIPAAm. In a study of the swelling kinetics, we found that all hydrogels reached an equilibrium swollen state within 3 h. The equilibrium swelling ratio of the hydrogels decreased upon increasing the irradiation dose. The swelling ratio of the hydrogels decreased dramatically between 30 and 35$^{\circ}C$ because phase separation of NIPAAm occurred at 32$^{\circ}C$. The swelling process, with respect to the temperature change, was repeatable. An NIPAAm-grafted alginate containing a drug sustained its release rate until 3 h after an initial high drug release caused by a burst effect.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.261-266
• /
• 2008

A variety of end-functionalized polymers were grafted spontaneously onto multi-walled carbon nano-tubes (MWNTs) using a solution mixing process. The end-functional groups of the polymers underwent noncovalent grafting to the defect sites at the surface of the purified MWNTs through zwitterionic interaction or hydrogen bonding. The physically grafted polymers including polystyrene (PS), poly(methyl methacrylate) (PMMA), polyethylene oxide (PEO), and polydimethylsiloxane (PDMS) provided sufficient compatibility with an organic solvent or polymer matrix, such that the nanotubes could be finely dispersed in various organic media. This approach is universally applicable to a broad range of polymer-solvent pairs, ensuring highly dispersed carbon nanotubes through simple solution mixing.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.207-221
• /
• 2022

The shortcomings of the previous Crime Prevention Through Environmental Design (CPTED) theory in practice have led to the limitations of the conventional crime prevention design process. The purpose of this study is to analyze the graftability of the third generation CPTED theoretical framework and the Double Diamond design process from a design perspective. Thus, the third generation CPTED visualization design process is proposed to be grafted with the Double Diamond design process. In the study, the propositions, goals, strategic approaches, and liveability principles of the third-generation theoretical framework are clarified according to the relevant studies by scholars. In addition, the study identifies the limitations of conventional crime prevention design processes in terms of practicality and effectiveness, based on corrections from research in different scientific fields. On this basis, the Framework of Innovation of the British Design Council was used to clarify the benchmarks and foundations for the grafting of the third-generation theoretical framework and the Double Diamond design process. In addition, the details of the grafting are analyzed and explained in terms of phase outputs and phase activities. The significance of the study is that the third-generation CPTED visualization design process, which is grafted to the Double Diamond design process, can help residents to implement behaviors that reflect their self-worth and create a state of engagement. As well, it can inform the collaboration between design and non-design staff in CPTED projects.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.531-537
• /
• 2009

Purpose: Alveolar bone grafting has become an essential process in the treatmemt of alveolar cleft patient for stabilization of the maxillary arch, elimination of oronasal fistula, the reconstruction of the soft tissue nasal base support, and creation of bony support for tooth eruption for implant. The use of Autologous iliac cancellous bone is preferable because of the adequate quantity and high osteoinductive potential. However, even with iliac bone, insufficient osteoregeneration and absorption occur due to several factors such as the patient's age, cleft width, functional stress, and others. In order to increase osteoregeneration where the iliac bone is placed, the present study is associated with bone marrow aspirate (BMA). The experimental study evaluated the efficacy of osteoregeneration in normal cleft rabbits when alveolar bone grafting was performed with autologous iliac corticocancellous bone. Methods: Twenty - four New Zealand White rabbits were divided randomly into 2 groups (BMA, control). All animals underwent harvesting of corticocancellous bone graft from the right posterior iliac crest via standard surgical technique. $1m{\ell}$ of BMA were obtained by scraping the needle and aspirate with $10m{\ell}$ syringe from the contralateral iliac bone wall. The muco - periosteal flap on the palate was elevated. A mixture of Equal bone's volumes with BMA and saline as its control was inserted into the cleft. Animals were sacrificed at 2, 4, and 8 weeks and maxilla was harvested for dental peri - apical X-ray, bone matrix density (BMD),and histologic analysis. Result: BMD of regenerated bone to the cleft in the rabbits was higher than that of the control rabbits. X-ray, histologic analysis showed that increased osteoregeneration and low absorption rate were observed in the BMA group. Conclusion: Our experimental study showed BMA enhanced the osteoregeneration and survival rate of alveolar bone grafting. BMA is easy to extract & cost - time effective. So it can be an effective enhancers for bone grafting mixtures.