• Journal of Chest Surgery
• /
• 제14권1호
• /
• pp.9-16
• /
• 1981

Twenty eight patients with conpnital heart disuse underwent lung biopsy to assets pulmonary obstructive vascular disease at cardiac surpry. Thirteen patients had patent ductus arteriosus, 10, ventricular septal defects and S, atrial septal defects. The aaes were between 2 and 30 years. In patients with patent ductus arteriosus lung biopsy was performed from the IIngular Hlment. The anterior seament of the right upper lobe was blopsled in cases with ventricular septal defect and atrial septal defect. Grading of pulmonary obstructive vascular disease could not be assessed In 9 cases. In 2 cases poor quality of the slides made us impossible to evaluate and In 7 cases there were no suitable small muscular arteries to evaluate in the slides of lung tissue especially taken from the IIngular seament. Nineteen cases were evaluated pulmonary obstructive vascular disease. Among them 17 cases had Heath-Edwards changes of grade 1 and 2 patients had that of grade 3. The thickness of media was measured. It was expressed as percentage of medial thickness to outer diameter of artery. The medial thickness was correlated proportionally with elevation of pulmonary arterial pressure and pulmonary vascular resistance to systemic vascular resistance ratio. There were no complications related to the procedure of lung biopsy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.385-390
• /
• 1997

In the mixing proportion of high flowing concrete we have to use quantity of power such as cement and superplasticizer, and increase the proportion of fine aggregate more than that of plain concrete to increase flowability and segregation resistance. Therefore, the fresh state of high flowing concrete is largely affected by superplasticizer and change of grade the percentage of surface water. This study aims at development of self-filling up high flowing concrete without compaction, in case of using the fine aggregate of standard grade range, by examination on the influence of fresh state of high flowing concrete, and by understanding influence on various fluidity such as flowability, reinforcement passibility, fillingability, segregation resistance.

• Journal of Welding and Joining
• /
• 제30권2호
• /
• pp.76-80
• /
• 2012

In this study, the effect of the welding current on the hardness characteristics and microstructure in the resistance spot welding of 1GPa grade cold-rolled DP steel was investigated, Also, correlation between the hardness and microstructure was discussed. In spite of the change in the welding current, the hardness distributions near weld was similar. the hardness in the HAZ and the fusion zone was higher than that of the base metal and the hardness in the fusion zone was variated with the location. Especially, the hardness of HAZ adjacent to the base metal showed maximum value, and softening zone in the base metal adjacent to HAZ was found. With the increasing of welding current, there were no difference in maximum hardness and average hardness in the fusion zone were, but the hardness of the softening zone reduced. The difference in the hardness in each location of weld due to grain size of prior austenite. The softening of the base metal occurred by tempering of the martensite.

• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.193-200
• /
• 2023

Titanium alloy (grade-4) is commonly used in industrial and medical applications. To improve its corrosion resistance and biocompatibility for medical use, it is necessary to form a titanium oxide film. In this study, the morphology of the oxide film formed by anodizing Ti-grade 4 using different electrolytes was analyzed. Wetting properties before and after surface modification with SAM coating were also observed. Electrolytes used were categorized as A, B, and C. Electrolyte A consisted of 0.3 M oxalic acid and ethylene glycol. Electrolyte B consisted of 0.1 M NH₄F and 0.1 M H₂O in ethylene glycol. Electrolyte C consisted of 0.07 M NH₄F and 1 M H₂O in ethylene glycol. Samples B and C exhibited a porous structure, while sample A formed a thickest oxide film with a droplet-like structure. AFM analysis and contact angle measurements showed that sample A with the highest roughness exhibited the best hydrophilicity. After surface modification with SAM coating, it displayed superior hydrophobicity. Despite having the thickest oxide film, sample A showed the lowest insulation resistance due to its irregular structure. On the other hand, sample C with a thick and regular porous oxide film demonstrated the highest insulation resistance.

• 콘크리트학회지
• /
• 제18권5호
• /
• pp.10-13
• /
• 2006

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.200-201
• /
• 2005

• 대한토목학회논문집
• /
• 제26권2D호
• /
• pp.285-292
• /
• 2006

본 연구에서는 국내에서 개발된 Full-Scale 포장가속시험기(HAPT; Hanyang Accelerated Pavement Tester)를 소개하고, 이 시험의 시험운영과 함께 개질아스팔트 혼합물과 일반 밀입도 아스팔트 혼합물의 소성변형 저항성 비교 연구를 수행하였다. 포장가속시험은 일반 밀입도와 3종의 개질아스팔트 각각에 대해 3가지 온도조건(25-30, 40, $50^{\circ}C$)에서 소성변형 저항성을 평가하였으며, 이 평가 결과들은 DSR실험등 바인더의 실내실험 결과들과도 비교하였다. 포장가속시험을 통한 소성변형 발생량을 분석한 결과, 시험 대상이 된 모든 개질아스팔트 구간에서 일반 밀입도에 비해 소성변형 저항성이 큰 것으로 나타났다. 특히 고온조건에서는 그 차이가 매우 크게 나타났다. 일반 밀입도 아스팔트포장을 대상으로 포장온도 증가에 따른 소성변형 저항성을 분석한 결과 온도가 어느 이상 되면 소성변형 저항성이 급격히 떨어짐을 알 수 있었다. 또한 소성변형에 관련한 중요한 인자로 제시되는 $G^*/sin{\delta}$는 소성변형 저항성을 잘 나타내고 있는 것으로 나타났다. 반면에 회복탄성계수는 소성변형 저항성을 나타내는 인자로 바람직하지 않음도 확인하였다.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.272-276
• /
• 2017

The response of AISI 310 type austenitic stainless steel to the novel low temperature plasma carburizing process has been investigated in this work. This grade of stainless steel shows better corrosion resistance and high temperature oxidation resistance due to its high chromium and nickel content. In this experiment, plasma carburizing was performed on AISI 310 stainless steel in a D.C. pulsed plasma ion nitriding system at different temperatures in $H_2-Ar-CH_4$ gas mixtures. The working pressure was 4 Torr (533Pa approx.) and the applied voltage was 600 V during the plasma carburizing treatment. The hardness of the samples was measured by using a Vickers micro hardness tester with the load of 100 g. The phase of carburized layer formed on the surface was confirmed by X-ray diffraction. The resultant carburized layer was found to be precipitation free and resulted in significantly improved hardness and corrosion resistance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.7-10
• /
• 2011

In this study, evaluation system of impact resistance performance is proposed. Compressive strength of concrete is 40, 60 and 80MPa. It evaluate impact resistance performance to use projectile 6, 7 and 8mm size. As a result, safety performance is more higher when the compressive strength is increased in. Compared with Hughes's formula, evaluation system of impact resistance performance is appropriated.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.73-78
• /
• 2003

In this Study, we examined the influence of characteristics of rolling loads by casters on separation resistance of substrate concrete and synthetic resin floor coating. In the experiment, we first prepared floor samples having substrate concrete of various compressive strength, surface hardness and surface configurations, then put the coated samples to the test of separation resistance with Rolling Caster Loading Machine. Three loading conditions consisted of different kinds of casters, rolling conditions, and coating materials. Consequently, we clarified that the grade of separation resistance varied widely according to the characteristics of substrate concrete and rolling loads.